Airport Jobs in United States of America

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Global Services is searching for F/A-18 Engine propulsion mechanic at Naval Air Station (NAS) Joint Reserve Base (JRB) New Orleans in Belle Chasse, Louisiana. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at NAS JRB New Orleans in Belle Chasse, Louisiana. This position may be required to work at Stennis Facility in Kiln, Mississippi as required. Position Responsibilities: Technician maintains the following: Aircraft propulsion, fuel, and associated equipment Remove and install propulsion related components and gear Perform Daily, pre and post flight and periodic aircraft inspections. Perform flight operation activities to include daily, turnaround, launch and recovery including plane captain activities Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction. Works under general direction. Prioritizes quality, product and people safety This position requires the ability to obtain a U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Basic Qualifications (Required Skills/Experience): Minimum of 5 years of experience in military fighter aircraft maintenance Willing to work variable shifts; including days, evenings, nights and weekends Must be able to lift up to 35 pounds Minimum of 1 year of experience reading and interpreting technical publications, safety rules, operating and maintenance instructions and procedure manuals Must be able to work outdoors under all types of weather conditions with exposure to loud noise and exhaust fumes Preferred Qualifications (Desired Skills/Experience): Fighter Structural modification experience F/A-18 (AD) Qualifications Prior experience with Navy 4790.1 requirements, is preferred Typical Education/ Experience: Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years of related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years of related work, Bachelor, etc.). Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. This position is eligible for a Stipend payment in addition to salary for eligible candidates. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $59,500 - $80,500 Applications for this position will be accepted through 7/15/25 Applications for this position will be accepted until Jul. 14, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Overview The Solairus Aviation Maintenance Supervisor will conduct or lead all aspects of maintenance performed on assigned aircraft and ensuring compliance to company policies and procedures regarding airworthiness standards. Specific duties include, but are not limited to, routine maintenance tracking, long term planning, scheduling and completion of maintenance events, and financial responsibility for costs incurred associated with maintenance operations. This position reports to the Director of Maintenance, and/or the Client Aviation Manager (CAM). Essential Responsibilities/Duties Maintain a valid Airframe and Powerplant Certificate. Lead all maintenance activities of assigned aircraft, to include implementing the maintenance standards, methods, and procedures established by Solairus Aviation to ensure compliance with Federal Aviation Regulations, manufacturer’s recommendations and company policies. Coordinate maintenance training requirements with the DOM and/or CAM. Develop a budget outlining and projecting financial expenses related to aircraft maintenance, parts & labor, tooling, equipment and base facilities. Supervise and approve expenditures related to assigned aircraft. Participates in the Safety Management Systems; and Assumes any duties delegated by the DOM, Manager of Maintenance Operations, and CAM. Supervises aircraft maintenance personnel (both company employees and non-company personnel), including aircraft interior and exterior cleaning, and ensuring the quality and completeness of maintenance performed under the authority of the Director of Maintenance. Coordinates with all non-company personnel or Approved Maintenance Organizations (AMOs) performing maintenance on company aircraft with Manager of Maintenance Operation, DOM, and CAM, and conduct vendor evaluations for outside maintenance. Ensures that complete records of all inspections, repairs and component changes, airframe flight time, engine times, AD notes, Service letters from the airframe, engine and component manufacturers, and FAA maintenance instructions are accurately maintained. Ensures compliance with Airworthiness Directives (ADs) and Service Bulletins affecting company aircraft. Removes known unsafe aircraft and those that do not comply with the CFRs from service, and ensures the airworthiness of aircraft returned to service. Ensures operational readiness of the aircraft with as little schedule impact as practical. Serves as liaison between the company and the FAA regarding all maintenance policies. Maintains certification and technical recency requirements per 14 CFR 65.83. Performs internal audits of tool calibration and material control and ensure that adequate tools, parts, materials, support equipment, and facilities are available to perform scheduled and unscheduled maintenance Qualifications Must hold a valid A&P Certificate. Minimum 10 years’ experience in Corporate Aircraft Maintenance Operations. Demonstrates knowledge of the CFRs and aircraft maintenance standards. Proficient with planning, implementation, and direction of the maintenance programs and control system for the aircraft operated. Be a highly motivated individual committed to Safety, Regulatory Compliance, and Operational Excellence! Remains fit for duty and abstain from drug and alcohol abuse. Specific Qualifications/Certifications Recent experience in Global 6500 (6 months within the past 24 mos.). Must be located or willing to relocate to within 1.5 hours of KFRG. Additional Information Solairus is a private aviation services company assisting aircraft owners with the safe, reliable, and efficient management and operation of their aircraft. Headquartered in the beautiful California Wine Country, Solairus Aviation is a destination employer offering nationwide operating bases, a stimulating work environment, and an array of modern benefits to employees. From a generous 401K matching structure to employee wellness programs and top-notch health benefits, Solairus firmly believes our team members are our greatest asset and we are committed to providing an exceptional employment experience. Solairus collects salary range information based on market conditions from multiple industry sources. Solairus crewmembers are paid $50,000 to $500,000 based on geographic area, experience, equipment type/aircraft, job duties, training, and the assigned account. Solairus Aviation embraces diversity and equal opportunity. We are committed to building a team that represents a variety of backgrounds, perspectives, and skills. The more inclusive we are, the better our work will be!

The ISR (Intelligence, Surveillance & Reconnaissance), Aviation, and Security (IAS) business area is a leader in ISR and aviation, it is a leading prime manned and unmanned aircraft systems integrator for innovative, high-performance ISR and aviation systems. Its end-to-end Command, Control, Computers, Communications and Intelligence, Surveillance & Reconnaissance (C4ISR) capabilities encompass design, integration, test, certification, ground/flight training and complete logistics support. IAS tailors solutions to customer cost, performance, and schedule requirements and designs to consistently exceed expectations – with an unrivaled record of on time and on (or under) budget deliveries. SNC has led thoughtful and disruptive change in the aerospace and defense industry for the past 60 years and now, we’re applying this tenacity and expertise to the U.S. Air Force’s (USAF) Survivable Airborne Operations Center (SAOC) mission. Join the SNC-led SAOC team and be a part of exciting and meaningful work to modernize and deliver the next-generation SAOC aircraft trusted by the President, Secretary of Defense and Chairs of the Joint Chiefs of Staff to ensure continued critical command, control and communication during national emergencies. If you’re passionate about building the airborne command post of the future, consider SNC for your next mission. Learn more about NC3 and SAOC here. Do you enjoy being the resident expert mentoring others in your area of expertise? Join our team and take your career to new heights! As an Engineering Technician V, you will be regarded as a Subject Matter Expert (SME) and use your skills and expertise to perform a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. You'll be responsible for constructing, troubleshooting, calibrating, testing, and maintaining our equipment, components, devices, or systems. You'll ensure our systems and components meet established specifications. Responsibilities: Serve as the weapon system focused technician, responsible for all aspects of coordination across functional, operational and engineering domains. Qualifications You Must Have: Associate's degree in a related field of study, at least 10 years of relevant experience A higher-level degree may substitute for experience Related experience may be considered in lieu of required education Ability to understand and interpret complex technical schematics, diagrams, blueprints, manuals and/or publications Comprehensive understanding of the use of standard laboratory test equipment, spectrum analyzers, network analyzers, Oscilloscope, Pitot static equipment, other measurement equipment, hand tools, and power tools Qualifications We Prefer: Previous management or lead experience; the ability to recruit employees; assign, direct, and evaluate their work; and oversee the development and maintenance of staff competence Federal Aviation Administration (FAA) Airframe and Powerplant certification and Inspection Authorization (IA) Designation Knowledge of FAA regulations, policies, and procedures Background in the Aerospace and Defense Industry, the US Department of Defense or US Military FAA Certificated Airframe and Powerplant (A&P) License (Required). Minimum 10 years of aircraft line maintenance experience. At least 5 years of supervisory experience in aircraft line maintenance Supervision. Working knowledge of 14 CFR Part 121 Federal Aviation Regulations SNC offers a generous benefit package, including medical, dental, and vision plans, 401(k) with 150% match up to 6%, life insurance, 3 weeks paid time off, tuition reimbursement, and more. IMPORTANT NOTICE: This position requires the ability to obtain and maintain a Top Secret U.S. Security Clearance. U.S. Citizenship status is required as this position needs an active U.S. Security Clearance for employment. Non-U.S. Citizens may not be eligible to obtain a security clearance. The Department of Defense Consolidated Adjudications Facility (DoD CAF), a federal government agency, handles the adjudicative aspects of the security clearance eligibility process for industry applicants. Adjudicative factors which affect the outcome of the eligibility determination include, but are not limited to, allegiance to the U.S., foreign influence, foreign preference, criminal conduct, security violations and illegal drug use. Learn more about the background check process for Security Clearances. SNC is a global leader in aerospace and national security committed to moving the American Dream forward. We’re known and respected for our mission and execution focus, agility, and disruptive and rapid innovation. We provide leading edge technologies and transformative solutions that support our nation’s most critical security needs. If you are mission-focused, thrive in collaborative environments, and want to make our country stronger with state-of-the-art technologies that safeguard freedom, join our team! SNC is an Equal Opportunity Employer committed to an environment free of discrimination. Employment decisions are made based on merit without regard to race, color, age, religion, sex, national origin, disability, status as a protected veteran or other characteristics protected by law.

We're looking for detail-oriented *Avionics Technicians* who are passionate about electronics, diagnostics, and hands-on repairs. If you enjoy working with complex systems and want to be part of a high-performing team in the aerospace industry, we’d love to meet you. *Why You’ll Love This Role* You'll be part of a company that values skill, precision, and innovation. This role is ideal for individuals who thrive on solving electrical challenges and working on cutting-edge avionics technology. *What You’ll Do* * Install, test, troubleshoot, and maintain avionics systems, including communication, navigation, and flight control systems * Use diagnostic tools (like multimeters) to identify and resolve electronic issues * Read and interpret technical drawings, schematics, and wiring diagrams * Perform hands-on repairs—including soldering and component rebuilds * Ensure compliance with FAA regulations and quality standards * Document all maintenance, repair, and inspection work * Collaborate with a supportive team and contribute to continuous improvement * Lift and maneuver equipment as needed (some physical work involved) *What We’re Looking For* * Experience as an Avionics Technician or in a related electronics repair field * Comfort with soldering and using electrical testing tools * Familiarity with schematics, wiring diagrams, symbols, and production illustrations * Strong attention to detail and ability to work independently * Team-oriented with good communication skills * Able to handle physically demanding tasks and occasional heavy lifting *Preferred but Not Required* * Previous experience in aerospace MRO or aviation manufacturing * FAA certifications or training in avionics repair *Benefits & Perks* * Competitive hourly pay based on experience * Opportunities for growth within a fast-growing aerospace company * On-the-job training and cross-functional learning * Supportive work environment and collaborative culture Job Type: Full-time Pay: From $20.00 per hour Expected hours: 40 per week Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Health savings account * Life insurance * Paid time off * Vision insurance Schedule: * 8 hour shift * Day shift * Monday to Friday * No weekends Work Location: In person

Aircraft Mechanic Location: Des Moines, IA Pay Range: $30 - $45/HR, based on experience, skills, and qualifications. Elliott Aviation, a leader in aircraft solutions, has an exciting opportunity for an Aircraft Mechanic at their facility in Des Moines, IA. As an Aircraft Mechanic, you will be part of a team working to provide outstanding products and services to our customers. Since 1936, Elliott Aviation has been a world-class provider of comprehensive and customer-focused solutions for business aviation. Our vision, building partnerships that last, applies to our employees as well as our customers. This position is responsible for inspecting, testing, adjusting, repairing, and performing other tasks related to the maintenance and repair of airframe and engine systems and components. Key Responsibilities: Performs inspections, servicing, and complex repairs on various aircraft systems and components. Efficiently and effectively troubleshoots and function tests systems, referencing manufacturer’s technical documents across a variety of airframe, engine, and component systems. Leads aircraft projects as directed by the Crew Chief and Supervisor. Expertly prepares and completes various documents for maintenance and modification record-keeping purposes, as required by FAA Airworthiness Regulations, Elliott Aviation Policies and Processes, FAA Approved Repair Station and Quality Control Manuals, and personal training logs (OJT). Proficiently and consistently locates and uses the appropriate technical data to accomplish all tasks. May require travel up to 20% of the time to other Elliott Aviation locations as needed. Supports, maintains, and complies with all Federal, OSHA, State, and local regulations, as well as Elliott Aviation’s Environmental, Health, and Safety Policies and Processes. Performs related duties, as assigned. Required Skills & Qualifications: Airframe & Powerplant (A&P) Certificate required. High school graduate or equivalency degree required. Thorough knowledge and understanding of FARs 43, 65, 91, 135, 145. Ability to attain & retain Airport Operations Area (AOA) badge or other airport requirements. Must obtain & retain designation as an Elliott Aviation Production Inspector (Blue stamp). Must possess excellent mechanical aptitude and a strong desire to work. Organizational skills and attention to detail. Ability to maintain a safe and clean work environment. Willingness to work collaboratively on a team, including mentoring junior technicians with a calm demeanor. Willingness to learn by taking guidance from others. Ability to communicate effectively in straightforward situations. 5+ years of Aircraft maintenance experience preferred. FAA Inspection Authorization (IA) preferred. General Benefits: Elliott Aviation takes pride in offering a competitive and comprehensive benefit package to its employees to ensure our team is well cared for. Benefits begin day 1 of employment! Sign-On Bonus and relocation bonus potential Health, Dental and Vision Insurance- Significant contributions are made by Elliott Aviation as part of our commitment to providing a comprehensive benefit program. You can earn lower rates through our wellness program as well. RXnGo Pharmacy benefit – Generic prescription coverage at zero cost to the employee Time Off – You will receive 8 paid holidays and paid earned time off. Relocation assistance provided for most of our positions 401(k) – Elliott offers a company match program for your retirement savings Company Sponsored short-time and long-term disability as well as life insurance Employee Assistance Program (EAP) – Confidential consultation and resources services 24/7 Training and Education- On average, Elliott Aviation invests upwards of $3,000 per team member on development of technical skills as well as soft and leadership skills

Join a global leader in private aviation. At Flexjet, we deliver unmatched premium travel experiences through fractional aircraft ownership, leasing, and jet card access. With team members in North America and Europe, we’re committed to excellence in every detail of our service and operation. We’re currently seeking a Maintenance Training Content Creator to join our Maintenance Training Department. These roles are essential to building impactful, modern, and technically accurate training content that supports technician development, safety, and regulatory compliance. This position is located on-site in Cleveland, Ohio. Key Responsibilities: Conduct thorough research to inform accurate technical training development Create engaging training content across multiple formats and media platforms Regularly revise and update materials to reflect changes in technical procedures and regulations Ensure content consistency, clarity, and accuracy through rigorous quality assurance reviews Education & Experience Requirements: FAA Airframe and Powerplant (A&P) Certification Bachelor’s degree in Aviation Maintenance Minimum of 2 years of aircraft maintenance experience 1–3 years of experience developing training or curriculum materials (preferred) Required Skills: Proficiency in Microsoft Office and digital content creation tools Strong understanding of instructional design principles and aviation training standards High attention to detail and a passion for producing accurate, high-quality training materials Ability to collaborate across teams in a fast-paced technical environment Awareness of industry trends and innovations Commitment to safety and adaptability to evolving requirements Fluent in English, with strong communication skills

A&P Aviation Maintenance Technicians perform a variety of mechanical/maintenance duties on various aircraft models, including, but not limited to, the following: diagnosis of malfunctions and required disassembly, rework, repair, replacement, reassembly, or adjustment of various aircraft systems to prepare aircraft for flight and delivery to the client. Performs intermediate/heavy maintenance tasks without supervision. Performs airframe, Powerplant, and propeller repairs and modifications and is required to meet company and FAA requirements. Performs routine inspections and troubleshooting, including airframe structures, engines, and aircraft systems. Performs turbine engine troubleshooting, inspection, repair, and engine run-ups. Conducts airframe system, component changes, and systems checkout. Installs service bulletins and kits of airframes and engines. Ability to comprehend and complete all Aircraft Manufacturer Scheduled Maintenance items. Remove and disassemble defective parts; assemble and install replacement parts; and test aircraft systems. Interprets technical manuals, drawings, and blueprints. Required to sign for work accomplished, including troubleshooting deferred to maintenance items, and ensure proper recording of all maintenance tasks on company documents. Building client invoices using labor calculations, purchase orders, and parts mark-up calculations. Uses equipment such as tensiometers, pressure gauges, dial gauges, vacuum gauges, timing lights, and various hand tools to repair or modify systems of assemblies. Keep a constant watch for safety and ensure work performed adheres to the highest quality standards. Monitor and reduce excessive cost and labor duplication. Ensure proper and adequate equipment is used, acceptable parts or components are installed, and approved hardware or supplies are used. Core Schedule: Days: Monday thru Friday. Hours: 7:30 a.m. - 4:00 p.m. Some on-call or evening/weekend hours may be required. A&P License is required. Requires a minimum of 5 years' experience with diversified jet, turboprop, piston, modification, aircraft/flight maintenance, or airframe sheet metal maintenance. Must have experience in MROs. Prior experience with Cirrus, piston, or Light to Super-Mid Business Jet Aircraft strongly preferred. Operates all power tools and equipment necessary to accomplish job assignments. Preferred experience in a client service facility performing inspections and repairs on aircraft. Valid state driver's license. Requires arithmetic, blueprints, specifications, and knowledge of jet and piston airframe and engine principles. Flexibility in scheduling is required. Must successfully pass background check and drug test. Ability to read and respond to email communications. Expect it all at Jet Access and our family of companies, which provide premier private air travel, charter, aircraft management, sales, maintenance, flight training, airport operations, and management. Our Jet Access family members are the heart of our core values, the center of everything we do, and the foundation of our success. As a growing enterprise, we are committed to providing you with the tools and resources for a long and meaningful career with us. Expect a safe, positive, fast-paced, and growth-oriented environment. Expect a culture focused on the well-being and happiness of our Team Members and their families. Expect to work with a diverse and talented group of aviation professionals. Expect your voice to be heard. Expect to matter. Your future success is our priority - Expect it all. Perks and Benefits: A generous benefit package, competitive wages, paid vacation and holidays, excellent training programs, and discounted flight training. This is a tight-knit family with a collaborative and social environment. Leadership is compassionate, transparent, and believes in empowering employees to achieve, not only for the business, but also for their own personal success.

We’re a leader in aviation maintenance, and we’re looking for an A&P Mechanic to join our team and work on high-performance business jets. In this role, you’ll play a key part in ensuring every aircraft we service meets the highest safety and reliability standards. What You’ll Do: Perform inspections, maintenance, and repairs on business jets. Read blueprints/work orders and troubleshoot mechanical issues. Keep detailed maintenance records and ensure FAA compliance. Install and repair components, including sheet metal work. Communicate with pilots and crews to resolve reported issues. What You’ll Need: FAA A&P License. Strong knowledge of aircraft mechanical systems and FAA regulations. Ability to read and understand technical documents in English. Must be 18+ and legally authorized to work in the U.S. Preferred: 4-7 years of experience, especially on business jets. What We Offer: 100% company-paid medical, dental & vision. 401(k) with 50% match up to 8%. Company-paid life & AD&D insurance. Multiple shift options and flexible schedules. Professional development opportunities and voluntary benefits. Ready to grow your aviation career? Apply today.

Amentum is seeking a Site Manger to work at HSM-40 Mayport, FL. The Site Manager is responsible for the control and conduct of all Organizational Level Maintenance Support on H-60 Aircraft, administrative, logistics, quality, financial and safety operations at the site and is to ensure all contractual requirements are met or exceeded while meeting or exceeding budget goals. Must be customer oriented. Shall act as overall manager and administrator for contract efforts at his/her site. Responsible for ensuring contract requirements are met at the respective site. Ensures sufficient resources are provided to meet PWS requirements, Amentum Internal policies and procedures, and ensures site personnel adhere to established laws, US Government directives, and Amentum policies and procedures. Supervises all contract activities and serves as the principal representative for the program in all matters pertaining to the contract at respective site. Responsible for all financial matters within the site to include establishing financial controls in order to achieve budget goals. Develops positive customer relationships with the COR and local Navy representatives. Shall be the primary interface and point of contact with local government authorities and representatives on program/project and contract issues. Conducts management meetings as necessary to ensure site is performing to customer and company expectations. Develops local management procedures and controls. Develops and assists in the development of policy and procedures to establish safe work practices and conditions. Participates in monthly Safety Review. Oversees all operational matters as they pertain to meeting successful contractual obligations. Interfaces with Program Manager and other Amentum divisions as necessary to resolve issues beyond local capability. Devotes personal attention to the morale and welfare of all employees and is responsible for providing a safe and healthful work environment. Attends meetings as requested by the customer. Ensures adherence to established standards of individual performance and discipline. Participates in the interviews of prospective employees and assist in the selection of new employees. Recommends and initiates personnel actions such as promotions, transfers, and appropriate disciplinary action. Takes the actions necessary to ensure that all personnel training, certification, and re-certification requirements are met. Reviews and approves project costs and expenditures. Identifies, studies, and implements cost saving initiatives where applicable. Must comply with established General and Industrial Safety Rules and Regulations as applicable to the contract, facilities and job assignment. Physical Demands: This classification’s activities range from an office-like environment with extensive sitting demands to a flight line-like environment with extensive climbing, standing, stooping, bending, pushing, kneeling, stretching, and walking demands. May occasionally be required to lift objects with weights that exceed 30 pounds. Special vision abilities to perform this job are close vision, depth perception, and the ability to adjust and focus. Work Environment: The diversity of work conditions may range from an office environment where there is little or no physical discomfort to a flight line environment where inclement weather may subject the individual to severe changes in temperature, wind, rain, etc. May be required to work in areas where high noise hazards prevail. May be exposed to fumes, airborne particles, and electrical shock hazards. Minimum Requirements: The Site Manager shall have 10 years of aircraft maintenance experience to include 5 years in a managerial or supervisory position managing high performance aircraft during high tempo operations. The site manager must understand the mission of HSM-40 and be able to coordinate all Contractor resources to achieve the contract objective related to aircraft maintenance. The site manager shall possess previous experience in managing a fluctuating workload, military maintenance plans and procedures. Must have extensive, thorough knowledge of aviation maintenance concepts and procedures. Must possess analytical abilities necessary to handle extremely complex administrative, organizational, and aircraft maintenance matters to respond rapidly and sufficiently to changing requirements, unexpected contingencies and other challenging situations. Must demonstrate communicative, managerial, and organizational skills necessary to effectively manager site operations. Must deal with the customer and company employees in a courteous, professional, and effective manner. Must be proficient in the use of personal computers and Windows Operating System and Microsoft Office to include as a minimum PowerPoint, Excel, and Word programs. Must be able to handle confidential information and exercise discretionary judgment. Must have a high school diploma or GED. Must possess or be able to obtain and maintain a US Government Secret Clearance. NOTE: US Citizenship is required to obtain a Secret Clearance. Must read, write, speak, and understand English. Must possess excellent oral and written communication skills as well as good decision-making skills. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status , or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Job ID: 697096BR Date posted: Jul. 03, 2025 Description: Join the Lockheed Martin Aeronautics company as an Aircraft Field Service Engineer (FSE) on our Aeronautics Field Sustainment (AFS) team! This position will support the F-35 Program at our MCAS Yuma, Arizona location. We are seeking a highly skilled and experienced Field Service Engineer (FSE) to serve as a Nose to Tail (NTT) expert, providing technical support and guidance to the USMC on-site customer. The ideal candidate will be a Subject Matter Expert (SME) in Avionics/Mission Systems (MS) and Airframe Powerplant Generalist (APG)/Vehicle Systems (VS), with a strong foundation in Supportable Low Observable (SLO)/Structures. What You Will Be Doing Responsibilities: • As a member of the Lockheed Martin Aeronautics Field Sustainment (AFS) team, the successful candidate will serve as the technical interface to the USMC on-site customer, providing expert guidance and support in resolving issues arising from maintenance and modification activities for the F-35 aircraft. This will include: • Collaborating with USMC customers to identify and resolve technical issues. • Providing expert advice and guidance on Avionics/MS, APG/VS, and SLO/Structures. • Troubleshooting and analyzing complex technical problems. • Developing and implementing effective solutions to minimize downtime and optimize aircraft availability. • Attend debriefings to aid in the rapid identification of emerging issues that require company intervention to avoid aircraft downtime. • Document all unusual operation / maintenance problems to ensure the company is apprised of and can identify emerging failure trends. • Provide training to customer personnel. Must be able to work and interact with the maintainer as well as the professional engineers from other F-35 companies as a peer. • Selected candidate must be willing and able to work second or third shift as needed. • Travel required; candidates must be willing and able to deploy with customer to possible hazardous duty locations. Long term deployments may be required both ashore and aboard Naval Ships. US Department of Defense (DoD) mandated vaccinations may be required. • Must be able to obtain F-35 Special Program Access. Must have at a Active Secret Security Clearance. Must be a US Citizen. This position is located at a facility that will require special access. Who You Are You are a strong advocate for agile methodologies, effectively implementing frameworks that enhance team collaboration and adaptability. You excel in engaging stakeholders at all levels, fostering buy-in and collaboration during change initiatives to ensure successful implementation and acceptance. As a champion of Continuous Improvement, you are dedicated in identifying opportunities for process optimization, consistently seeking ways to enhance efficiency and effectiveness. What's In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin's comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. aeroafs #OneLMHotJobs aerosystems Basic Qualifications: The following Basic Qualifications are skills that a candidate must possess to be considered for this position: 5 years total 4th or 5th Generation Aircraft experience (F-16, F-22 or F-35). Experience must include Avionics/Mission Systems (MS) and Vehicle Systems (VS)/APG. Desired Skills: The following Desired Skills are not required, but are those skills that would set a candidate apart from the others: • SLO / LO experience • Previous Field Service Engineer (FSE) experience • Fault Isolation and problem analysis experience at the sub-system level • Technical report writing skills • Experience with drawing/schematics reading and interpretation • Experience with Engineering tools to include but not limited to PDM, VAS, JEDI, JARVIS and CRE • Knowledge of CATIA & System/Software Engineering Environment (S/SEE) • Airframe & Power plant (A&P) license Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret with Investigation or CV date within 5 years Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: Non- standard 40 hour work week as assigned by leader Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: AERONAUTICS COMPANY Relocation Available: Possible Career Area: Product Support Type: Full-Time Shift: Multiple shifts available

RELOCATION ASSISTANCE: Relocation assistance may be available CLEARANCE TYPE: Secret TRAVEL: Yes, 10% of the Time Description At Northrop Grumman, our employees have incredible opportunities to work on revolutionary systems that impact people's lives around the world today, and for generations to come. Our pioneering and inventive spirit has enabled us to be at the forefront of many technological advancements in our nation's history - from the first flight across the Atlantic Ocean, to stealth bombers, to landing on the moon. We look for people who have bold new ideas, courage and a pioneering spirit to join forces to invent the future, and have fun along the way. Our culture thrives on intellectual curiosity, cognitive diversity and bringing your whole self to work — and we have an insatiable drive to do what others think is impossible. Our employees are not only part of history, they're making history. Are you ready to put your experience to work at Northrop Grumman? If so, Our Defense Systems Sector wants you to join our Team as a SCA Ground Support Equipment Mechanic Level 2. This position is located at Robins AFB, GA, and requires you to work on site daily. **This position is a Service Contract Act position. ***This position may require travel in order to support the Mission. This travel may be within the United States or internationally. While on travel, you will typically receive at a minimum, per diem and/or additional compensation dependent upon location. Relocation assistance may be available. Once employed for the role - You must be willing, able, and pass a deployment medical physical to meet short-notice worldwide travel needs to meet customer requirements. You will also be required to work any shift as/when needed. You will be responsible for accomplishing maintenance of all ground support and associated equipment to sustain aircraft maintenance operations necessary to meet all USAF E-11A mission requirements from its CONUS base location. Specific duties: 1. Conduct all ground support equipment [GSE] for a fleet of Bombardier USAF E-11A [Bombardier BD-700 commercial derivative aircraft (CDA)] fleet. 2. Conduct progressive maintenance & inspections on ground support equipment providing a maximum amount of GSE to the flight line and minimize aircraft downtime 3. Execute maintenance/upkeep, inventory, trouble shooting of all deployed GSE to include Ground Power Units, special purpose vehicles, aircraft stands, scissor/general lifts, aircraft jacks/tail stands, hydraulic servicing, generators, and other assigned equipment 4. Perform maintenance, disassembly, rework, repair, replacement, re-assembly, or adjustment of various ground support equipment systems in accordance with technical specifications and or engineering instructions 5. Conduct calibrations on aircraft jacks and other assigned GSE as necessary to meet mission requirements 6. Conduct diagnosis of malfunctions, including all electrical & mechanical troubleshooting, fault isolation & repair, parts replacement, line repairable unit (LRU) replacement, calibration tasks, testing, engine repairs and/or replacements & proper documentation 7. Use technical data to diagnose & solve maintenance problems on GSE, coordinating with original equipment manufacturers (OEMs) when necessary to ensure fully operational equipment 8. Maintain status of inspections and maintenance in CORRIDOR database inventory tool Basic Qualifications: 1. High School diploma AND a minimum of 6 years aircraft Ground Support Equipment experience. 2. Must be a US citizen 3. A current DoD Secret Security Clearance or be able to obtain one quickly. 4. Possess or quickly obtain US Passport 5. Be able to obtain/maintain a Corporate Travel Card Preferred Qualifications: 1. Current U.S. Passport 2. Working experience in CORRIDOR inventory database operations 3. Compliance with US Gov’t/DoD medical and deployment requirements #BACNFOL2 Salary Range: $30.22 - $33.24 The above salary range represents a general guideline; however, Northrop Grumman considers a number of factors when determining base salary offers such as the scope and responsibilities of the position and the candidate's experience, education, skills and current market conditions. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. Annual bonuses are designed to reward individual contributions as well as allow employees to share in company results. Employees in Vice President or Director positions may be eligible for Long Term Incentives. In addition, Northrop Grumman provides a variety of benefits including health insurance coverage, life and disability insurance, savings plan, Company paid holidays and paid time off (PTO) for vacation and/or personal business. The application period for the job is estimated to be 20 days from the job posting date. However, this timeline may be shortened or extended depending on business needs and the availability of qualified candidates. Northrop Grumman is an Equal Opportunity Employer, making decisions without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability, or any other protected class. For our complete EEO and pay transparency statement, please visit http://www.northropgrumman.com/EEO. U.S. Citizenship is required for all positions with a government clearance and certain other restricted positions.

The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. Responsible for aircraft maintenance performed on DEA Aviation Division (OA) aircraft by Vertex maintenance department personnel assigned outside of the AOC Repair Station in Fort Worth, Texas. Delegates appropriate levels of authority as necessary to ensure achievement of all contractual requirements on time and within budget. Informs and discusses aircraft and maintenance issues at off-site locations with the Aircraft Maintenance Manager, quality control and maintenance staff, and customer representatives. Ensures compliance with procedures and practices in support of the company quality management system. Supports production meetings with maintenance staff and OA management. Ensures maintenance actions performed at Vertex manned off-site locations are in accordance with specific guidance presented in aircraft or system maintenance manuals, and other technical publications. Supports efforts to compile and analyze aircraft fleet maintenance data that benefits the customer and supports the OA Safety Management System (SMS) Program. Ensures off-site Vertex maintenance activities result in minimal aircraft maintenance related delays, problems, or issues and takes steps to prevent or correct disruptions caused by personnel shortages, failure of machinery, tools, materials or schedule changes. Ensures off-site maintenance department personnel comply with all regulatory, contract, and company requirements, and training/ethics programs. Responsible for the on-going development, review, and revision of procedures and instructions pertinent to off-site maintenance operations. Recommends Program level policies, procedures, and/or contract modifications to help improve Program efficiencies. Works with the Quality Control Manager as necessary to resolve any conflicts, discrepancies, or omissions related to technical guidance for aircraft maintenance performed by Vertex maintenance personnel on OA aircraft at off-site locations. Explores opportunities for improvement and effects changes to optimize Vertex off-site maintenance operations. Establishes performance objectives or goals for all OA designated off-site maintenance locations and assesses progress towards their achievement. Hires, develops goals and objectives, monitors and evaluates performance, and writes performance reviews for direct reports. Coordinates with the Repair Station Director of Maintenance to provide qualified mechanics and technicians in support of operations, training, and aircraft maintenance and/or acceptance performed outside of the Repair Station. Ensures Vertex personnel assigned to perform aircraft maintenance at off-site locations are properly trained, certified, and comply with approved procedures, methods and practices for each maintenance activity. Ensures all off-site maintenance shop equipment and tools are serviceable and properly used. Ensures that off-site maintenance facilities are kept in a clean, FOD free, orderly manner and proper waste management is practiced. Responsible for compliance with approved supply procedures (including GSE maintenance) at all Vertex manned off-site maintenance locations. Ensures off-site maintenance personnel observe all safety precautions and properly utilize approved personal protective equipment. Responsible for establishing and monitoring non-hazardous maintenance work environments at Vertex manned off-site maintenance locations that are conducive to the safety and well being of all employees. Performs other duties as assigned. Incumbent performs other job-related tasks as assigned and required; any duties/tasks included in the employee's performance evaluation elements are essential to that employee's position within the job classification. REQUIRED EDUCATION and/or EXPERIENCE: Bachelor’s Degree plus 4 years extensive experience in aircraft and power plant maintenance and repair OR Associate’s Degree plus 8 years extensive experience in aircraft and power plant maintenance and repair OR High School diploma or Equivalent plus 12 years extensive experience in aircraft and power plant maintenance and repair, 9 of which must be in a related exempt position. Minimum of three (3) years as a Maintenance Supervisor at the level of responsibility for making airworthiness decisions is preferred. Technical institute or equivalent technical or military training preferred. Valid Airframe & Power plant certificate issued by the Federal Aviation Administration (FAA) FAA Inspection Authorization (IA) is preferred. Experience with and in-depth knowledge of a variety of fixed-wing (e.g., ATR 42, Beech 350, C-206/C-210) and rotary-wing (e.g., Bell 407 and 412, MD 500, and AS-350) aircraft. Experience in aircraft maintenance to include task qualification, certification requirements, quality control procedures, and logistics planning. KNOWLEDGES, SKILLS, ABILITIES AND OTHER CHARACTERISTICS: The following skills and abilities are required: Excellent oral and written communication skills. Effective team building and conflict resolution skills. Comprehensive knowledge of MS Office and ability to use various computerized database and software programs to develop production schedules, maintain data, and produce reports for aircraft fleet maintenance management purposes. Ability to develop and write documents such as safety rules, operating and maintenance instructions, and procedures. Ability to analyze problems and make independent decisions in accordance with approved policies and procedures to resolve them. Ability to prioritize tasks. Possess or obtain a Secret clearance from the Department of Defense. Possess and maintain a valid driver’s license. Possess or obtain a valid US Passport and obtain vaccinations required for international travel. Ability to work assigned shift or schedule, including a two hour recall response time outside of normal duty hours. Ability to travel as required to support program and customer’s mission requirements. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee works in an office type environment the majority of the time sitting, typing, using a computer terminal, conducting business on the phone. Employee is required to oversee aircraft maintenance performed in hangar and shop areas which may require employee to stand; walk, stoop, kneel, crouch, or crawl. The employee may be required to reach with hands and arms as well as push and pull items. The employee must able to lift and/or move up to 50 pounds regularly. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Normal day to day working conditions are inside an environmentally controlled office occasionally working in an aircraft hangar with good ventilation and air flow. Work may be required in outside weather conditions where employee will be exposed to all types of environmental conditions and extremes such as hot, cold, rain, wind, etc. While performing duties of this job, the employee may be exposed to moving mechanical parts, fumes or airborne particles, and risk of electrical shock. The employee is required to wear personal protective equipment including eye protection, ear protection, hand protection, respirators, masks, aprons, leather safety shoes, steel toe shoes, fall protection harness, and other equipment anytime the potential for hazards exist. The employee is occasionally exposed to high precarious places, confined spaces, toxic or caustic chemicals; risk of radiation; and vibration. The noise level in the work environment is usually moderate. Vertex Equal Opportunity Employer – minorities / females / veterans / individuals with disabilities / sexual orientation / gender identity. #MAINT Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Automated Crane / Flight Controller Technician Night Shift (6PM - 6AM) Pay Rate: $20.00 Schedule based on a 2-2-3 pattern, alternating weekends. Working Conditions: The AeroFarms facility has two areas: one is warm and humid: 80 degrees, the other is cold at 35 degrees. You are required to wear PPE provided by AeroFarms, including a facemask in the GMP/food production areas. AeroFarms offers benefits that include enrollment in 401k, Medical, Dental, and Vision Insurance, PTO, and more. AeroFarms, the commercial leader in Vertical Farming is building the largest indoor vertical farm in the world in Danville Virginia! (We already have the Guinness world record for this in 2022 – this new farm is 4 times the output of that farm!) This flagship greenfield facility will service our growing customer base in the Mid-Atlantic Region once operational in 2022. This is an opportunity to help with the scaling of one of the most exciting AgTech Companies in the world (We won #1 spot in the Global Food Tech 500 list – 3 years in a row!) https://www.youtube.com/watch?v=pPX7ZS0wqWI As AeroFarms approaches our next phase of explosive growth, we seek out creative, motivated humans who will join us in disrupting industry standards and lead the way in vertical farming, artificial intelligence, and plant biology breakthroughs to solve, and tackle global issues. If a team of 200+ intellectually curious and caring humans, expansive global operations, and our change-the-world mission resonates with you, apply today: Job Description: The Grow Room Control Technician (Flight Controller) be passionate about horticulture science and plants and will share our values around all teams conducting high quality. He/she will be an energetic, forward-thinking, and creative individual with high standards and good judgment. Also, our organization values individuals who can lead by example and keep focus in a team-centered environment. Under the direction of the Horticulture Team Leader (HTL), the Flight Controller will monitor grow room environmental and equipment-functionality variables using both software and visual/physical methods. The FC will be the “eyes in the sky” for the smooth and successful running of the growing operation and all related machinery from seeding to harvest. This includes directly operating and interfacing with equipment and troubleshooting during active production. The successful candidate will have superb attention to detail, must be an excellent communicator, and will be comfortable using computers and collecting organized data. The Flight Controller (FC) will make sure he/she will always contribute to comply with safety and quality rules on the Company, to finish tasks promptly, to be always on top of communicated priorities, to collaborate to create and keep a positive work environment, and that he/she is effectively scouting, reporting and fixing things on the towers. The Flight Controller (FC) should be able to operate with minimal supervision and always ask questions, tell the truth, and express feelings. You Will: Comply with Safety rules. Safety is everyone's responsibility. Comply with Quality rules. Collaborate and help to create and keep a positive work environment. Maintain horticulture equipment. Record and track EC, pH, temperature, and humidity. Monitor inventory of horticulture supplies. Identify and call out issues related to plant growth. Read and use grow room software as needed to verify plant condition and equipment calibration. Calibrate sensors. Call out and correct EC, pH, and irrigation issues when out of range. You Have (REQUIRED): Intermediate to advanced computer proficiency required – basic Excel. High School Diploma or equivalent. Strong communication skills. (Communication skills both verbally and in writing) Reliable attendance. Experience with food safety and HACCP protocols desired. Positive, respectful attitude. Must be detail-oriented and organized. Basic math skills. Proficient in spoken and written English. Able to operate and calibrate scales, calipers, EC/pH meter, HMI, and tablet (training provided). Able to stand and walk for long periods. Able to lift/carry items up to 35 pounds. Able to drive scissor lift and access plants 35 feet in the air after training. A high to a very high degree of concentration is required. Ability to manage multiple tasks and prioritize to ensure minimum interruption to the process. Internal candidates seeking a promotion must have completed a minimum of six months in their current role, have less than 4 attendance points, and have no corrective actions on file before becoming eligible for consideration. *Please note that AeroFarms does not work with any external staffing/recruitment vendors. Any unsolicited resumes shared with the AeroFarms team will be considered property of AeroFarms and no recruitment fees of any kind will be paid or owed unless an existing recruitment agreement exists alongside with specific engagement for the role in question. In accordance with organizational protocol, employees will at times be required to fill absences in the operation process that are equal to or lower than their positional hierarchy. Additionally, if an employee is absent, the role of the absent employee is to be completed by their immediate superior. ylSqlwDFo6