Avionics Technician Jobs

Build an Aviation Career You’re Proud Of. At StandardAero , we specialize in more than maintenance—we deliver confidence to operators of the world’s most sophisticated business aircraft. Our Augusta, GA facility has been in operation for over 50 years, and is expanding rapidly, with a 80,500 square foot expansion fueling innovation and capability across our airframe, engine, and avionics operations. We’re looking for an Avionics Technician I to join our team , where you’ll build real-world troubleshooting experience working on elite corporate aircraft from manufacturers like Dassault, Gulfstream, Bombardier, Hawker, and Embraer . This is a growth-oriented role designed for a motivated technician ready to strengthen their skills in diagnostics, communication, and hands-on repair. What You’ll Do: Troubleshoot and repair avionics systems including: Flight Management Systems (FMS) Communication and Navigation systems EGPWS/TAWS , Radar , DME , TCAS , Transponders , and Autopilot/Flight Director systems Cabin Management and In-Flight Entertainment (IFE) systems Satcom and Airborne Radio Telephone systems Perform system checks, fault isolation, and component-level replacement or repair under guidance from senior technicians or leads. Install avionics components, wiring, and systems on a variety of corporate aircraft in accordance with approved data. Use electrical hand tools, test equipment, multimeters, and soldering tools to perform accurate, efficient repairs. Maintain continuous, professional communication about work progress, timelines, and technical updates. Accurately document all work completed, discrepancies found, and actions taken—meeting FAA and company standards. Participate in on-site support and occasional travel to customer locations or other StandardAero facilities as needed. Support a safety-first, clean, and compliant work environment. Embrace learning opportunities and contribute to team goals with a proactive attitude. What You Bring: High school diploma or equivalent required. Minimum 2 years of hands-on avionics or aircraft electronics experience in aviation or military environments (fixed wing). Familiarity with troubleshooting practices, wiring diagrams, and avionics component function. Basic knowledge of FAA regulations and documentation procedures. Ability to communicate professionally with peers, supervisors, and customers. Must be authorized to work in the US without sponsorship. Preferred Qualifications: Formal technical training in avionics systems or electronics. FCC license and/or FAA A&P certificate strongly preferred. Ability to research and apply FAA guidance documents (ACs, Orders, Notices). Desire to grow into more advanced avionics troubleshooting and diagnostic roles. Prior experience in business aviation or working on aircraft from Falcon, Gulfstream, Challenger, Hawker , or Embraer families is a plus. Benefits That Help You Soar: Comprehensive Health Coverage – Medical, Dental, Vision 401(k) with 100% match up to 5% – vested immediately Paid Time Off starting your first day Quarterly Bonus Opportunities Flexible Spending Accounts – Health & Dependent Care Short & Long-Term Disability Life & AD&D Insurance Tuition Reimbursement and Ongoing Learning & Development Opportunities

RS Avionics_Elec Tech III in GAC Palm Beach Unique Skills: See job description for details. Must be able to pass a Palm Beach Airport Authority background check. Education and Experience Requirements High School Diploma or GED required. 5 years experience in an avionics/electrical career field. 2 years of accredited schooling in aviation electronics may offset two years of experience requirement. A & P license, FCC license or NCATT certification preferred. Position Purpose: Provides technical expertise while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and y defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Job Description Principle Duties and Responsibilities: Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting . Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system . Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems . Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring . Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability . Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time . Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations . Adapts to sudden schedule changes . Coordinates with other disciplines concerning projects . Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system . Self inspection capability for all avionics testing functions in applicable areas . In support of acft certification and final phase testing, may include flight tests on acft as required. . Perform other duties as assigned. Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 226946 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 07/31/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Build an Aviation Career You’re Proud Of. At StandardAero , we're not just maintaining aircraft—we're powering missions, enabling business, and shaping the future of Business Aviation. At our Augusta, GA MRO facility, we’re proud to support a broad range of premier corporate aircraft including Falcon, Challenger, Gulfstream, Hawker, Embraer, and Learjet models . As we continue expanding our world-class operation—with a 80,500 square foot expansion nearing completion—there’s never been a better time to join our team. We are currently seeking an experienced Avionics Technician to support the Service side of our Airframe Operations. In this hands-on role, you’ll perform advanced troubleshooting, diagnostic, and repair work on complex avionics systems—keeping aircraft flight-ready and our clients confident in every mission. What You’ll Do: Diagnose and troubleshoot complex avionics system issues, including communication, navigation, surveillance, cabin management, and flight control systems. Interpret and follow technical drawings, wiring diagrams, schematics, and STC instructions to isolate faults and determine corrective actions. Perform on-aircraft troubleshooting, functional checks, and system-level testing on corporate aircraft avionics and electrical systems. Collaborate with Engineering, Planning, and other departments to resolve unique system discrepancies or modification challenges. Repair or replace defective wiring, components, LRUs, connectors, or antennas to restore full operational capability. Utilize OEM manuals, IPCs, AMMs, and FAA guidance to ensure repairs and alterations are in full regulatory compliance. Assist with ramp service troubleshooting events and support AOG response efforts as needed. Complete all required documentation in accordance with FAA regulations and StandardAero’s quality standards. Ensure strict adherence to safety, cleanliness, and FOD prevention practices on the hangar floor. Basic Qualifications: High school diploma or equivalent required. 3+ years of hands-on Avionics experience —with a strong focus on troubleshooting and service/repair (not just installation). In-depth knowledge of both electrical and electronic principles , and the ability to interpret complex schematics and system layouts. Working knowledge of bonding and grounding techniques , continuity testing, and aircraft power systems. Must be authorized to work in the United States, without sponsorship. Preferred Qualifications: FCC License and/or FAA A&P Certificate strongly preferred. Experience troubleshooting avionics systems on Falcon, Challenger, Gulfstream, Hawker, Embraer , or other corporate/business aircraft platforms. Familiarity with cabin connectivity systems and avionics products such as Starlink, GoGo, SmartSky, Rockwell Collins, or Honeywell . Prior exposure to maintenance tracking programs, STC packages, and engineering documentation is a plus. Benefits That Take You Higher: Relocation & Sign-On Bonus Eligible Comprehensive Health Insurance (Medical, Dental, Vision) 401(k) with 5% company match – vested on day one Paid Time Off starting immediately Quarterly Bonus Opportunities Short & Long-Term Disability + Life & AD&D Insurance Access to tuition reimbursement and career development programs

The Avionics Technician installs, inspects, tests, adjusts, or repairs avionics equipment, such as radar, communications, navigation, and missile control systems in assigned aircraft. Performs tasks independently with little or no supervision. Job Duties & Responsibilities: Performs operational checks, bench checks, troubleshoots, and isolates malfunctions in complex aircraft avionics equipment. Uses complex test equipment such as continuous wave and pulse generators, time domain reflectometers, multi-trace oscilloscopes, frequency counters, multi-meters and deviation meters, and specialized test equipment to perform operational checks. Repairs or replaces components based on test results following blueprints, schematics, handbooks, and other technical documents. Performs calibration, repair and replacement of system components based on test results following blueprints, schematics, handbooks, and other technical documents. Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. Annotates maintenance actions in aircraft records and is knowledgeable in CAMS documentation. Comply with all current sections of COMNAVAIRFORINST 4790.2 series applicable to aircraft maintenance. Working knowledge of technical publications, NAMP and NALCOMIS aircraft maintenance applications. Must be capable and willing to execute standard aircraft maintenance tasks as part of daily operations. Other or Additional Responsibilities: Perform other job-related duties as may be assigned. Knowledge & Skills: In-depth knowledge of advanced electronic principles and circuit analysis. Ability to trace signal flow, understand interrelationships of circuits, interpret waveforms and voltages. Working knowledge of aircraft communications/navigation and instrument systems. Ability to interpret schematic diagrams, engineering drawings and charts of assigned systems. Excellent soldering and harness/wiring skills, PC board, surface mount and crimping experience. Working knowledge of all standard test equipment and maintenance procedures. Working knowledge of technical orders and maintenance forms. Possess a valid US State driver's license. Ability to read and interpret data is required. Ability to read, write, speak, and understand English. Ability to obtain a government flight line driver’s license. Ability to obtain a secret security clearance. Experience & Education: High School degree or equivalent required. Completion of specialized courses in aircraft avionics for the F/A-18 aircraft. Minimum of two (2) to four (4) years recent experience in the repair of aircraft avionics, com/nav, or instrument systems of the F/A-18 aircraft. Physical Requirements / Working Environment: May work in Aircraft maintenance hangar or outside. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure. May be exposed to extreme noise from turbine and jet engine aircraft. May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft. Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp, or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift up to 50 pounds. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to see imperfections, micrometer readings and other small scales. Must be able to communicate by voice and detect sound by ear. Must be able to distinguish color and judge three-dimensional depth. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Travel: May vary by location What We Bring: At V2X we strive to be market competitive in our total reward offerings. The successful candidate’s starting pay will be based on, but not limited to, their job-related skills, experience, qualifications, work location, and market conditions. The salary range provided is intended to display the value of the company’s base pay compensation for locations in the state of Maryland and may be modified at the discretion of the company. Maryland Salary Range: USD $45.39 Union Flex Benefit Credit: USD $3.00/HR Opt-Out Health Credit (must have your own coverage): USD $3.15/HR Other Compensation elements offered: Overtime Premium Pay Differential Pay Please speak with a recruiter for additional information. Employee benefits include the following: Healthcare coverage Life insurance, AD&D, and disability benefits Retirement plan Wellness programs Paid time off, including holidays and leave of absences Eligible Tuition Reimbursement Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. #LI-MR1 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

RS Avionics_Elec Tech II in GAC Savannah Unique Skills: This position is posted for all Savannah service centers and candidate must be able to work any shift. Education and Experience Requirements High School Diploma or GED required. Four (4) years experience in an avionics/electrical career field. or two (2) years of accredited schooling in aviation electronics and two (2) years related experience. A&P (FAA Airframe and Powerplant) license preferred. Other FCC preferred. Other NCATT preferred. Position Purpose: Provides technical expertise in testing aircraft systems, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. May fill in for the Senior Avionics/Electrical Technician thus ensuring that the company goals of safety and quality are enforced at all times while adhering to daily work plans to maintain schedule requirements. Job Description Principle Duties and Responsibilities: Essential Functions: Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Adapt to sudden schedule changes. Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. . Perform other duties as assigned. Other Requirements: Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret basic blueprints and schematic diagrams. Demonstrates excellent communication skills. Must be able to communicate effectively both verbally and written. Must be able to climb stairs and ladders, work in confined areas and lift up to 50 pounds. Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 226142 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 07/31/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

The Avionics Technician installs, inspects, tests, adjusts, or repairs avionics equipment, such as radar, communications, navigation, and missile control systems in assigned aircraft. Performs tasks independently with little or no supervision. Job Duties & Responsibilities: Performs operational checks, bench checks, troubleshoots, and isolates malfunctions in complex aircraft avionics equipment. Uses complex test equipment such as continuous wave and pulse generators, time domain reflectometers, multi-trace oscilloscopes, frequency counters, multi-meters and deviation meters, and specialized test equipment to perform operational checks. Repairs or replaces components based on test results following blueprints, schematics, handbooks, and other technical documents. Performs calibration, repair and replacement of system components based on test results following blueprints, schematics, handbooks, and other technical documents. Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. Annotates maintenance actions in aircraft records and is knowledgeable in CAMS documentation. Comply with all current sections of COMNAVAIRFORINST 4790.2 series applicable to aircraft maintenance. Working knowledge of technical publications, NAMP and NALCOMIS aircraft maintenance applications. Must be capable and willing to execute standard aircraft maintenance tasks as part of daily operations. Other or Additional Responsibilities: Perform other job-related duties as may be assigned. Knowledge & Skills: In-depth knowledge of advanced electronic principles and circuit analysis. Ability to trace signal flow, understand interrelationships of circuits, interpret waveforms and voltages. Working knowledge of aircraft communications/navigation and instrument systems. Ability to interpret schematic diagrams, engineering drawings and charts of assigned systems. Excellent soldering and harness/wiring skills, PC board, surface mount and crimping experience. Working knowledge of all standard test equipment and maintenance procedures. Working knowledge of technical orders and maintenance forms. Possess a valid US State driver's license. Ability to read and interpret data is required. Ability to read, write, speak, and understand English. Ability to obtain a government flight line driver’s license. Ability to obtain a secret security clearance. Experience & Education: High School degree or equivalent required. Completion of specialized courses in aircraft structural repair is required. Two (2) to Four (4) years recent experience in the repair of aircraft avionics, com/nav, or instrument systems of the E-2C/D aircraft. Four (4) years preferred. Physical Requirements / Working Environment: May work in Aircraft maintenance hangar or outside. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure. May be exposed to extreme noise from turbine and jet engine aircraft. May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft. Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp, or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift up to 50 pounds. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to see imperfections, micrometer readings and other small scales. Must be able to communicate by voice and detect sound by ear. Must be able to distinguish color and judge three-dimensional depth. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Travel: May vary by location What We Bring: At V2X we strive to be market competitive in our total reward offerings. The successful candidate’s starting pay will be based on, but not limited to, their job-related skills, experience, qualifications, work location, and market conditions. The salary range provided is intended to display the value of the company’s base pay compensation for locations in the state of Maryland and may be modified at the discretion of the company. Maryland Salary Range: USD $45.39 Union Flex Benefit Credit: USD $3.00/HR Opt-Out Health Credit (must have your own coverage): USD $3.15/HR Other Compensation elements offered: Overtime Premium Pay Differential Pay Provided salary range minimum and maximum values correspond to variances between regional/geographic locations across the United States. Please speak with a recruiter for additional information. Employee benefits include the following: Healthcare coverage Life insurance, AD&D, and disability benefits Retirement plan Wellness programs Paid time off, including holidays and leave of absences Eligible Tuition Reimbursement Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. #LI-MR1 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

RS Avionics_Elec Tech I in GAC Savannah Unique Skills: This position is posted for all Savannah service centers and candidate must be able to work any shift. Education and Experience Requirements High School Diploma or GED required. 2 years related work experience; or two (2) years of accredited schooling in aviation electronics. Ability to read and interpret basic blueprints and schematic diagrams. . Position Purpose: Assists in troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise by implementing process changes to reduce cost and meet schedule without compromising safety or quality. Job Description Principle Duties and Responsibilities: Essential Functions: Demonstrates basic technical skills in avionics and aircraft systems operational testing and troubleshooting. Under supervision, performs the installation and functional testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Assists in ensuring quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. Acquires and demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Performs and complies with engineering changes and modifications as required. Assists in set up and operation of necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. Under supervision, ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. Tests and maintains test equipment, electronic systems, and components. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. Additional Functions: In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. . Perform other duties as assigned. Additional Information Requisition Number: 226141 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 07/31/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2024 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

*Overview* We are seeking an experienced Avionics Technician to join our team in ensuring the reliability and safety of aircraft electronic systems. The ideal candidate will possess a strong understanding of avionics systems and components, along with the ability to work effectively in a fast-paced environment. This role requires meticulous attention to detail and adherence to Federal Aviation Regulations, ensuring all work meets industry and Government standards. *Duties* * Perform installation, maintenance, and repair of avionics systems and components on various helicopters. * Utilize hand tools and power tools for fabrication and assembly tasks. * Conduct thorough inspections of avionics equipment to identify issues or malfunctions. * Interpret schematics and technical manuals to troubleshoot electrical systems. * Collaborate with engineering teams for design modifications and system upgrades. * Ensure compliance with Federal Aviation Regulations during all maintenance activities. * Document all work performed accurately, maintaining records for quality assurance. *Experience* * Proven experience as an Avionics Technician or in a similar role within the aviation industry or United States military. * Familiarity with electrical systems, including wiring, soldering, and circuit analysis. * Proficient in using meters and other precision measuring tools for accurate assessments. * Ability to militarise avionics systems as required by specific project needs. * Strong problem-solving skills and ability to work independently or as part of a team. If you are passionate about aviation technology and meet the qualifications outlined above, we encourage you to apply for this exciting opportunity. Job Type: Full-time Pay: $20.00 - $25.00 per hour Expected hours: 40 per week Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Life insurance * Paid time off * Retirement plan * Vision insurance Schedule: * 8 hour shift People with a criminal record are encouraged to apply Experience: * Aviation: 4 years (Required) Ability to Relocate: * Peachtree City, GA 30269: Relocate before starting work (Required) Work Location: In person

Flexjet is seeking Avionics Technicians to work at our CLE location. A&P preferred but not required. We offer industry leading compensation, benefits and room for growth. Responsibilities: Troubleshoots, repairs, modifies and calibrates aircraft electronic systems and components Certifies integrated avionic systems and components at intermediate levels utilizing shop avionics support equipment and specialized precision measuring equipment Analyzes malfunctions and calibrates and performs maintenance on avionics support equipment using calibration standards Installs, aligns and wires electrical and electronic components such as sensors, radio communications, antennas and lights Performs continuity checks and functional checkouts of complete aircraft systems Process Inspection forms and sign name, as technician, after their work is completed Notify proper authority of any suspected unairworthy conditions found during the performance of their duties Sets up and operates necessary test equipment conducts functional and operational tests to evaluate performance and reliability Demonstrates excellent communication skills, professionalism, and a positive customer service attitude without compromising quality Presents a clean and neat work area to customers – facility cleanliness and general housekeeping Performs other duties as required Requirements: High School diploma or equivalent 4 years of related corporate avionics experience Must be highly proficient in both troubleshooting/service and installation sides of the role Advanced certification in avionics preferred Must be flexible with shift work Must be able to stand, sit, and bend for extended periods of time Must be able to lift up to 30 pounds. Valid Drivers License Proficiency in Microsoft Office Suite

*Duties:* * We are seeking an Avionics Tech with experience in the removal, installation, troubleshooting and testing of all types of Avionics systems. * Avionics Technicians will be performing testing, troubleshooting and repair on various avionics systems on primarily GA aircraft. *Required Experience:* * 4 years recent avionics experience. * Wire repair knowledge * Multimeter/Megohmmeter, Pitot/Static test equipment, Transponder test equipment. * Reading schematics, and building wire harnesses in accordance with schematics. * Building Coax cables. * Soldering switches, pins, posts, etc. *Preferred* *Experience*: · Garmin installation and troubleshooting experience. · Previously held Repairman’s certification, A&P license, VII level (military), or CDQAR (military). · GA and Corporate aircraft experience · FLIR experience. *Essential Job Functions:* * Repair and maintain communication, navigation, GPS, FMS, WX Radar and other avionics related systems. * Perform troubleshooting of all systems installed on the aircraft. * Remove existing avionics and install new avionics components and systems, including planning, engineering, installation, configuration and final testing. * Perform all aircraft maintenance in accordance with applicable technical data and FAA regulations. * Accurately document all work performed. * Comply with all health and safety policies and procedures. * Perform other tasks assigned. * Some occasional travel may be required. Job Type: Full-time Pay: $20.00 - $35.00 per hour Expected hours: 40 per week Benefits: * 401(k) matching * Dental insurance * Employee assistance program * Health insurance * Paid sick time * Paid time off * Retirement plan * Vision insurance Schedule: * 8 hour shift * Monday to Friday * Overtime Work Location: In person

1. Demonstrates technical skills and expertise in avionics and aircraft systems operational testing and troubleshooting. 2. Performs the installation and functionally testing of electrical/avionics components and systems on aircraft per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. 3. Ensures quality and efficiency of all installations. Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. 4. Demonstrates the skills and knowledge required. to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering, and pinning of wiring. 5. Performs and complies with engineering changes and modifications as required. 6. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. 7. Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. 8. Tests and maintains test equipment, electronic systems, and components. 9. Complies with the company FOD program, tool control program, 5-S program, and all safety regulations. Job Type: Full-time Pay: Up to $36.00 per hour Benefits: * 401(k) matching * Health insurance * Paid time off * Relocation assistance Work Location: In person

We're looking for detail-oriented *Avionics Technicians* who are passionate about electronics, diagnostics, and hands-on repairs. If you enjoy working with complex systems and want to be part of a high-performing team in the aerospace industry, we’d love to meet you. *Why You’ll Love This Role* You'll be part of a company that values skill, precision, and innovation. This role is ideal for individuals who thrive on solving electrical challenges and working on cutting-edge avionics technology. *What You’ll Do* * Install, test, troubleshoot, and maintain avionics systems, including communication, navigation, and flight control systems * Use diagnostic tools (like multimeters) to identify and resolve electronic issues * Read and interpret technical drawings, schematics, and wiring diagrams * Perform hands-on repairs—including soldering and component rebuilds * Ensure compliance with FAA regulations and quality standards * Document all maintenance, repair, and inspection work * Collaborate with a supportive team and contribute to continuous improvement * Lift and maneuver equipment as needed (some physical work involved) *What We’re Looking For* * Experience as an Avionics Technician or in a related electronics repair field * Comfort with soldering and using electrical testing tools * Familiarity with schematics, wiring diagrams, symbols, and production illustrations * Strong attention to detail and ability to work independently * Team-oriented with good communication skills * Able to handle physically demanding tasks and occasional heavy lifting *Preferred but Not Required* * Previous experience in aerospace MRO or aviation manufacturing * FAA certifications or training in avionics repair *Benefits & Perks* * Competitive hourly pay based on experience * Opportunities for growth within a fast-growing aerospace company * On-the-job training and cross-functional learning * Supportive work environment and collaborative culture Job Type: Full-time Pay: From $20.00 per hour Expected hours: 40 per week Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Health savings account * Life insurance * Paid time off * Vision insurance Schedule: * 8 hour shift * Day shift * Monday to Friday * No weekends Work Location: In person

Directs, coordinates, and monitors all maintenance actions required to support VX-31 FA-18 Avionics Work Center operations in accordance with CNAFINST 4790.2 series and associated government and Company instructions. Applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as Maintenance Instruction Manuals (MlM’s), technical directives, and associated data packages. Essential Job Functions: Directs, coordinates, and monitors all scheduled and unscheduled maintenance to support VX-31 FA-18 Avionics Work Center operations. Makes work assignments, tracks completion of assigned tasks, provides status updates and feedback to supervisory personnel, performs spot monitoring and corrections as needed for all FA-18 Avionics Work Center functions and associated operations. Reports any maintenance or disciplinary infractions to supervisory personnel. Investigates accidents. incidents or infractions to discover root cause and recommend corrective actions including disciplinary actions to supervisory personnel. Ensures assigned personnel participate in FOD walkdowns, safety drills, training events and other scheduled events as directed by Must be a technically qualified, experienced, and knowledgeable individual who can exercise an appropriate level of responsibility in the FA-18 Avionics area. Provides technical support to electronic project engineers, shall utilize excellent organizational skills in prioritizing workload to meet daily flight schedule. Provides technical guidance and expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Minimum Education and Experience Required: * Military VMET or JST MUST be included with application to be considered (if prior military)* Candidate experience must be clearly defined on resumes by listing specific dates (month & year) and locations of relevant experience. Minimum ten years USN/USMC/USCG Organizational Level Avionics/Electrical experience. Minimum five years Organizational Level Avionics/Electrical experience on F/A-18 aircraft (24 of the 36 months within last 3 years preferred). Must have completed the Navy Class C school for Avionics and/or Electrical Instruments on the FA-18 (60 months F/A-18 Avionics/Electrical Organizational Level experience may be substituted for C-School). Must have been FA-18 Avionics/Electrical Work Center CDl qualified. Must have experience as a Work Center Supervisor. Experience as FA-18 Plane Captain, QAR, CDQAR, Flight Deck Coordinator strongly desired. High School graduate or equivale Must have a valid driver's license. Must have a current US secret level clearance and be able to maintain it. Must be available to work any shift. Travel may be required. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Education Preferred High School or better Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

RS Avionics_Elec Tech IV in GAC Palm Beach Unique Skills: See job description for details. Must be able to pass a Palm Beach Airport Authority background check. Education and Experience Requirements High School Diploma or GED required. Six (6) years experience in an avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and four (4) years related experience. A & P license, FCC license or NCATT certification preferred. Position Purpose: Provides leadership, technical expertise and guidance while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Demonstrates the knowledge and leadership skills required. to fill in for the team leader thus ensuring that the company goals of Safety and Quality are enforced all times while adhering to daily work plans to maintain schedule requirements. Job Description Principle Duties and Responsibilities: Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting. Provides direct training to personnel to support company cross-training goals while ensuring a safety conscience, quality oriented, skilled workforce. Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems. Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring. Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability. Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time. Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Adapts to sudden schedule changes. Coordinates with other disciplines concerning projects. Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system. . Self inspection capability for all avionics testing functions in applicable areas. . In support of acft certification and final phase testing, may include flight tests on acft as required. . Perform other duties as assigned. Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 226945 Category: Service Center Percentage of Travel: Up to 25% Shift: Second Employment Type: Full-time Posting End Date: 08/01/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Chicago, Illinois Maintenance 15472 7/7/2025 Job Description About SkyWest Looking for the next step in your Aircraft Maintenance career? As a SkyWest A&P Mechanic in MKE, you will be a part of a fast-paced environment full of variety that puts your talent to work on our growing fleet of aircraft. Plus, you will qualify for a $10,000 bonus with a commitment to work in MKE for at least three years. Those with military A&P experience are also eligible for an additional $7,500 bonus. This rewarding opportunity will help you gain new skills as you work nose-to-tail on our aircraft, belong to a world-class family of fellow mechanics, and have a crucial impact on the entire SkyWest operation. Primary Job Duties Must be able to effectively troubleshoot all aircraft systems In a timely manner, will be responsible for making critical decisions regarding aircraft safety Will be responsible for proficiency in all documentation and paperwork, including parts paperwork In a hangar environment, a technician will be performing avionics inspections, routine maintenance (e.g., FOQA downloads) and troubleshooting systems In shop environment, a technician will be performing testing, troubleshooting and completing repairs on components. May also be required to work on aircraft systems Other duties as assigned Minimum Requirements MUST HOLD AN A&P certificate Must be familiar with and be able to read and understand company, manufacturer, and wire diagram manuals to include schematics Must possess basic avionics skills Work history of being a self-starter, working well in a team environment, ability to effectively use aircraft manuals to troubleshoot and repair aircraft avionics and electrical systems Possess a valid unrestricted driver’s license, and be insurable Must have a minimum toolbox Problem solving and organizational skills are required Willing to work nights and holidays Exercise good judgment in working with people in a team environment as well as in aircraft maintenance and safety Physical and Other Requirements Able to comfortably lift 60 lbs. routinely with or without a reasonable accommodation Experience/Training must meet one of the following: Graduated from an accredited avionics school Military training in avionics or electronics Associate degree or higher in electronics Eighteen months experience in the avionics industry A&P certification with previous avionics experience This is a Department of Transportation safety-sensitive position Must hold a FCC GROL license. If a FCC GROL license is not held at time of employment it must be obtained within six months from hire date. Please complete the online application. Qualified applicants will be contacted. This position will require the selected candidate to travel outside the station for training - in addition to the completion of their new hire onboarding. This job posting may have an additional video/phone interview requirement. Please monitor your email and junk folder for additional instructions.

*Avionics Technician – High-Priority Defense Program* *Dayton, Ohio* | $*40.00/hr + Per Diem Split (if eligible)* | *Contract-to-Hire or Long-Term Contract* *Join the Mission. Build the Future of National Defense.* Take your avionics career to the next level by joining the launch team of a *brand-new, multi-billion dollar Department of Defense program*. This is a *10-year project* modernizing advanced airborne defense platforms, starting with heavily modified *Boeing 747s*. Be one of the *first 5 avionics techs* hired and work inside *state-of-the-art, climate-controlled hangars* in *Dayton, Ohio*. *Your Responsibilities:* * Perform *avionics modifications and installations* on commercial aircraft. * Terminate, crimp, and connect wires to exacting military and aerospace standards. * Conduct *operational checks*, troubleshooting, and *ring-outs* of avionics systems. * Read and interpret *electrical schematics*, wiring diagrams, and modification drawings. * Support test, inspection, and integration phases in a classified environment. *What You Bring:* * *3+ years of experience* in aircraft avionics installation, wiring, and troubleshooting. * Proficiency with tools for wire prep, crimping, routing, and testing. * Ability to read wiring diagrams, pinouts, and modification packages. * Must bring your own tools (shadowed and etched preferred). * FAA Drug Test compliance required. * *Eligible to obtain a U.S. Secret Security Clearance* (active clearance a plus). * Military or special mission aircraft background is a plus—*veterans encouraged to apply*. *Why This Role Is Special:* * Be one of the *first avionics techs* on a massive U.S. defense aviation program. * Work inside *new, climate-controlled hangars* with top-of-the-line infrastructure. * Stable, long-term project with *career advancement and training opportunities*. * Mission-driven, *veteran-friendly environment* with strong team culture. * Clear path to *contract-to-hire* and promotion as the program expands. *Job Type & Location:* * *Location:* Dayton, Ohio * *Schedule:* Full-time | Flexible shifts | Overtime regularly available * *Type:* Long-term Contract or Contract-to-Hire *Pay and Benefits:* * *$40.00/hr + Per Diem Split (if eligible)* * Weekly pay * Benefits available (eligibility may vary): * Medical, Dental, and Vision Insurance * 401(k) with pre-tax and Roth options. * 8 paid holidays. *Workplace Type:* *100% Onsite* | Brand-new, *climate-controlled hangars* *Be a part of something historic.* This is more than just avionics work—it’s a chance to help shape the future of defense aviation. *Apply now to claim one of the first slots on this elite program.* Job Types: Full-time, Contract Pay: $40.00 per hour Benefits: * 401(k) * Dental insurance * Health insurance * Vision insurance Schedule: * 8 hour shift * Monday to Friday Work Location: In person

*About Baker Aircraft:* We are a growing Fixed and Rotor wing part 135 charter company that has a variety of aircraft on fire and Fish and Game contracts in the Northwest. Opportunities to move up in the company. *Benefits* Relocation Expense Reimbursement, Paid Training, Robinson Helicopter Factory Training Provided, Paid Holidays, Paid Vacation, Paid Sick Leave, Paid Medical Insurance, Per Diem, Mileage Reimbursement, Direct Deposit, Hourly Rate, Employee discounts on flight training. *Job Responsibilities:* We are seeking an experienced *Avionics Technician* with a strong background in testing and troubleshooting complex aircraft electrical systems. The ideal candidate will have at least 5 years of hands-on experience with avionics equipment, including the use of specialized tools to test *transponders, pitot-static systems, and antennas*. This position requires a high level of technical expertise, attention to detail, and the ability to work independently as well as part of a team. In addition to testing and troubleshooting, the Avionics Technician will also be expected to *perform routine and non-routine maintenance work*, ensuring all avionics systems are operating safely and efficiently in compliance with regulatory standards. Minimum of 5 years of hands-on experience in avionics maintenance and troubleshooting preferred. Proficient in the use of avionics test equipment. Strong understanding of aircraft electrical systems and troubleshooting techniques. FAA Repairman Certificate or A&P License preferred, but not required. Excellent problem-solving skills and attention to detail. Strong communication skills and the ability to work in a fast-paced environment. Our fleet consist of a Bell 206 L1 with the C30P engine a UH-1H with composite blades with a 703 engine and 2 Robinson R-44’s and 2 Bell 407HP's. We also operate 2 Commander 690s, a Cessna 206, Cessna 182, and a Cessna 172. Excellent location in the Northwest for Hunting Fishing and outdoor activities, in the heart of Eastern Oregon near beautiful Baker City. Pay negotiable depends on experience. *Qualifications:* A&P License preferred Must have your own set of tools and box. 5 years experience preferred. Job Type: Full-time Pay: $30.00 - $50.00 per hour Benefits: * Flexible schedule * Health insurance * On-the-job training * Paid sick time * Paid time off * Relocation assistance Schedule: * 8 hour shift Work Location: In person

Responsibilities: Troubleshoots, repairs, modifies and calibrates aircraft electronic systems and components Certifies integrated avionic systems and components at intermediate levels utilizing shop avionics support equipment and specialized precision measuring equipment Analyzes malfunctions and calibrates and performs maintenance on avionics support equipment using calibration standards Installs, aligns and wires electrical and electronic components such as sensors, radio communications, antennas and lights Performs continuity checks and functional checkouts of complete aircraft systems Process Inspection forms and sign name, as technician, after their work is completed Notify proper authority of any suspected unairworthy conditions found during the performance of their duties Sets up and operates necessary test equipment: conducts functional and operational tests to evaluate performance and reliability Demonstrates excellent communication skills, professionalism, and a positive customer service attitude without compromising quality Presents a clean and neat work area to customers – facility cleanliness and general housekeeping Performs other duties as required Requirements: High School diploma or equivalent 4 years of related corporate avionics experience Must be highly proficient in both troubleshooting/service and installation sides of the role Advanced certification in avionics preferred Must be flexible with shift work Must be able to stand, sit, and bend for extended periods of time Must be able to lift up to 30 pounds. Valid Drivers License Proficiency in Microsoft Office Suite

Elliott Aviation, a leader in aircraft solutions, has an exciting opportunity for an Senior Avionics Technician at their location in Des Moines, IA. Since 1936, Elliott Aviation has been a world-class provider of comprehensive and customer-focused solutions for business aviation. Our vision, building partnerships that last, applies to our employees as well as our customers. This position assists with installation, troubleshooting and repairing, and other general tasks related to the maintenance, installations and repair of Avionics systems and components on a variety of aircraft product models. Responsibilities of this position include: Troubleshoots and repairs all avionics equipment and electrical systems on aircraft Communicates with department manager or crew chief on any problems or repairs Ensure all work performed is inspected by an authorized repair station inspector Prepares various documents for record keeping purposes as required by company policies, FAA approved repair station and quality control manuals, all FAA regulations, OEM aircraft manufacturer manuals, etc. Learns, understands and follows the company work order and parts requisition process as written. Maintains a clean, neat, and efficient work area Repairs and calibrates shop equipment as assigned Top candidates will possess: Willingness to work on a team with both experienced technicians and mentor junior technicians with a calm demeanor Ability to communicate well in straightforward situations Organizational skills and attention to detail Ability to maintain a safe and clean work environment Ability to analyze and interpret professional journals, technical procedures, or governmental regulations Ability to write reports, business correspondence, or procedural manuals Excellent mechanical aptitude and a desire to work Other requirements include: Experience working on and troubleshooting aircraft avionics and airframe systems Thorough knowledge and understanding of FARs 43, 91, 135, 145. Experience working with and repairing the following aircraft systems: Autopilots, Flight Management Systems, Navigation and Communication Systems, EFIS, Aircraft Electrical Systems, Lighting, Pitot and Static Systems Any bench repair capabilities preferred A&P License / FCC License a plus Salary & Benefits Wage Scale: The wage scale for this position ranges from $22.00 to $44.00 per hour, based on experience, qualifications and performance. Specific compensation for this role will be determined by several factors including but not limited to; minimum and preferred qualifications, knowledge, skills, abilities, education, experience and location. General Benefits: Elliott Aviation takes pride in offering a competitive and comprehensive benefit package to its employees to ensure our team is well cared for. Benefits begin day 1 of employment! Sign-On Bonus and relocation bonus potential Health, Dental and Vision Insurance- Significant contributions are made by Elliott Aviation as part of our commitment to providing a comprehensive benefit program. You can earn lower rates through our wellness program as well. RXnGo Pharmacy benefit – Generic prescription coverage at zero cost to the employee Time Off – You will receive 8 paid holidays and paid earned time off. Relocation assistance provided for most of our positions 401(k) – Elliott offers a company match program for your retirement savings Company Sponsored short-time and long-term disability as well as life insurance Employee Assistance Program (EAP) – Confidential consultation and resources services 24/7 Training and Education- On average, Elliott Aviation invests upwards of $3,000 per team member on development of technical skills as well as soft and leadership skills

_*Military Veterans Are Highly Encouraged to Apply!*_ _*Job Summary:*_ With advanced knowledge and high level skills, installs, repairs, troubleshoots and performs other general tasks related to the maintenance, installation and repair of avionics systems and components on a variety of airframes in a safe and clean work environment according to manufacturer’s specifications, company-approved procedures, and customer specifications. Avionics Wiring Tech III must be capable, and experienced to perform effective installation and troubleshooting of the most complicated avionics system installations. Trains less experienced employees through the OJT process. Prepares and completes appropriate documentation. Meets the requirements for designation as a Production Inspector. _*Essential Duties and Responsibilities:*_ * Performs installations, troubleshooting, and repairs of the most complicated nature on aircraft avionics systems and components on a variety of airframes in a timely, clean, safe and professional manner with no rework, with a superior level of quality, craftsmanship, and efficiency. * Makes sound technical decisions as a technician and when functioning as Production Inspector. Efficiently and effectively installs, troubleshoots, function tests, and repairs the most complicated aircraft avionics systems across a variety of aircraft makes and models. * Expertly prepares various documents for record keeping purposes, as required by Company policies, FAA Approved Repair Station and Quality Control Manuals, All FAA regulations (FARs), OEM Aircraft Manufacturer Manuals, etc. to include turnovers, and personal training logs. Assists Junior Avionics Wiring Technicians in these efforts. * Demonstrates proficiency of work order system by completing accurate and timely discrepancies and corrective action statements. Assists Junior Avionics Wiring Technicians in these efforts. * Willingly and effectively shares knowledge and capabilities with less experienced technicians through OJT to foster their development, ensure accurate work, and support of the team’s goals. Acts as mentor and task expert for new avionics personnel. * Proficiently and consistently locates and uses the appropriate technical data to accomplish any and all tasks. * Supports, maintains, and complies with all Environmental, Health and Safety federal, OSHA, state and local regulations _*Requirements:*_ * *3+ years of avionics installation/modification experience on *_*\*\*\*Corporate/Business Jet\*\*\* *_*aircraft Required.* * Thorough knowledge and understanding of FARs 43, 91, 135, 145. * Visual acuity correctable to 20/20 * Airframe & Power plant Certificate and/or FCC License preferred. * High school graduate or equivalency degree * Eligibility for designation as a Production Inspector * Ability to attain & retain AOA badge or Airport requirements * Must be willing to manage a team with both experienced technicians and mentor junior technicians with a calm demeanor. * Willingness to learn by taking guidance from others. * Ability to communicate well in straight-forward situations * Organizational skills and attention to detail * Ability to maintain a safe and clean work environment * Must possess excellent mechanical aptitude and a desire to work * Routinely lifts up to 10 lbs, occasionally lifts up to 50 lbs * Stands for long periods of time, with frequent bending, squatting, kneeling and stooping * Uses hands to reach and feel, with repetitive motion; Good finger dexterity * Reads, writes, speaks and understands English fluently * Works in confined spaces, extreme temperatures, heights above six feet, noisy environments and flying * Works with and around products and materials associated with aircraft maintenance * Must possess minimum tooling required to perform duties assigned Job Types: Full-time, Contract Pay: $30.00 - $44.00 per hour Expected hours: 40 per week Benefits: * Dental insurance * Health insurance * Paid time off * Referral program * Relocation assistance * Vision insurance Schedule: * 8 hour shift * Day shift * Night shift * Overtime Work Location: In person

Date Posted: 2025-07-02 Country: United States of America Location: HMN01: S&IS (Sensors) - Burnsville 14300 Judicial Rd, Burnsville, MN, 55306 USA Position Role Type: Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of “U.S. Person” go here. https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/subpart-C/section-120.62 Security Clearance: None/Not Required The Avionics Repair Technician is responsible for assessing, repairing, testing and documenting repair material in an FAA regulated environment. They will participate in high-level technical work with little or no instruction. WHAT YOU WILL DO: Utilize limited variety of microelectronic, electronic, optical, electro-optical, mechanical, or electromechanical equipment, including computers and lasers. Follow written procedures and demonstrate proper use of hand tools and measuring devices. Follow blueprints, guidelines, and/or diagrams to ensure product specifications and tolerance levels are met. Troubleshooting and testing of repair units. Use electronic test and troubleshooting equipment. Utilizes SAP and other MRO computer programs. Participate on project teams. Apply technical expertise in the evaluation, development, maintenance and use of complex products, devices, tests, or procedures under constantly changing conditions where ingenuity and judgments are required. Must be highly-motivated and dedicated to exceeding customer expectations. Relies on extensive experience and judgment to plan and accomplish goals. Utilize analytical skills and problem-solving abilities. Successfully work in a team to support work capacity in a fast-paced environment. Conduct written and verbal communication with technicians, engineering, and leadership within the MRO. Responsible for moderate level of planning. QUALIFICATIONS YOU MUST HAVE: Typically requires a HS Diploma with a minimum of 1 year of relevant experience. U.S. Person (U.S. citizen, permanent resident, or granted refugee or asylee status) as defined here: https://www.ecfr.gov/current/title-22/chapter-I/subchapter-M/part-120/subpart-C/section-120.6 Must have an electronics background with 2+ years complimentary work history in a manufacturing or service environment. This position is considered safety sensitive in accordance with FAA guidelines. Candidate will be subject to drug and alcohol testing per FAA’s regulation 14 CFR part 120, as well as 49 CFR part 40. QUALIFICATIONS WE PREFER: AAS degree in electronics and/or prior military experience strongly preferred. 2+ years’ experience with aviation manufacturing or repair is preferred. Holds or has ability to obtain Preliminary MRB (Materials Review Board) authorization. Experience reviewing CMM/SB (Compliance Maintenance Manual/Service Bulletin) documentation and creating mark-ups. SCHEDULE: 2nd Shift Schedule: Monday-Friday, 3:00pm-11:30pm WHAT WE OFFER BENEFITS: Some of our competitive benefits package includes: Medical, dental, and vision insurance Three weeks of vacation for newly hired employees Generous 401(k) plan that includes employer matching funds and separate employer retirement contribution, including a Lifetime Income Strategy option Tuition reimbursement program Student Loan Repayment Program Life insurance and disability coverage Optional coverages you can buy pet insurance, home and auto insurance, additional life and accident insurance, critical illness insurance, group legal, ID theft protection Birth, adoption, parental leave benefits Ovia Health, fertility, and family planning Adoption Assistance Autism Benefit Employee Assistance Plan, including up to 10 free counseling sessions Healthy You Incentives, wellness rewards program Doctor on Demand, virtual doctor visits Bright Horizons, child and elder care services Teladoc Medical Experts, second opinion program And more! Learn More & Apply Now! Avionics delivers advanced cockpit displays, vision systems, and comprehensive digital solutions for global government, commercial and business aviation customers. We provide connectivity and managed data services to ensure safety and seamless communication for passengers, crews, and militaries, from aircraft and airports to air traffic management. Join us in creating solutions that connect the world, one flight at a time. Start your application today. Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance employees, as they are essential to the development of our products. Regardless of your role type, collaboration and innovation are critical to our business and all employees will have access to digital tools so they can work with colleagues around the world – and access to Collins sites when their work requires in-person meetings. At Collins, the paths we pave together lead to limitless possibility. And the bonds we form – with our customers and with each other - propel us all higher, again and again. Apply now and be part of the team that’s redefining aerospace, every day. Collins Aerospace, an RTX company, is a leader in technologically advanced and intelligent solutions for the global aerospace and defense industry. Collins Aerospace has the capabilities, comprehensive portfolio, and expertise to solve customers’ toughest challenges and to meet the demands of a rapidly evolving global market. The salary range for this role is $46,938 - $88,035. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate’s work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company’s performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans’ Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

*As an Avionics Technician, here is what you’ll be doing at the core, day to day.* * Install and test complex avionics equipment and electrical systems on aircraft. * Comply with environmental health/safety policies and procedures. * Perform and document all work per appropriate manuals and regulations. * Remove, repair and re-install any problematic avionics equipment before aircraft is cleared. * Assemble and install electrical components. * Operate ground support equipment if required. * Provide accurate diagnosis of avionics problem(s). * Maintain detailed records of all repairs and worked performed on aircraft. *Here’s what is required to succeed as an Avionics Technician.* * Minimum of 1 year of work experience or substantiated equivalent experience. * Corporate jet aircraft or commercial aircraft experience preferred. * Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) is a plus. * High school diploma or equivalent required. * FAA Airframe and Powerplant (A&P) or Airframe (A) License is preferred. * GROL (General Radiotelephone Operator License) or AET (Aircraft Electronics Technician) Certification preferred. * Certification from Avionics, Electric A/C Technical school or equivalent military training is preferred. * Comfortable working with technology / entering aircraft maintenance actions into a computer-based system. * Ability to read and interpret blueprints. * Excellent analytical skills and attention-to-detail. * Strong working knowledge of aviation safety practices and technology. * Understand various aircraft systems, such as hydraulics and flight controls. * Ability to obtain a Security Identification Display Area badge (SIDA), if applicable. * Must be comfortable with shift work; we are a 24/7 operation with 12-hour shifts which include days, nights, and weekends. * Possess (basic) set of tools. * Ability to effectively communicate aircraft maintenance actions verbally and in writing. *Join us…here’s the why.* Do you have a passion for aviation? Are you eager to make a meaningful impact on customers? Do you aspire to a fulfilling career as an Avionics Technician? If yes, you’ve landed at the right place. At MHIRJ, we recognize and value your contributions to our One Unified Team. We live by our values and embody our behaviors which drive our success. Take flight with a team that shares your passion and supports your journey. Let’s soar together at MHIRJ! We provide comprehensive benefits for you and your family, as well as ample opportunities to grow your career. *Benefits for Employees:* * Uniforms Provided * 401k Plan with a Company Match of 7% * Paid Vacation, Floating Holidays & Sick Time * Medical, Dental, Vision & Prescription Coverage, including Flexible Spending * Wellness Incentives up to $750 * Short & Long Term Disability * Annual Bonus * Employee Mitsubishi Auto Discount _We do not discriminate in employment on the basis of race, color, religion, sex (including pregnancy and gender identity), national origin, political affiliation, sexual orientation, marital status, disability, genetic information, age, membership in an employee organization, retaliation, parental status, military service, or other non-merit factor._ #MHIRJ1 Job Type: Full-time Schedule: * 12 hour shift License/Certification: * FAA issued Airframe or Airframe and Powerplant License (Preferred) Shift availability: * Day Shift (Required) * Overnight Shift (Required) Work Location: In person

Essential Job Functions: Shall have authority to direct Level I work center personnel to accomplish specific maintenance actions as required to accomplish maintenance tasking in accordance with Department of Labor Skill Code definitions (responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts.) Shall receive technical guidance, as required, from supervisor or higher-level technician, will occasionally be required to lead teams through more complex aircraft relevant tasks. Knowledgeable in automatic flight control, stabilization systems, weapons integration systems and fuel quantity systems. Must be a technically qualified, experienced, and knowledgeable individual who is capable of exercising an appropriate level of responsibility in the F18 Avionics area. Provides technical support to electronic project engineers, shall utilize excellent organizational skills in prioritizing workload to meet daily flight schedule. Provides technical guidance and expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Minimum Education and Experience Required: * Military VMET or JST MUST be included with application to be considered (if prior military)* Candidate experience must be clearly defined on resumes by listing specific dates (month & year) and locations of relevant experience. Shall have minimum of five years US Navy/USMC/USCG O-Level CNAFINST 4790.2 (series) aircraft maintenance support experience. Minimum five years Organizational Level Avionics/Electrical experience on F18 aircraft (24 of the 36 months within last 3 years preferred). Knowledgeable in automatic flight control, stabilization systems, weapons integration systems and fuel quantity systems May be required to become Plane Captain certified in accordance with approved certification process for each T/M/S applicable to their background. High School graduate or equivalent. Specialized training courses are desirable. Must have a valid driver’s license. Must have a current U.S. Secret clearance and be able to maintain it. Must be available to work any shift. Travel may be required. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Avionics Technicians generally work on the communication, navigation, and surveillance systems, as well as the electrical generating components that power these systems. They install, inspect, test, and repair the avionics equipment and electronics, including communication and navigation radios, transponder, and DME systems, weather radar equipment, autopilot systems, and troubleshoot and diagnose these systems to LRU or component level. Installing and testing complex avionics equipment and electrical systems on aircraft. Ensuring that all avionics equipment works properly before take-off and that it does not interfere with any other electronic device. Repairing or replacing any defective avionics equipment before the aircraft's next flight. Interpreting blueprints and schematics to troubleshoot aircraft systems properly. Performing intricate and highly reliable soldering on failed electrical components. Providing accurate diagnoses of complex avionics problems. Organizing ground support and test equipment for ground tests. Analyzing flight test data to diagnose malfunctions and study the operations of the electrical or avionics components. Keep a constant watch for safety and ensure work performed adheres to the highest quality standards. Ensure proper and adequate equipment is used, acceptable parts or components are installed, and approved hardware or supplies are used. Core Schedule: Days: Monday thru Friday. Hours: 8:00 a.m. - 5:00 p.m. Some on-call or evening/weekend hours may be required. A&P License is required. Requires a minimum of 5 years' experience with diversified jet, turboprop, piston, modification, aircraft/flight maintenance, or airframe sheet metal maintenance. Must have experience in MROs. Prior experience with Cirrus, piston, or Light Jet aircraft, strongly preferred Operates all power tools and equipment necessary to accomplish job assignments. Preferred experience in a client service facility performing inspections and repairs on aircraft. Valid state driver's license. Requires arithmetic, blueprints, specifications, and knowledge of jet and piston airframe and engine principles. Previous work experience with aircraft electrical repair and with specific aircraft maintenance and repair manuals. Experience with systems such as NAV/COM/PULSE, Autopilot, GPS, and RVSM. Strong working knowledge of aviation safety practices and technology. An understanding of other aircraft, such as hydraulics and flight control. The ability to read and interpret blueprints schematics. Excellent analytical, attention to detail, troubleshooting, problem-solving, communication, and teamwork skills. Steady hands and excellent eyesight. Tenacious self-starter with a mature outlook. Proven ability to operate independently and achieve results. Able to multi-task and thrive in a fast paced and quickly changing environment. Flexibility in scheduling is required. Must successfully pass background check and drug test. Ability to read and respond to email communications. Expect it all at Jet Access and our family of companies, which provide premier private air travel, charter, aircraft management, sales, maintenance, flight training, airport operations, and management. Our Jet Access family members are the heart of our core values, the center of everything we do, and the foundation of our success. As a growing enterprise, we are committed to providing you with the tools and resources for a long and meaningful career with us. Expect a safe, positive, fast-paced, and growth-oriented environment. Expect a culture focused on the well-being and happiness of our Team Members and their families. Expect to work with a diverse and talented group of aviation professionals. Expect your voice to be heard. Expect to matter. Your future success is our priority - Expect it all. Perks and Benefits: A generous benefit package, competitive wages, paid vacation and holidays, excellent training programs, and discounted flight training. This is a tight-knit family with a collaborative and social environment. Leadership is compassionate, transparent, and believes in empowering employees to achieve, not only for the business, but also for their own personal success.

We are seeking a skilled and motivated Avionics or Electronics Technician to join our team. The ideal candidate will have hands-on experience working with electronic systems, excellent diagnostic skills, and a strong understanding of industry standards and safety protocols. Experience in the aviation sector and familiarity with FAA regulations is highly desirable. Key Responsibilities Interpret and work from technical drawings, schematics, CMMs, and detailed work instructions Use standard electronics bench test equipment including: Spectrum Analyzers Oscilloscopes (O-scopes) Multimeters Power Supplies Conduct troubleshooting, repair, and testing of electronic or avionics systems Ensure compliance with applicable FAA regulations and standards (FAR 145 knowledge is a plus) Utilize Microsoft Office applications (Excel, Word, Outlook) for reporting and documentation Navigate computer systems and web-based platforms efficiently Communicate effectively with team members and OEMs, as needed Preferred Qualifications Experience working with Aviation OEMs is highly desirable A&P License and/or Aircraft Electronics Technician (AET) Certification is a plus Strong understanding of FAA requirements for Part 145 repair stations Prior experience in avionics installation or electronic system repair (3–5 years preferred) Education and Experience Associate degree or technical school certification required Bachelor’s degree in electronics, engineering, or related field preferred Minimum 3–5 years of relevant hands-on experience in electronics or avionics

Job Profile : The Avionics Technician performs inspection, troubleshooting, repair, and installation of aircraft instrument and avionics components and systems in accordance with manufacturer specifications, FAA regulations, and Vista Aircraft Maintenance procedures. This role may also function as an Authorized Inspector, conducting in-process and final inspections for return to service. This position reports to the Maintenance Manager. Vista Aircraft Maintenance Van Nuys is an FAA-approved Part 145 Repair Station, offering complete nose-to-tail, airframe, powerplant, and avionics care, maintenance, inspection and repair services. The company serves as a dedicated maintenance provider for the Vista fleet. Your Responsibilities Execute tasks assigned by the Avionics Manager and/or Maintenance Manager to meet project deadlines and return-to-service goals. Troubleshoot, repair, test, remove, and replace avionics and instrument systems using appropriate tools, test equipment, and technical documentation. Ensure all work complies with aircraft maintenance manuals, regulatory requirements, and company policies. May perform Authorized Inspector duties, including final inspections and return-to-service approval as authorized. Document completed work accurately on work orders, including the removal and installation of parts and components. Provide technical support to internal and external customers, troubleshooting discrepancies and performing in-flight evaluations as needed. Maintain avionics test equipment and workspaces in accordance with company standards. Mentor less experienced technicians through on-the-job training (OJT) to develop team skills and maintain high work quality. Attend manufacturer and company technical training to improve technical proficiency and update personal training logs. Qualifications High school diploma or GED. Minimum 3 years of experience in a Part 145 environment; Part 135 experience is a plus. Hands-on experience with Gulfstream and Bombardier aircraft preferred. Strong understanding of maintenance reference materials, including maintenance manuals, illustrated parts catalogs, and component manuals. Proficiency with CMP and CAMP maintenance tracking programs. Excellent verbal and written communication skills in English. Benefits: Medical, dental, and vision plans 401k program with company matching and 100% vested immediately Life Insurance and Long/Short term Disability Employee Assistance Program Empty Leg Flight Benefits & Customized Travel Site with Delta Airlines The salary range for this position is $67,000 - $137,000+ per year. Why choose Vista America? Company Culture: Our culture revolves around problem-solving, teamwork, and industry innovation leadership. No two days will be the same, your career with Vista America will be dynamic, challenging, and exciting. Operational Excellence and Innovation: Industry leader in private aviation with numerous career advancement opportunities. Certified™ Great Place to Work®, highlighting employee satisfaction and career development. Commitment to Safety and Excellence: Wyvern Wingman® Certified, Vista America has a history of performance adhering to rigorous safety practices and continuously surpassing benchmarks. State-of-the-Art Facilities: Over 4,000 aviation experts operating out of 35 offices globally, with modern, state-of-the-art maintenance facilities. Luxury World Class Fleet: We are committed to the highest standards. Our fleet is comprised of highly sought after aircraft, provided with white-glove opulent service that is guided by an obsessive attention to detail and craftsmanship. The affiliated operating partners of Vista are equal employment opportunity employers. The affiliated operating partners of Vista do not discriminate against any applicant or employee based on race, color, religion, national origin, gender, age, sexual orientation, gender identity or expression, marital status, mental or physical disability, and genetic information, or any other basis protected by applicable law. The affiliated operating partners of Vista also prohibit harassment of applicants or employees based on any of these protected categories.

_*JOB DESCRIPTION – FORMATTED TO BE SHARABLE*_ *30% - *Assemble, modify & install wire bundles, conductors & other electrical components *30%* - proper documentation & logging critical information *30% *- Read & Interpret schematics assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc *10%* - Others projects as assigned * Able to assemble, modify, and install wire bundles, conductors and other electrical components. * Clearly document work performed, control equipment status tags, log critical information during installation, verify parts requests, etc.. * Read and interpret schematics, assembly drawings, process specifications, wiring diagrams, technical manuals, written instructions, etc. * Able to use a variety of manual hand tools such as crimpers, strippers, wire cutters, heat shrink gun, complex, specialized aircraft test equipment, etc. * Effectively communicate, orally and written, with other employees, members of supervision, and others, as required in their duties. * Perform assigned duties on all shifts without encumbrances due to weather or physical location and conditions, also while wearing required safety equipment. _*MINIMUM REQUIREMENTS FOR CONSIDERATION*_ * 3+ years bare MIN of electrical/avionics aviation *production *_(they will NOT be doing MRO type work so production background is necessary)_ * Can have rotary or fixed wing (_but will be working rotary onsite_) * Strong preference on helo / military (aerospace) experience * Knowledge of various *aviation *electrical components Job Type: Full-time Pay: $34.00 - $38.00 per hour Benefits: * Health insurance Schedule: * Day shift * Monday to Friday * Weekends as needed Ability to Commute: * Philadelphia, PA 19114 (Preferred) Ability to Relocate: * Philadelphia, PA 19114: Relocate before starting work (Preferred) Work Location: In person

Build an Aviation Career You’re Proud Of Build your career with integrity by working at a company that doesn’t just treat you like a number. You’ll get the tools to do things right in a clean and safe work environment and the trust to fix any issue that comes your way. Our on-the-job training and team of experts mean you’ll be set up for success. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency and quality. As an Avionics Technician II , you’ll be responsible for Installs, tests, troubleshoots, and/or repairs electrical/avionics equipment and systems, including Flight Management Systems (FMS,) Satcom and Airborne Radio Telephone Systems, EGPWS/TAWS, communications, navigation, radar, TCAS/XPDR, DME, autopilot/flight director, audio, ADF, Cabin Management/In-flight Entertainment (IFE), and other sophisticated avionics/electronics systems. You’ll route wire throughout aircraft tying into both new and factory installed wire bundles and may assist in functional checkout and troubleshooting of all wiring systems. You’ll also perform less difficult assignments without assistance or supervision. Care and precision must be exercised in order to ensure quality installations, on-time deliveries, and customer satisfaction. Directly and openly communicates with customers regarding the status and time frame of repair while a professional appearance and communication skills are required in order to create a positive and lasting professional relationship. What you’ll do: Fabricates wiring harnesses; solders connector plugs; strips and hand lugs wiring; identifies wiring and fabricates and installs surface control indicating systems; performs terminal splicing; wires junction boxes; routes wiring and conduit; and performs any other electrical bench or installation work as necessary to complete the electrical repair or modification of the aircraft. Uses electrical hand tools, testing equipment, and soldering equipment. Documents all work accomplished (a.k.a. sign-off) in a clear, concise and accurate manner. Adheres to shop standards, various manufacturers’ standards and practices and has knowledge of various federal and military standards including FAA Advisory Circulars. Works fair share of overtime and travels to customer locations or other Standard Aero facilities as required. Responsible for knowing, understanding, following, promoting and continuously improving company policies and procedures. Observes all safety, environmental and general housekeeping rules and policies. May perform other duties as required by the department. What skills you will use: Must be authorized to work in the U.S. High school diploma or equivalent. Formal avionics systems and/or electronics education/training. Minimum 2-year’s experiences in electronics and/or avionics in the aviation industry or military equivalent. Must be able to lift up to 50 pounds, walk, bend, stretch, and climb ladders. Must have the ability to think clearly, speak intelligibly on the telephone and in person. Must have the ability to manipulate equipment of all sizes, tools, computer keyboards, and telephones. Must be able to see to disassemble and visually inspect. Must be able to hear to detect the sources of problems. Must have excellent hand-to-eye coordination. Must have good interpersonal and verbal skills in order to interface with customers and employees. Preferred Characteristics AET A&P license Salary: $28.44 - 35.00, based on experience Benefits that make life better: Comprehensive Healthcare 401(k) with 100% company match; up to 5% vested Paid Time Off starting on day one Bonus opportunities Health- & Dependent Care Flexible Spending Accounts Short- & Long-Term Disability Life & AD&D Insurance Learning & Training opportunities

Avionics Mechanics with Dash-8 Experience Required for short term Opportunity based in Oklahoma City, Oklahoma. $40-45/HR Responsibilities Performs wire harness build ups, connector installation, terminating, soldering Provides technical assistance and guidance as required by the position. Performs on and off aircraft electrical modification to electrical wiring and system components which includes but is not limited to: wire / harness / connector / component removal, installation, & repairs, routing, terminations, continuity checks, troubleshooting, and AC/DC & disturbed systems operational checks verifications. Maintain assigned aircraft in accordance with Military Technical Orders, Manufacturer and Company Instructions. Use provided test equipment and Ground Support Equipment to perform assigned tasks. Assist with ordering parts, tools, materials, and equipment as required. Responsible for adhering to all applicable Foreign Object Damage (FOD) prevention rules and regulations. Must comply with established General and Industrial Safety Rules and Regulations as applicable to the contract, facilities, and job assignment. Ensure proper operation and use of special test equipment and Ground Support Equipment. Maintain appropriate records of all work accomplished. May be required to perform simple computer input functions. May be required to work in a confined space. Use arithmetic involving decimals and fractions. May monitor and verify quality in accordance with statistical process or other control procedures. Must be able to utilize computer-based systems to perform duties. Fabricate detail parts from blueprint or engineering instructions Requirements A&P license (preferred) Minimum 2 years of experience on military aircraft OR 4 years of experience with civilian aircraft required Proficiency in troubleshooting, repairing, and maintaining aircraft avionics and relative tasks Ability to interpret technical manuals and blueprints Strong attention to detail and a commitment to safety US citizenship or authorization to work in the United States. Must be willing/able to work any shift or schedule. Utilize precision measuring instruments like air data test sets and other equipment to ensure system integrity May be required to lift weights of up to 50 lbs. ZykqBGUeXU

Full-time Contract Position – Vandalia, OH Our Client delivers customer-focused operations and best-of-breed integrations in the aerospace and defense sectors. Through leading-edge technologies and transformative solutions, it has been honored as one of the most innovative U.S. companies in space, a Tier One Superior Supplier for the U.S. Air Force, and one of America’s fastest-growing corporations. The Mission Solutions and Technologies (MST) team also provides affordable, turn-key command/control, communications, integrated ISR, force protection, and security solutions worldwide. #InnovatingBeyondLimits The Company Our Client’s mission is to stay ahead of the curve, developing solutions today to tackle the challenges of tomorrow. With over 60 years of leadership, they have driven transformative change in the aerospace and defense industry. Their innovative solutions provide connected protection through advanced command, control, and communications platforms, along with capabilities in ISR, cyber, electromagnetic spectrum management, and more, ensuring national security across multiple domains. Dedicated to expanding the industrial base and delivering open architecture platforms, our client plays a crucial role in fostering competition, providing value, and accelerating innovation. Their ability to scale and commitment to open architecture set them apart in driving industry progress. The Position As an Avionics Technician III, you will apply advanced technical skills to perform avionics maintenance in compliance with FAA, FCC, and company regulations. This role involves installing, testing, troubleshooting, and repairing complex avionics systems and components. You will also be responsible for maintaining calibration on test equipment, managing tools, and keeping technical manuals up to date to ensure peak performance and safety. Duties & Responsibilities Perform avionics maintenance and repairs in compliance with FAA, FCC, and company regulations Install, troubleshoot, test, and repair avionics components and systems Interpret and work from technical schematics, diagrams, blueprints, and manuals Route and secure wiring according to technical drawings Maintain, calibrate, and operate avionics test equipment and tools Ensure compliance with safety protocols, especially in handling hazardous materials and working in high-noise/outdoor environments Support aviation safety by inspecting aircraft structures, systems, and components Operate or supervise the use of vehicles, machinery, or heavy equipment as needed Supervisory Responsibilities No immediate direct reports Skills & Qualifications High school diploma or GED equivalent and typically 5 or more years of relevant experience Higher education may substitute for relevant experience Relevant experience may be considered in lieu of required education Must have own tools in good working order Ability to understand and interpret basic applicable technical schematics, diagrams, blueprints, manuals, and/or publications; ability to route wires per technical drawings Advanced skills with avionics installation tooling, wiring, wiring repair, wiring installation, soldering, and crimping techniques Preferred Skills Familiarity with FCC (Federal Communications Commission) and FCC GROL (Federal Communications Commission General Radiotelephone Operator License) Basic understanding of spectrometer, oscilloscope, and/or pitot static equipment Background in the Aerospace and Defense Industry, the US Department of Defense or US Military Ability to obtain and maintain a Security Clearance Work Environment On-site position located in Vandalia, Ohio Compensation Position offers an hourly W2 Rate between $38-$42, with additional benefits Requirements Because this client is a Federal Government Contractor performing services for the DoD, US Air Force, NASA and others, they do require US, Non-Dual Citizenship Certificates, Licenses, Registrations None required Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. This company is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. Perks of the Job Health Benefits Multiple Healthcare plans are available, Vision, Dental, Medical, and Life insurance Paid Time Off Competitive Paid Leave plan includes 10 (PTO) days, 12 Paid holidays, and 5 sick days Financial Benefits Nonmatching, self-administered 401k program through Human Interest Top Tier Clients H2B works with resume-building Clients, offering vast opportunities for growth Professional Support Our employees are set up for success with the tools, training, and time they need Culture of Inclusivity We embrace difference, and we value diversity in our, and every, workforce

Live an Adventure, Master your Craft, Find your Purpose At Dynamic Aviation, we solve unique challenges for our customers with innovative aviation solutions. Our focus is on operations that serve, protect, and enhance the lives of families and communities worldwide. Whether modifying aircraft to help protect our service members overseas, performing geographical mapping for scientific research, or working to suppress large wildfires on the West Coast, we serve with integrity and excellence. Purpose: The Avionics Technician is responsible for installation, fabrication, modification, repair, fault isolation, and maintenance of aircraft. Company Compensation and Perks: • Pay (hourly) • Full time position • Comprehensive Benefits offered • Medical, Dental, Vision • HSA/FSA • Life Insurance, Long-Term and Short-Term Disability • Employee Assistance Program • 401(k) with Company Match • Paid Time Off (PTO) • Company Wellness Program Responsibilities: • Inspect, troubleshoot, repair, and perform both scheduled and unscheduled maintenance in a high-quality and efficient manner • Troubleshoot and test instruments, components, and assemblies using various tools such as circuit testers, oscilloscopes voltmeters, etc. • Inspect, maintain, and install electronic systems, such as navigational systems, radar technology, radio communication systems, flight control tools, and other avionics systems • Perform operational/functional checks on aircraft electrical systems and equipment • Operate equipment to test, diagnose, locate, and deficiencies • Utilize a strong understanding repair of electronic theory to effect timely repairs • Assemble components including switches, electrical controls, and junction boxes • Lay out installation of aircraft assemblies and systems • Install, route, upgrade, and repair wire harnesses • Install avionics equipment per engineering drawings while following wiring standards • Perform basic soldering, harness build up and installation including wire stripping and crimping, fault isolation and repair of avionics system failures • Read and interpret technical data including original equipment manufacturer maintenance manuals, illustrated part catalogs, wiring diagrams, service bulletins, etc.to direct maintenance repairs • Maintain a safe and clean work environment and report any unsafe conditions • Maintains responsibility for proper execution of parts tag instructions in accordance with the Repair Station Quality Control Manual • Maintain communication with assigned Team Lead for task updates and status reports • Other duties as assigned Requirements: • A&P license (preferred) • Extensive ability to read and use schematics and blueprints • High school education required; some college preferred • Electronics trade school or military training equivalent for repairing electronics preferred • Demonstrated experience in the fault isolation and repair of avionics systems • 2+ Years of recent hands-on avionics maintenance and modification experience • FAA Part 145 knowledge preferred • Work well with others in team environment • Experience working in AS9100 or ISO 9001 environment preferred • Ability to: lift, balance, and carry 50 lbs, crawl in and out of tight spaces, and predominantly work in enclosed hangars, occasionally in exterior weather conditions or elevated heights DA1 It is the policy of Dynamic Aviation to prohibit and eliminate discrimination on grounds of race, color, religion, sex, (including pregnancy, childbirth or related medical conditions), sexual orientation, gender identity, national origin, ancestry, age, disability, veteran status, marital status, or any other characteristics protected by law. It is also Dynamic Aviation's policy to provide equal employment for all and comply with any affirmative action obligations pursuant to the Federal Executive Orders, 11246 and 11375, as amended.

Job ID: 694637BR Date posted: May. 29, 2025 Description:Develops physically, tests, and evaluates complex prototype aircraft and aircraft-related electronic, electrical, and allied systems and modifies and adjusts such systems to achieve operational criteria and integration with complete weapons systems under experimental laboratory conditions and under the direction of engineering personnel. Builds and tests prototype electronic, electrical, and allied systems where basic methods, procedures and other guide lines are established but require some deviations from design or shop practice and otherwise assists engineers and higher rated technicians in test activities and development projects. Determines necessary methods, operations, and sequences, makes initial layouts of electronic circuit bread boards and component arrangement, and develops entire prototype electronic and allied systems and equipment such as radar, microwave, aircraft power system mock-ups, guidance, communications, antennas, radomes, and transmission lines requiring ingenuity in devising and adapting various new and unproven electronic units, equipment, and devices to satisfy special-purpose needs. Develops missing and improved design and other details and/or makes changes in systems components and circuitry utilizing a complete knowledge of electronics theories and principles, including advanced circuitry, and a comprehensive practical knowledge of functions, capacities, and limitations of electronic and associated equipment. Determines methods and sequences for testing operations, selects and sets up test equipment, and records and evaluates results of such tests as required. Devises test apparatus for experimental laboratory testing and development programs, determines measurement standards, and makes sketches as required. Operates and tests the above Company-designed, customer, and purchased electronic and allied systems, including making microwave, radio frequency and dielectric measurements where test procedures have not been developed in order to verify the performance and characteristics of such systems, including their integration with allied systems. Troubleshoots and corrects systems malfunctioning and suggests necessary changes and improvements for engineering approval. Works from complex engineering drawings, schematic and wiring diagrams, sketches, and from written and verbal engineering instructions. Builds, lays out, fabricates, and assembles chassis, panels, housings, support and similar items for electronic and allied systems and equipment including radar, microwave, aircraft power system mockups, guidance, communications, antennas, radomes and transmission lines, working from drawings, schematics, diagrams or other instructions where design of construction details may be incomplete necessitating some deviation from specified design or shop practice in order to produce acceptable units. Installs and wires all types of delicate and expensive prototype electronic components, sets up test apparatus such as voltmeters, oscilloscopes, signal generators, impedance bridges, frequency measuring devices, computerized test equipment, and bench and environmental test equipment such as cold boxes, dust and altitude chambers and vibration machines and conducts tests of electronic systems where procedures have been established. Adjusts and calibrates systems as required, repairs malfunctioning units discovered during test by removing and replacing faulty components such as resistors, capacitors, coils, vacuum tubes, transistors, and other solid state devices. Sets up and operates power tools such as hand brakes and shears, sanders, and power saws to fabricate items required for developmental programs in the area of electronic and allied systems. Works with various types of new materials and prototype electronic devices and uses precision hand tools and measuring instruments. Performs associated duties such as improvising special shop aids and fixtures, making up radio and radar cable ass GAhourly Basic Qualifications: 1. Successful completion of formalized electronics training program, including mathematics through algebra, electrical/electronics through solid state theory and analysis, basic computer/circuits, and basic transmitters/receivers. Training of this type normally requires 1200 to 2000 training hours to complete. Graduates of Electronic Technology programs from the State Vocational School or a Military Electronics School must have been completed within last 10 years.. AND 2. Three of the last ten years experience in aircraft avionics systems development and/or maintenance in a laboratory, shop or at an organizational, or depot level. NOTE: Employees whose experience has been working on a flight line should be reviewed closely to ensure that training and experience is consistent with the job requirements of an Electronic Systems Experimental Technician Desired Skills: Advanced knowledge of aircraft electronics & electrical systems; testing, repairs, and development Clearance Level: None Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 4x10 hour day, 3 days off per week Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. Join us at Lockheed Martin, where your mission is ours. Our customers tackle the hardest missions. Those that demand extraordinary amounts of courage, resilience and precision. They're dangerous. Critical. Sometimes they even provide an opportunity to change the world and save lives. Those are the missions we care about. As a leading technology innovation company, Lockheed Martin's vast team works with partners around the world to bring proven performance to our customers' toughest challenges. Lockheed Martin has employees based in many states throughout the U.S., and Internationally, with business locations in many nations and territories. Experience Level: Hourly/Non-Exempt Business Unit: AERONAUTICS COMPANY Relocation Available: Possible Career Area: Manufacturing Type: Full-Time Shift: First

If you're an experienced Avionics Technician with expertise in Garmin systems, The Blackhawk Group is seeking your talent to join our dynamic team in Broomfield, CO. This vital role supports our aircraft maintenance operations by performing avionics maintenance, troubleshooting complex systems, and ensuring all components meet industry safety standards. As an Avionics Technician, you will play a key role in maintaining the high-quality standards that our clients rely on. If you have a passion for aviation electronics, a sharp eye for detail, and the technical expertise to keep aircraft systems operating safely and efficiently, we want to hear from you! Key Responsibilities: · Perform avionics recurrent scheduled maintenance and troubleshooting on various systems including Com, Nav, DME, WX Radar, EFIS, and Altimeters · Conduct system repairs, pitot/static and transponder system testing, and RVSM checks · Execute equipment installations and modifications, including database and firmware updates · Maintain detailed documentation for airworthiness directive and service bulletin compliance · Perform incoming and outgoing inspections on avionics systems · Stay updated with the latest industry advancements and technological developments · Follow electrical schematics and maintain Instructions for Continued Airworthiness (ICA) compliance Required Qualifications and Skills: · Experience with avionics tooling including Multimeter, Megger, and Milliohm meter · Proven expertise in troubleshooting and repairing avionics systems · Strong knowledge of altitude reporting systems and RVSM requirements · Experience with Datalink Weather and Traffic Systems, GPWS, etc. · Ability to perform pitot/static and transponder system testing · Must live locally or be willing to relocate · Willing to work overtime, including weekends · Strong attention to detail and adherence to safety standards Preferred Qualifications: · Avionics associate's degree · A&P license · Installation experience with various makes and models of MFD, GPS, and Nav/Com · Expertise with Garmin systems (G600, GTN750), L3 trilogy, GMX200, GTS820, and GTX33/32 · Previous experience with Garmin, Honeywell, and L3 systems · Strong problem-solving and troubleshooting skills · Ability to adapt to new technologies and advancements in the aviation industry Why Join Us? At The Blackhawk Group, you'll be part of a fast-growing company that empowers employees and values continuous improvement. We provide in-depth training throughout the year, including annual OEM training. You'll contribute to an exciting team focused on delivering exceptional service to the aviation industry, helping aircraft operators maximize performance and efficiency. About The Blackhawk Group The Blackhawk Group stands at the forefront of innovation, modernization, and collaboration within the light turbine aircraft market. By uniting the collective strengths of its multiple business units and locations across the U.S., the company is redefining the standards of the light turbine market. Driven by deep expertise and a dedication to exceptional customer experiences, The Blackhawk Group provides unparalleled and proprietary solutions that address the unique needs of aircraft operators throughout every aspect of aircraft ownership. The mission is to be the premier service provider for light turbine-powered aircraft, delivering exceptional customer experiences with unique, data-driven solutions through an empowered and engaged team. Established in December 2021, The Blackhawk Group has quickly become a premier provider of sales, services, and upgrades for the light turbine market with locations in Broomfield CO, Loveland CO, Camarillo CA, Waco TX, and Columbia MO. The platform includes market leaders such as Blackhawk Aerospace, known for engine, aircraft, and avionics upgrades for turbine-powered aircraft; AVEX Aviation, a leading provider of sales and maintenance for the Daher TBM; and Finnoff Aviation, recognized for engine, propeller, and other upgrades for the Pilatus PC-12. The company's commitment to performance improvement and unparalleled service is evident through its exclusive engine and STC upgrades, which enhance aircraft capabilities to unrivaled levels. By maintaining a singular focus on maximizing aircraft performance and value, The Blackhawk Group ensures its solutions meet industry desires for greater performance and utility while minimizing downtime. What We Offer: The Blackhawk Group provides a comprehensive benefits package and a work environment that propels your growth and supports the mutual success of our people and our company. The Blackhawk Group’s benefits provide the flexibility to choose the benefits that make the most sense for you and your family: Medical, Dental, and Vision Insurance Supplemental insurance Employer provided life insurance Immediate PTO Accrual 401k Matching 8 Paid Holidays Training and Development Tuition Reimbursement The Blackhawk Group is an Equal Opportunity Employer, employment with The Blackhawk Group is governed on the basis of merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Apply today and become part of a team that’s taking the aviation industry to new heights! Pay Range: $35- $43per hour

Monday - Friday 7:00 AM - 3:00 PM Primary Duties & Responsibilities: Assigns and supervises daily tasks for avionics technicians. Mentors and trains junior technicians, promoting a culture of safety, accountability, and excellence. Conducts shift briefings and coordinates workload to ensure efficient execution of maintenance tasks. Performs advanced troubleshooting, inspection, repair, and installation of avionics and electrical systems including communication, navigation, radar, autopilot, and entertainment systems. Reads and interprets blueprints, wiring diagrams, and technical manuals. Ensures all work is performed in compliance with FAA regulations, OEM specifications, and company policies. Ensure compliance with internal and FAA inspection and documentation requirements. Conducts quality checks and signs off work to ensure airworthiness standards are met. Coordinates with Maintenance Control, Engineering, and Quality Assurance departments. Interacts with customers or inspectors as needed to address avionics-related concerns. Review technical documentation including work orders, wiring diagrams, and service bulletins. Installs and functionally tests electrical/avionics components and systems on aircraft per engineering specifications and drawings to ensure a defect free system; Submits work for inspection & approval. Troubleshoots and repairs systems using acceptable practices including splicing, soldering, and wire termination. Assists other Line and Install Technicians in the aircraft as required. Use the Corridor system to enter daily labor against correct Work Order and item numbers. Reviews work, including forms and records, to ensure compliance with Inspection Procedures Manual, Operating Procedures and FAA regulations. Supervise, guide, and mentor avionics technicians performing maintenance and installations on aircraft systems (navigation, communication, flight control, etc.). Coordinate daily work schedules to meet production timelines and quality standards. Conduct inspections, functional tests, and troubleshooting on complex avionics systems. Interface with engineering, quality assurance, and planning teams to resolve discrepancies and support continuous improvement. Maintain accurate records of work performed and ensure timely completion of required documentation. Lead or participate in root cause analysis for avionics-related issues and implement corrective actions. Provide training and technical guidance to team members; support onboarding of new technicians. Performs other duties as required. Education & Experience: Avionics training at a technical school or equivalent experience required. FCC or A&P license preferred. High school diploma or GED required; associate degree or technical school training preferred. FAA Airframe & Powerplant (A&P) or Repairman Certificate preferred. FCC General Radiotelephone Operator License (GROL) or equivalent certification is a plus. Minimum 5 years of experience in avionics maintenance, with 1–2 years in a lead or supervisory role. Experience working with general aviation, commercial, or military aircraft. Sills & Abilities: Strong computer skills. Excellent interpersonal and leadership skills required to facilitate the building of a team as well as to support avionics sales efforts Strong team-oriented work ethic. Believes in and harnesses teamwork to achieve goals. Self-starter: takes initiative to lead in areas of responsibility. Acts with honesty and integrity. Physical Requirements: Must be able to stand, stoop, kneel, crouch and crawl. Occasional periods of walking, sitting, rotation, bending, pushing, pulling, and reaching. Occasionally lifting up to 50 lbs, and frequently lifting up to 10 lbs. Work Environment: Frequent exposure to general shop conditions, engine noise. Frequent exposure to aircraft exhaust, moving mechanical parts, lubricants, metals, and solvents. Frequent exposure to seasonal weather. Equal Employment Opportunity We participate in E-Verify Equal Opportunity Employer (M/F/D/V) Drug Free Workplace

VP Aviation is seeking several Avionics Technicians for MRO maintenance on regional aircraft offering highly competitive pay rates! *About VP Aviation:* VP Aviation was founded to provide quality aircraft maintenance services to MROs, Airlines and Repair Stations nationwide. Our maintenance teams consist of AOG, Projects and Hourly employees. We are a fast-growing company where honesty and loyalty are our key values. *Details: * * This is a contract position with the opportunity to be long term. * Repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance. * Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and company. * Apply deductive reasoning to troubleshoot and repair and/or check complex systems. * Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment. * Properly utilized and maintain Avionics hand tools to perform repairs and installations. Keep leadership and coworkers apprised of work progress and/or problems. * Accurately document work performed as set forth by company and customer maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence. * Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors. * Other duties may be assigned. *Requirements:* * Minimum of 2 years of work experience, or substantiated equivalent experience. * Corporate jet aircraft or commercial aircraft experience preferred. * Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) is a plus. * FAA Airframe and Powerplant (A&P) or Airframe (A) License is preferred. * GROL (General Radiotelephone Operator License) or AET (Aircraft Electronics Technician) Certification is a plus. * Certifications from Avionics, Electric A/C Technical school or equivalent military training is preferred. * Must have tools. * Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing. * Must be comfortable with 12-hour shift work, which includes days / nights and weekends. Job Type: Contract Pay: From $1,600.00 per week Benefits: * Health insurance Experience: * Avionics: 1 year (Required) Work Location: In person

$2,000.00 Hiring Bonus Description: NSI requires a Avionics Technician to support PMA 265 MAGNA-I Program Office. The Avionics technician candidate will troubleshoot and repair some of the following complex electronic systems, employing the latest test equipment and procedures: digital computers; fiber optics; infrared detection; radar systems; electricity generation systems; laser electronics; navigation systems; communications equipment; electrical power distribution; pressure indication systems; electric transformers and circuits; testing aircraft instruments and systems such as automatic flight controls, inertial navigation, and compass systems; installing changes, alterations, and modifications to aircraft electronics systems; performing micro-miniature module repair on computer circuit cards; using a variety of electrical measuring and diagnostic equipment; reading electrical system diagrams; repairing and maintaining power generators and electric motors. Preferred Experience: Aviation Electrician rating or the Aviation Electronics Technician rating / equivalent MOS. Location: Miramar, CA Education: BS or BA degree in Electrical Engineering or related field preferred. Experience: At least 10 years’ experience on F/A-18 A/C preferred. Ability to perform all functions in primary area of expertise but also required to “cross-pollinate” in other A/C functional areas to assist other team members as required. Provide and assimilate cross-training so all team members can assist in all functional areas. QAR/CDQAR Inspection of maintenance procedures that will affect safety of flight. Skills/Certifications Preferred: • Seat Crane operator • Wire connector certified • Avionic corrosion control certified • Electric cart qualified • Ordnance Handler TM/TL Security Clearance: Secret Clearance is required. Must be a U.S. citizen. Special Notes/Instructions: NSI is a privately held, small but quickly growing company with headquarters in Lexington Park, Maryland within 5 miles of the Patuxent River Naval Air Station. Established in 2004, we are now celebrating 21 years of excellence in providing quality products and services to the Department of Defense. Our benefits package includes medical, dental, vision, Long Term Disability, Life Insurance, Short Term Disability, paid time off, paid holidays, flexible spending account, employee assistance program, tuition assistance program, 401k Plan with company match as well as a fun and enthusiastic work environment! To Apply: NSI offers a team-oriented work environment and a competitive compensation and employee benefits package. If you have a commitment to excellence and want to join our team of top caliber professionals, we invite you to submit your resume electronically by visiting our careers website at: https://n-s-i.us/careers/apply/. Quality, Integrity, Teamwork, Success – that's NSI! NSI is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. XJ6

Amentum is in seeking a qualified Avionics/Electronic Bench Technician II to support our operations at Naval Air Station in New Orleans, LA. The Avionics/Electronic Bench Technician II diagnoses malfunctions and repairs Avionic Test Equipment, observes and trains under higher grade workers on diagnosis and repair on less complex repair/maintenance problems, solves repair problems by studying drawings, wiring diagrams, schematics, and technical publications; uses automated maintenance data systems to monitor maintenance trends, analyze equipment requirements, maintain equipment records, document maintenance actions, analyzes, diagnosis and repairs Avionic Test Equipment to component level using conventional and digital multi-meters, voltmeters, ohmmeters, frequency counters, oscilloscopes, circuit card testers, transistor testers, and hand tools. This technician also does the following: disassembles and assembles malfunctioning test equipment accessories and components, removes, repairs, cleans, treats for corrosion, to include sandblast and paint. This technician performs scheduled and unscheduled maintenance on Avionic Test Equipment, inspects, tests, and operates Test Equipment to determine equipment serviceability and proper operation, diagnoses mechanical and electronic circuitry malfunctions using visual and auditory senses, test equipment, and technical publications. This technician stencils and marks Avionic Test Equipment in accordance with technical publications, stores, handles, labels, uses, and disposes of hazardous materials and waste in accordance with all state, local, and federal environmental standards and regulations. This technician practices good housekeeping, tool control, Foreign Object Damage prevention, and safety at all times. Performs routing and non-complex assignments involving responsibility for planning and conducting a complete project of relatively limited scope or a portion of a larger and more diverse project. Selects and adapts plans, techniques, designs, or layouts. Reviews, analyzes and evaluates test results and prepares reports on findings and recommendations. Minimum Requirements Minimum of three (3) years' aviation experience in electronics maintenance/repair, or a military equivalent of three (3) years of hands-on experience. High School diploma or GED. Graduate from a two (2) year Electronics Technician resident course at an accredited institute. Must have an International Society of Certified Electronics Technicians (ISCET) certification. Able to read and understand aviation electrical schematics and wiring diagrams, to include component identification and function. Must be able to obtain a Security Clearance for issuance of a Common Access Card (CAC). Must be able to speak, read and understand English. Must be a U.S. Citizen. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

General Atomics Aeronautical Systems, Inc. (GA-ASI), an affiliate of General Atomics, is a world leader in proven, reliable remotely piloted aircraft and tactical reconnaissance radars, as well as advanced high-resolution surveillance systems. We have an exciting opportunity for an Avionics Technician supporting Test Operations at our Flight Operations Facilities located at either Gray Butte (Palmdale) or El Mirage (Adelanto) in sunny Southern California. In this role you will be working on cutting edge technology utilizing your experience to further the development of new hardware and software, adding new capabilities to airborne sensing and weapons systems, and sustainment of customer fleets including MQ-1C Gray Eagle, MQ-9A Reaper, and MQ-9B SkyGuardian, SeaGuardian, and Protector systems. Responsible for the entire Unmanned Aircraft System, you will be modifying and configuring aircraft and ground control stations to meet customer specified test programs, executing ground tests, and supporting flight test activities. This includes flightline activities such as preflight, mission monitoring for system performance, and postflight data collection. DUTIES AND RESPONSIBILITIES: The successful candidate will service, troubleshoot, repair, inspect, and maintain aircraft and ground support equipment in support of test operations and sustainment activities in accordance with maintenance documentation. Support test teams for test and development (R&D) efforts. Modifies, installs, and tests electronics and mechanical equipment as part of customer and company modification and test efforts. Corrects major and minor discrepancies by removal, repair, or replacement of defective or deleted parts of aircraft electrical and avionics systems as well as ground support systems (ground stations, ground data terminals and SATCOM terminals). Performs scheduled maintenance and functional checks on existing, newly installed and modified aircraft systems and equipment as well as ground support systems (ground stations, ground data terminals (GDT) and SATCOM terminals); disassembles, assembles, and adjusts electronic equipment. Operates test equipment to locate, diagnose, and repair defective parts and performs routine inspections on systems and equipment. Troubleshoots, tests, and documents findings; repairs or replaces components based on test results by following technical drawings, schematics, handbooks, engineering documents, customer and company technical manuals and other technical guidance. Fabricates, upgrades, routes, and installs wiring harnesses. Supports company and customer flight test activities at various locations in support of test objectives. Includes but not limited to Flight Engineer duties, launch and recovery efforts and reports. Opportunities for cross-training into other disciplines. Other duties as assigned or required. We recognize and appreciate the value and contributions of individuals with diverse backgrounds and experiences and welcome all qualified individuals to apply.45112 Job Qualifications: Typically requires education or formal training equivalent to the completion of a two-year technical degree or trade school equivalency as well as two or more years' experience in aviation or electronics. Equivalent professional experience may be substituted in lieu of education. Must be able to perform a variety of routine tasks and demonstrate full knowledge of avionics and electronic procedures and principles. Must possess: The ability to troubleshoot at the component level Full knowledge and use of electronic test equipment, hand and soldering tools, voltage or amperage measuring and recording devices Knowledge of relevant computer applications, operations, and networking The ability to read and interpret technical drawings, schematics and technical orders Good analytical, interpersonal, verbal and written communication skills to accurately document, report and assess situations and make judgments. The ability to work both independently and in a team environment is essential. The ability to work any shift and additional hours as required. Ability to obtain and maintain DOD SEC clearance is required. Salary:$56,180 - $83,518Travel Percentage Required 0 - 25Relocation Assistance Provided Provided US Citizenship Required? YesClearance Required? Desired Clearance LevelMid-Level (3-7 years) WorkstyleOnsite

Avionics Technician III (Weekend Nights) in GAC St. Louis $10,000 Sign-On Bonus Eligible. Unique Skills: Looking for support on 5th shift (Weekend Nights). Additonal Requirements Blueprint efficient. Previous install experience. The compensation range for this role is $34.02 - $39.69 per hour. Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location. Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes: Medical, prescription, dental and vision coverage Life and disability insurance Retirement savings plan Employee assistance plan Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance. Education and Experience Requirements High School Diploma or GED required. 5 years experience in an avionics/electrical career field. 2 years of accredited schooling in aviation electronics may offset two years of experience requirement. A & P license, FCC license or NCATT certification preferred. Position Purpose: Provides technical expertise while performing various operational, functional tests and repairs of avionics/electronic, aircraft equipment and systems to ensure a defect free aircraft. Provides superior technical expertise in testing, troubleshooting and repairing system discrepancies to ensure minimum schedule impact. Demonstrates technical expertise and y defining and implementing process changes to reduce cost and meet schedule without compromising Safety or Quality. Job Description Principle Duties and Responsibilities: Essential Functions: Demonstrates superior technical skills and expertise in avionics and acft systems operational testing and troubleshooting . Teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system . Ensures quality and efficiency of all installations: troubleshoots and teaches troubleshooting processes/concepts to provide timely, quality repairs of malfunctioning systems . Demonstrates the skills and knowledge required. to effective and efficiently repair or replace defective components and wiring to ensure installations meet conformity. Demonstrates effective repair techniques using acceptable practices including splicing, soldering and pinning of wiring . Oversees the performance and compliance with engineering changes and modifications as required. Sets up and operates necessary test equipment. Conducts functional and operational tests to evaluate performance and reliability . Demonstrates through diligent compliance the importance of maintaining daily logs and other paperwork. Ensures that all work performed on the acft is properly and completely documented . As required, pre-inspects work of others prior to submitting to inspection for approval to reduce rework and inspection time . Provides the knowledge and technical expertise in testing and maintaining test equipment and electronic systems and components as required. Enforces the company FOD program, tool control program, 5-S program and all safety regulations . Adapts to sudden schedule changes . Coordinates with other disciplines concerning projects . Additional Functions: Where required, teaches the installation and functionally testing of electrical/avionics components and systems per Engineering specifications, drawings and maintenance manuals ensuring a defect free system . Self inspection capability for all avionics testing functions in applicable areas . In support of acft certification and final phase testing, may include flight tests on acft as required. . Perform other duties as assigned. Other Requirements: Preferred proficiency in the operation and troubleshooting of other acft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. APU run qualification and engine run qualification preferred. Ability to read and interpret basic blueprints and schematic diagrams. Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 226410 Category: Service Center Percentage of Travel: Up to 25% Shift: Weekend Nights Employment Type: Full-time Posting End Date: 08/01/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-AU1

Elliott Aviation, a leader in aircraft solutions, has an exciting opportunity for an Avionics Technician at their location in Moline, IL. Since 1936, Elliott Aviation has been a world-class provider of comprehensive and customer-focused solutions for business aviation. Our vision, building partnerships that last, applies to our employees as well as our customers. Multiple shifts are available. This position assists with installation, troubleshooting and repairing, and other general tasks related to the maintenance, installations and repair of Avionics systems and components on a variety of aircraft product models. Responsibilities of this position include: Troubleshoots and repairs all avionics equipment and electrical systems on aircraft Communicates with department manager or crew chief on any problems or repairs Ensure all work performed is inspected by an authorized repair station inspector Prepares various documents for record keeping purposes as required by company policies, FAA approved repair station and quality control manuals, all FAA regulations, OEM aircraft manufacturer manuals, etc. Learns, understands and follows the company work order and parts requisition process as written. Maintains a clean, neat, and efficient work area Repairs and calibrates shop equipment as assigned Top candidates will possess: Willingness to work on a team with both experienced technicians and mentor junior technicians with a calm demeanor Ability to communicate well in straightforward situations Organizational skills and attention to detail Ability to maintain a safe and clean work environment Ability to analyze and interpret professional journals, technical procedures, or governmental regulations Ability to write reports, business correspondence, or procedural manuals Excellent mechanical aptitude and a desire to work Other requirements include: Experience working on and troubleshooting aircraft avionics and airframe systems Thorough knowledge and understanding of FARs 43, 91, 135, 145. Experience working with and repairing the following aircraft systems: Autopilots, Flight Management Systems, Navigation and Communication Systems, EFIS, Aircraft Electrical Systems, Lighting, Pitot and Static Systems Any bench repair capabilities preferred A&P License / FCC License a plus Benefits of living in the Quad Cities: Moline, IL is located in the Quad Cities, a dynamic family of communities on the Mississippi River where the river bends to run directly from east to west. This bi-state (IA/IL), multi-city region is the largest metropolitan area between St. Louis and Minneapolis on the upper Mississippi River. At 16% below the national average cost of living, the Quad Cities has been included in the top 4 Most Affordable Places to Live in the US 3 years running. Our facility shares a runway with the Quad Cities International Airport, giving our worldwide customers access to our state-of-the-art facilities. Veterans relocating to Iowa may be eligible for up to $8,250 in relocation incentives through Home Base Iowa Learn more about the Quad Cities: https://youtu.be/zG8nrKgvAhc Benefits & Perks Elliott Aviation takes pride in offering a competitive and comprehensive benefit package to its employees to ensure our team is well cared for. Benefits begin the first day of employment! Sign-on Bonus and relocation bonus potential Health, Dental and Vision Insurance- Significant cost are contributed by Elliott Aviation as part of our commitment to providing a comprehensive benefit program. Plus, you can earn lower rates through our wellness program. RXnGo Pharmacy benefit – Generic prescription coverage at zero cost to the employee Time Off – You will receive 8 paid holidays and paid vacation. Relocation Assistance Provided for most of our positions 401(k) – Company Match Company Sponsored short-time and long-term disability as well as life insurance Employee Assistance Program (EAP) – Confidential consultation and resources services 24/7 Training and Education- On average, Elliott Aviation invests upwards of $3,000 per team member on development of technical skills as well as soft and leadership skills

Job Title: Avionics Technician III Pay Rate: Up to $40.00/hr DOE Location: Englewood, CO Zip Code: 80112 Job Status: Contract Start Date: Right Away Keywords: #avionicstechjobs #coloradojobs #nowhiring ***Must Have an Active Secret Clearance*** JOB RESPONSIBILITIES: * Perform avionics maintenance according to FCC, FAA and company policies and regulations. * Will be responsible for installing, testing, troubleshooting and repairing avionics components, and maintaining test equipment, tools, and manuals. * Frequently walk, sit, stand, climb stairs and steps. * Frequently repeat same hand, arm, and finger motion many times to include finger and hand dexterity. * Frequently requires vision abilities to include close, distance, depth perception, and telling the difference between colors. * Frequently requires hearing abilities to include discerning different tones and volumes. * Occasionally lifting or carrying up to 50 lbs. * Frequently exposed to outdoor elements (high/low temperatures, sun, rain/snow, etc.) * Frequently exposed to fumes or hazardous chemicals/materials. * Frequently exposed to loud noises. * Responsible for the safety or security of people or property. * Inspects, handles, or transports explosives, dangerous or hazardous materials. * Inspects structures, equipment or vehicles. Performs aviation related duties. * Operate or supervise vehicles, heavy or dangerous equipment or machinery REQUIRED QUALIFICATIONS: * Must be a US Citizen * Current Active Secret Clearance * High school diploma or GED equivalent and typically 5 or more years of relevant experience * A higher-level degree may substitute for experience * Related experience may be considered in lieu of required education * Must have own tools in good working order * Ability to understand and interpret basic applicable technical schematics, diagrams, blueprints, manuals, and/or publications; * Ability to route wires per technical drawings * Advanced skills with avionics installation tooling, wiring, wiring repair, wiring installation, soldering, and crimping techniques PREFERRED QUALIFICATIONS: * Familiarity with FCC and FCC GROL * Basic understanding of spectrometer, oscilloscope, and/or pitot static equipment * Background in the Aerospace and Defense Industry, the US Department of Defense or US Military If you are interested in this role, please apply via the apply now link provided. Our overriding goal is to provide quality staffing solutions that help people, organizations, and communities succeed. Belcan is a leading provider of qualified personnel to many of the world's most respected enterprises. We offer excellent opportunities for contract, temporary, temp-to-hire, and direct assignments. We are the employer of choice for thousands worldwide. For more information, please visit our website at Belcan.com Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws. #cjobs

*Experience:* * Minimum four years of UH-60, MH-60R, CH-47 direct experience in aircraft maintenance or Military technical school. * *HEAVY MODIFICATION EXPERIENCE REQUIRED* * *NO TOOLS REQUIRED!!!!!* *Essential Functions:* * The Avionics Mechanic installs units, parts, equipment, and components in avionics assembly, according to blueprints and specifications provided. * Fabricates and assembles prototype equipment for a variety of military aircraft and is familiar with military technical manuals, technical orders, modification work orders and blueprints. * Coordinates with project engineer personnel throughout the project and provides technical assistance to project engineers. * Services, repairs and overhauls aircraft to ensure airworthiness. * Repairs, replaces, and rebuilds aircraft components, such as wiring harnesses, power distribution systems, and functional components including communication/navigation systems, and flight control/aircraft monitoring systems using hand tools, power tools, machines, equipment, soldering irons, and connector installation tools. * Reads and interprets maintenance manuals, technical manuals, FAA FAR’s and commercial aircraft manuals. * Services batteries to keep aircraft in safe operating conditions. * Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools. * Performs other duties as assigned. *Education:* * High School Diploma or GED required Job Type: Contract Pay: $30.00 - $35.00 per hour Benefits: * Health insurance Schedule: * 8 hour shift * Day shift * Evening shift * Monday to Friday * Weekends as needed Work Location: In person

About HAECO Americas Headquartered in Greensboro, NC, with facilities in Lake City, FL, HAECO Americas is a global, world-class aviation company providing services ranging from aircraft maintenance, repair, and overhaul to the manufacturing of aircraft interior products. HAECO Americas is one of the leading aviation corporations in the world. We pride ourselves on safe, high-quality aviation products and services for our customers, as well as security and growth for our most valuable asset -- our people. Why HAECO Americas A career with HAECO Americas is your chance to connect with a world leader in aircraft maintenance and interiors. Your career at HAECO will expose you to the best practices of aircraft maintenance on Boeing and Airbus wide-body and narrow-body jets for major airlines and operators. As a HAECO team member, you will learn from the industry’s best, pick up new skills, and continue your professional development. We offer a flexible, high-energy work environment with opportunities to innovate, learn and grow - doing work that matters. The sky is the limit on how far your potential could take you at HAECO Americas. HAECO Americas offers an array of benefits designed with the health and welfare of our employees in mind. • Comprehensive Benefit Plans • Health Savings Account • Career Progression Program • Paid Premiums for Certifications/Shifts • Paid Time Off • Employee Discounts • Relocation Assistance (if applicable) • 401k Savings Plan • Employee Assistance Program • Certification Assistance and Tuition Reimbursements • Collaborative and Safe Work Environment Position Overview The Avionics Technician is responsible to perform operational checks, troubleshoot, and repair avionics and electrical systems on all types of aircraft. The Avionics Technician must perform a variety of installation and maintenance tasks on avionics hardware and wiring assemblies. The Avionics Technician must work within estimated time and in accordance with applicable HAECO Airframe Services, FAA, and customer standards of quality. • Perform such typical maintenance functions as cabling, component removal/installation, wire harness removal/installation, fabrication/repair of wire harness assemblies, and continuity checks. • Determine if work can safely be accomplished if aircraft is in a power-on mode and be able to conduct necessary testing if in a power-on mode. • Fabricate and install all wiring assemblies and associated mechanical equipment. • Remove and install avionics systems. • Follow all applicable specifications to accomplish a specific task. • Follow Customer aircraft maintenance documentation programs. • Followwiring diagrams, engineering drawings, Illustrated Parts Catalog, ATA Codes, Service Bulletins and Maintenance Manuals. • Read electrical schematics and use them to troubleshoot and repair aircraft avionics systems. • Maintain a clean and safe working environment. • Be familiar with ESD processes and requirements • Be aware of EWIS requirements • Must efficiently perform tasks. • Follow all safety procedures and specifications with appropriate PPE. • Execute all required paperwork as work is being completed in connection with assigned normal duties. • Use and operate ground support equipment, as applicable and if qualified, in a safe manner. • Complete assignments with little or no rework. • Act as a mentor and help train less experienced avionics technicians. • Interface effectively with members of management, other departments, and co-workers. • Perform other work as instructed by the Avionics Lead or Maintenance Supervisor, if qualified. What you need: (Requirements) • High School diploma or equivalent. • Must provide own tools as indicated on company tool list. • Language (read, write, speak, and understand English). • Eighteen (18) months or more of experience troubleshooting and effecting Avionics repairs on Military, Commercial transport aircraft or two (2) or more years proven performance competence within HAECO. • Subject to noise more than 85 dbs. • Be able to bend, stoop, kneel, and/or stand for prolonged periods of time and climb ladders and/or service stands. • May be exposed to hazardous chemicals and requires the use of all safety equipment. • Must be able to breathe through a full-face respirator. Employees with facial hair will be required to purchase a hood to meet respirator requirements. • Job requires participation in the DOT random drug and alcohol testing program. • Normal or corrected hearing. • Capable of lifting fifty (50) pounds. • Minimum visual acuity of 20/40 corrected. Preferred • FAA Airframe and Powerplant or FAA Airframe certificate. • FCC License. This company considers candidates without regard to their race, color, religion, sex, sexual orientation, gender identity, and national origin.

VP Aviation is seeking several Avionics Technicians for MRO maintenance on regional aircraft offering highly competitive pay rates! *About VP Aviation:* VP Aviation was founded to provide quality aircraft maintenance services to MROs, Airlines and Repair Stations nationwide. Our maintenance teams consist of AOG, Projects and Hourly employees. We are a fast-growing company where honesty and loyalty are our key values. *Details: * * This is a contract position with the opportunity to be long term. * Repair, modify, install, and perform routine maintenance of all Avionics systems with accuracy and with minimal assistance. * Accurately interpret maintenance manuals, service bulletins, wiring diagrams, system schematics, drawings, engineering orders and other documents from both the customer and company. * Apply deductive reasoning to troubleshoot and repair and/or check complex systems. * Properly utilize Avionics test equipment to perform systems test and keep abreast of new and advanced test equipment and the use of such equipment. * Properly utilized and maintain Avionics hand tools to perform repairs and installations. Keep leadership and coworkers apprised of work progress and/or problems. * Accurately document work performed as set forth by company and customer maintenance programs on a daily basis using the standard format. Prepare routine reports and correspondence. * Fabricate per drawings and standard practices wire bundles and assemblies to include marking of wires, properly securing wires into bundles, and termination of wires into a variety of contacts and connectors. * Other duties may be assigned. *Requirements:* * Minimum of 2 years of work experience, or substantiated equivalent experience. * Corporate jet aircraft or commercial aircraft experience preferred. * Military aircraft maintenance experience (Depot/Isochronal/Phase inspections) is a plus. * FAA Airframe and Powerplant (A&P) or Airframe (A) License is preferred. * GROL (General Radiotelephone Operator License) or AET (Aircraft Electronics Technician) Certification is a plus. * Certifications from Avionics, Electric A/C Technical school or equivalent military training is preferred. * Must have tools. * Ability to effectively communicate in English aircraft maintenance actions both verbally and in writing. * Must be comfortable with 12-hour shift work, which includes days / nights and weekends. Job Type: Contract Pay: From $1,600.00 per week Benefits: * Health insurance Experience: * Avionics: 2 years (Required) Work Location: In person

Avionics Technicians generally work on the communication, navigation, and surveillance systems, as well as the electrical generating components that power these systems. They install, inspect, test, and repair the avionics equipment and electronics, including communication and navigation radios, transponder, and DME systems, weather radar equipment, autopilot systems, and troubleshoot and diagnose these systems to LRU or component level. Installing and testing complex avionics equipment and electrical systems on aircraft. Ensuring that all avionics equipment works properly before take-off and that it does not interfere with any other electronic device. Repairing or replacing any defective avionics equipment before the aircraft's next flight. Interpreting blueprints and schematics to troubleshoot aircraft systems properly. Performing intricate and highly reliable soldering on failed electrical components. Providing accurate diagnoses of complex avionics problems. Organizing ground support and test equipment for ground tests. Analyzing flight test data to diagnose malfunctions and study the operations of the electrical or avionics components. Keep a constant watch for safety and ensure work performed adheres to the highest quality standards. Ensure proper and adequate equipment is used, acceptable parts or components are installed, and approved hardware or supplies are used. Core Schedule: Days: Monday thru Friday. Hours: 8:00 a.m. - 5:00 p.m. Some on-call or evening/weekend hours may be required. A&P License is required. Requires a minimum of 5 years' experience with diversified jet, turboprop, piston, modification, aircraft/flight maintenance, or airframe sheet metal maintenance. Must have experience in MROs. Prior experience with Cirrus, piston, or Light Jet aircraft, strongly preferred Operates all power tools and equipment necessary to accomplish job assignments. Preferred experience in a client service facility performing inspections and repairs on aircraft. Valid state driver's license. Requires arithmetic, blueprints, specifications, and knowledge of jet and piston airframe and engine principles. Previous work experience with aircraft electrical repair and with specific aircraft maintenance and repair manuals. Experience with systems such as NAV/COM/PULSE, Autopilot, GPS, and RVSM. Strong working knowledge of aviation safety practices and technology. An understanding of other aircraft, such as hydraulics and flight control. The ability to read and interpret blueprints schematics. Excellent analytical, attention to detail, troubleshooting, problem-solving, communication, and teamwork skills. Steady hands and excellent eyesight. Tenacious self-starter with a mature outlook. Proven ability to operate independently and achieve results. Able to multi-task and thrive in a fast paced and quickly changing environment. Flexibility in scheduling is required. Must successfully pass background check and drug test. Ability to read and respond to email communications. Expect it all at Jet Access and our family of companies, which provide premier private air travel, charter, aircraft management, sales, maintenance, flight training, airport operations, and management. Our Jet Access family members are the heart of our core values, the center of everything we do, and the foundation of our success. As a growing enterprise, we are committed to providing you with the tools and resources for a long and meaningful career with us. Expect a safe, positive, fast-paced, and growth-oriented environment. Expect a culture focused on the well-being and happiness of our Team Members and their families. Expect to work with a diverse and talented group of aviation professionals. Expect your voice to be heard. Expect to matter. Your future success is our priority - Expect it all. Perks and Benefits: A generous benefit package, competitive wages, paid vacation and holidays, excellent training programs, and discounted flight training. This is a tight-knit family with a collaborative and social environment. Leadership is compassionate, transparent, and believes in empowering employees to achieve, not only for the business, but also for their own personal success.

Viranim Technical Solutions is seeking an experienced F-16 Avionics Technician to support O-Level maintenance operations at Hill AFB, UT. This position requires deep technical expertise in F-16 A-D avionics systems, the ability to work independently, and a collaborative spirit to engage with both Contractor Logistics Support (CLS) and government maintenance personnel. The successful candidate will play a critical role in troubleshooting complex avionics issues, training personnel, planning modifications, and supporting material reclamation activities. Primary Responsibilities: Perform O-Level maintenance on F-16 C/D avionics systems. Troubleshoot and maintain the following systems: APG-83 Radar MIDS-J Datalinks HOBiT Helmet Mounted Cueing System Automatic Ground Collision Avoidance System (AGCAS) Center Display Unit (CDU) APX-125 Advanced Identification Friend or Foe (AIFF) 3-D Audio ARC-210 Communication Systems Memory Loader Verifier (MLV) Wiring troubleshooting Avionics software capabilities Assist CLS provider and government maintenance teams in diagnosing complex avionics maintenance issues on F-16 A-D platforms. Provide proficiency training in the troubleshooting and isolation of malfunctions in computerized avionics test stations and related support equipment/systems. Advise and assist in the identification and proper use of specialized tools, handling gear, and developmental/test support equipment. Develop and implement local informal training programs to improve maintenance and inspection quality; identify areas where formal training is needed. Provide technical analysis and consistent advice to resolve unusual maintenance challenges; recommend changes as applicable. Support accident/incident investigations and assist in the development of failure reports. Promote and instruct safe work practices to all customer personnel. Additional Responsibilities - Ogden, UT Specific: Assist in planning F-16 modification schedules and estimating associated time and cost requirements. Coordinate with logistics teams on repair points of contact (POCs) and maintain communication with field-level contacts to stay informed on current events and needs. Material Harvesting and Reclamation Support: Provide support for material harvesting from adversary aircraft. Disassemble aircraft to the fullest extent feasible, tag and inventory reusable and repairable components. Ensure adherence to COMNAVAIRFORINST 4790.2 series guidelines and all applicable handling and packaging instructions during the reclamation and storage process. Submit complete written component inventories for all reclaimed materials. Required Qualifications: Minimum 3 years of experience in F-16 C/D avionics O-Level maintenance. Strong working knowledge and hands-on experience with listed avionics systems and diagnostic tools. Ability to work independently with minimal supervision. Demonstrated experience developing and delivering informal technical training. Excellent interpersonal skills, with the ability to work professionally and cooperatively with both military and civilian personnel. Active U.S. Government Security Clearance

JOB DESCRIPTION Griffon Aerospace, a leader in the exciting Unmanned Aerial System (UAS) industry, is seeking a talented Avionics Technician/Aircraft Electrician to fabricate, test, and support the operation of UASs and other aerospace-based products. This position is within the Griffon Manufacturing organization and interfaces with Griffon's Engineering, Flight Test and UAS Flight Operations Staff. The growing Madison, AL-based small business is seeking innovative individuals who want to join an up tempo, maker culture that proudly provides products and services to support the American Warfighter! REQUIRED SKILLS/EXPERIENCE Read and understand technical drawings, datasheets, and work instructions Use of DMM, dc power supplies and battery chargers for setup and testing Use electronic, hand, power, and pneumatic tools Soldering of circuit and harness assemblies Assembly of electromechanical systems/sub-systems Familiarity with AS9100 quality programs Modification and fabrication of electrical harnesses, RF cables and assemblies Installation avionics modules, harnesses and RF cables into UAV airframes Installation, testing and troubleshooting of combustion engine and fuel system installations Setup equipment for outdoor testing for systems operation and test data collection Keep organized and maintain all work related tools, test equipment, fixtures, etc. Ability to travel on a limited basis to remote testing ranges High School Graduate Ability to lift 35 lbs often and work standing up for a full 8hr shift DESIRED SKILLS/EXPERIENCE Training & knowledge of UAV, UAS and/or FAA aviation avionics electronics and standard fabrication practices Current training to IPC/WHMA-A-620, J-STD-001, NASA STD 8739.4, or comparable Testing and troubleshooting of airframe harness and electronic assemblies Setup and testing of heavy fuel engine systems Repair and calibration of avionics modules according to specifications Experience with LAN data cables and RF communication coax fabrication and antenna installation Write procedures, update BOMs and other related documentation Computer communication skills in Outlook, Word, Excel CAD/CAM Applicable technical degree or equivalent military experience JOB LOCATION Madison, Alabama, United States POSITION TYPE Full-Time/Regular COMPENSATION/BENEFITS Competitive Salary/Comprehensive Benefits Package US CITIZENSHIP REQUIRED Yes ABILITY TO OBTAIN A SECURITY CLEARANCE Yes

*Job Summary* Veterans Alliance is actively seeking an experienced Avionics Technician for a contract-to-hire opportunity in Philadelphia, Pennsylvania, supporting rotary-wing aircraft in a maintenance environment. This position is ideal for technicians with strong avionics skills, a valid A&P license, and the flexibility to work 2nd shift. *Veterans and transitioning service members are strongly encouraged to apply.* *Key Responsibilities* * Perform installations, troubleshooting, and repairs of avionics systems on rotary-wing aircraft * Route, terminate, and secure wire bundles, conductors, and avionics hardware * Interpret engineering drawings, wiring schematics, and OEM documentation * Conduct operational checks and verify system functionality post-installation * Maintain accurate documentation in accordance with FAA and company standards * Ensure compliance with all safety, regulatory, and quality requirements * Collaborate with maintenance and QA teams to ensure on-time delivery of aircraft *Qualifications* * High school diploma or GED * *Valid FAA Airframe & Powerplant (A&P) License – REQUIRED* * Minimum 5 years of avionics maintenance experience – REQUIRED * Rotary-wing aircraft experience in a maintenance environment – REQUIRED * Must be able to work 2nd shift * Strong attention to detail and ability to interpret technical documentation * Authorized to work in the U.S. * Must pass background check and drug screening * Tools required *Additional Details* *Location:* Philadelphia, Pennsylvania *Platform:* Rotary-Wing Aircraft *Environment:* Maintenance *Assignment Type:* Contract-to-Hire *Tools Required:* Yes *Interview:* Resume-based selection (phone or virtual may be conducted) *Pay Rate:* $35.00 – $46.00/hr (based on experience) *Per Diem:* Up to $1,520/week *Shift:* 2nd Shift (must be available) *Apply Today* If you're an experienced Avionics Technician with rotary maintenance experience and an A&P license, Veterans Alliance wants to hear from you. Join a team dedicated to quality, safety, and mission success. *Send your resume or inquiries to:* *Michael Rodman* mrodman@veterans-alliance.com Job Type: Full-time Pay: $35.00 - $46.00 per hour Benefits: * Dental insurance * Health insurance * Vision insurance Schedule: * 8 hour shift * Overtime Work Location: In person

SUMMARY: The Ignition Exciter Technician will perform maintenance and alteration tasks on civil aviation articles in accordance with the current technical data provided in the manufacturers’ Instructions for Continued Airworthiness, Services Bulletins, service letters, Airworthiness Directives, government and industry standard practices, and other data acceptable to or approved by the FAA. DUTIES & RESPONSIBILITIES: Responsibilities include, but are not limited to: Complete review of component work order to ensure proper work scope is initiated. Perform functional test for all Ignition Exciters inducted. Disassemble electrical aircraft engine accessories with the use of hand tools and soldering stations. Remove foam potting with precision detail to prevent damage from detail piece parts within the component. Perform functional test for all Ignition Exciters inducted. Document maintenance records of all repair work orders performed. Remove identification and safety labels from components with use of a scraper/razor blade. Ensures up-to-date knowledge of all tools and proper use of equipment within assigned area of responsibility. Administer foam potting back into the components after they are assembled. Other duties as assigned. MINIMUM REQUIREMENTS: High School Diploma/GED equivalent 1-2 years of relevant/technical work experience Flexible to changing workloads/priorities based on customer requirements. Maintain an orderly and productive work environment. Ability to function in fast paced environment while maintaining a high level of quality. Basic computer operating skills (Word). PREFERRED REQUIREMENTS: 3+ years of relevant experience in aviation MRO industry. High Mechanical aptitude. OTHER (INCLUDE LICENSES, CERTIFICATIONS, SECURITY CLEARANCE, TRAVEL REQUIREMENTS, ETC.): The selected applicant will be subject to a background check and drug testing. VSE is an Equal Opportunity/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, Protected Veteran status, sexual orientation, or any other characteristic protected by federal, state or local law. At VSE, we don’t just hire employees; we nurture careers and champion well-being. We understand that our success is driven by the people who make up our incredible team, and that’s why we’re committed to providing a workplace that goes beyond just a job-it’s a place where you can truly flourish. When you choose VSE, you’re choosing a company that prioritizes YOU. Let us tell you why: Time Off: Enjoy Paid Time Off to relax and recharge. Family Support: We offer Paid Maternity Leave and Paid Bonding Leave, along with access to our Employee Assistance Program, ensuring your family’s well-being. Education: Pursue your educational goals with Tuition Reimbursement for Undergrad, Technical, and Graduate Programs. Financial Security: We offer a 401(k) and Employee Stock Purchase Plan to secure your financial future. Healthcare: Your health is essential, and we provide Health, Dental, and Vision Care. Flexible Spending: Take advantage of HSA, FSA, and Dependent Care plans for added flexibility. Insurance: We've got you covered with Short-Term and Long-Term disability insurance. Competitive Salaries: Your hard work is rewarded with competitive salaries. Ready to be part of a company that values you as much as your skills and expertise? Join VSE and let’s take your career to new heights while ensuring your well-being every step of the way. Come grow with us. Your future begins here. Apply TODAY!

Apex Aviation is excited to have a startup satellite location in Bermuda Dunes, California! We are looking for qualified Lead Avionics Technician to join our team! Apex Aviation is Headquartered at the Henderson Executive Airport in Southern Nevada. We are an FAA approved Part 145 Repair Station serving the corporate and general aviation industries. Highly qualified factory trained technicians provide aircraft maintenance, major repairs and major alterations, modifications, avionic upgrades and avionics installations, and overhauls for Turbine Aircraft, Piston Aircraft, Turboprop Aircraft and Rotor Aircraft. We provide professional interior and exterior aircraft detailing. We work on many types of aircraft, such as Gulfstream, Cessna, Bombardier, Lear, Eclipse that range from mid-size and large size cabin. The AOG Go-Team at Apex is a global mobile repair team with no borders. We have traveled as far south as Australia and as far north as Siberia... literally. Founded in March 2014, Apex is on a path of steady, strategic growth. *Position Summary* Lead Avionics Technician is the person responsible for building and maintaining a profitable avionics department per FAA and industry standards. Reports to the General Manager. Delegates Avionics Technicians daily work task. *Qualifications/Skills* * Minimum of 5-years’ experience managing an FAA Part 145 Certificated Repair Station Avionics Department * Meet experience requirements to qualify for an FAA Repairman Certificate per FAA CFR 65 * Strong management, supervisory and leadership skills. * Excellent communication skills, both verbally and in writing. * Effective customer service skills. * Driver’s License * 10-years’ experience managing an FAA Part 145 Certificated Repair Station Avionics Department * FAA Mechanics Certificate with Airframe and Powerplant Ratings * Bachelor’s Degree in related field *Primary Job Functions* * Responsible for the leadership, organization and delegation of the avionics technicians. * Sets priorities and schedules day to day avionics maintenance operations. * Provides leadership, technical expertise, and guidance while performing various operational/functional tests and repairs of avionics/electronic aircraft equipment and systems to ensure airworthy aircraft. * Ensures that all inspections are properly performed, and the proper inspection records, reports, and forms used by the repair station, are properly executed prior to the release of the aircraft for return to service. * Demonstrates technical expertise and leadership by defining and implementing process changes to reduce cost and turnaround times without compromising Safety or Quality. * Coordinates crossover of jobs between all departments. * Ensures training currency for the Avionics Department is maintained as defined in Company Manuals. * Provides daily aircraft status updates for avionics work to upper management. * Provide the customer with timely and accurate quotes for maintenance/modifications requested. * Ensures Avionics Department labor hours are accurately recorded on aircraft work orders. * Other duties as assigned. *Physical Demands* The physical demands described here are representative of those that must be met by an employee to successfully perform required duties. While performing the duties of this job, the employee is regularly required to: * This position requires standing for long periods, and some team lifting to approximately 50-75 lbs. * Individual must be able to go into small and confined spaces to perform maintenance on airplanes. * Must be able to climb and descend stairs. * Must maintain space and situational awareness around aircraft. * Must be able to work in austere conditions. * Ability to work in and support a team environment. * Needs to be able to support AOG Team and some weekend work may be needed. *Additional Notes* * Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Pre-employment and random drug screening per FAA/DOT regulations apply. Job Type: Full-time Pay: $50.00 - $52.89 per hour Expected hours: 40.00 per week Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Paid time off * Vision insurance Schedule: * 8 hour shift * Day shift * Monday to Friday * Morning shift Work Location: In person

We are committed to providing a stable, growth-oriented and inspiring work environment that offers opportunities for professional, personal and financial growth. If you are interested in joining a growing team, where YOU are our most valuable asset, then Royal Aircraft Services (RAS) is the place for you. Responsible for the effective use of available manpower to accomplish task assignments requested by Hangar/Line Manager or RAS Maintenance Control to the highest level of reliability and safety in accordance with all applicable RAS manufacturer and FAA policies, procedures, manuals and regulations. DUTIES/RESPONSIBILITIES: Performs aircraft maintenance to include inspection, operational test, repair, and modification of aircraft electrical/avionics systems. Applies advanced technical knowledge to solve complex problems and to provide technical assistance, guidance and instruction to other employees as needed. Possess a high degree of expertise on aircraft electrical/avionics systems. Demonstrates in-depth knowledge of applicable maintenance/technical manuals and publications, and special tools and test equipment. Must be familiar with operational capabilities and limitations of electrical/avionics systems. Possess a thorough working knowledge of the detection, prevention, and treatment of corrosion. Performs the troubleshooting and rewiring of complex avionics/electrical systems and subsystems discrepancies and modifications. Uses and interprets schematic diagrams to diagnose and repair malfunctioning avionics, electrical systems, and environmental systems in accordance with the Company maintenance program. Use precision measuring instruments and test equipment to conduct operational and functional checks of installed avionics, electrical, and environmental systems in accordance with the Company maintenance program. Modifies Company aircraft in accordance with approved engineering orders, STCs, and properly documents completion of modification. Maintains and repairs aircraft avionics, electrical, and flight environment/air data components in accordance with Company and manufacturer’s manuals, including policies, bulletins, and orders. SUPERVISORY RESPONSIBILITIES: The Avionics Lead Technician is responsible to the GM for managing the avionics, electrical, and environmental system maintenance effort for Royal Aircraft Services. This includes maintaining, installing, removing, and replacing avionics systems and components on Company aircraft. Provides day to day management of the avionics shop, managing the technicians to meet scheduled and unscheduled maintenance requirements. Ensures compliance with safety policies and procedures found in Company manuals. Recommend budget and manpower needs to ensure sufficient resources workforce, tooling, and spares) are available to meet demands. Manage special projects developed such as STCs, modifications, etc. Attend available schools and keep current on the latest aircraft changes and modifications. Enhance interdepartmental relations through close coordination on electrical systems maintenance issues. Assists with technical support to line stations as required. Develops Company work cards and procedures relating to system testing and maintenance. Advises on proposed avionics, electrical, and environmental modifications. Assist other Company personnel in repairing malfunctioning aircraft avionics, electrical, and environmental systems. Track and evaluate new avionics software upgrades that apply to Company aircraft. Notify the Planner and Records Department of software upgrades that need to be incorporated. Reviews departmental capabilities and seek out other opportunities for expansion. Responsible for the evaluation, training, progression, and hiring of avionics technicians. Point of contact for Avionics Systems. Initiates avionics EOs, TDAs and FCDs as required. Manages aircraft FDR and CVR data systems. Performs other duties as assigned by the General Manager. Ensure Avionics technicians maintain current training status on tasks assigned. Ensure all paperwork is complete and accurate on all aircraft and components completed by the Avionics Department in accordance with RAS policy and procedures. QUALIFICATIONS: Airframe and Power Plant License. Must have two years avionics troubleshooting experience on equipment typically installed on aircraft. Extensive knowledge of aircraft avionics systems functions and interactions. Preferred experience performing checks and recertification of altimeters/encoding and transponders. Thorough working knowledge of all current FAA Regulations. Thorough working knowledge and use of MM, IPC, SRM and other manufacturers repair and troubleshooting documents. Thorough working knowledge of blueprints, work orders and task cards to determine type of configuration and special instructions prior to installation. Extensive knowledge of aircraft accessories, components, and other hardware. Comprehensive knowledge of estimating hours and materials for completing projects. Complete knowledge of aircraft fasteners and applications. Complete knowledge of all related skill area machines, equipment, and hand tools. Ability to operate aircraft systems. Ability to do engine "run-up" and "trim engines". High School diploma or equivalent. Must have a good command of the English language, both written and verbal. Must possess a valid driver’s license. SPECIAL POSITION REQUIREMENTS: Wear appropriate PPE as designated in each work area (e.g., safety glasses, etc.) TRAINING REQUIREMENTS: Must successfully complete RAS indoctrination training within 90 days of hire. Must successfully complete RAS training as assigned. Quality System Awareness WORKING CONDITIONS AND PHYSICAL EFFORT: Work performed in a hangar environment on a regular basis. Occasional travel to line stations. Exposed to any number of elements but with none present to the extent of being disagreeable. May work at different workstations as needs require or shifts from one station \ location to another. Royal Aircraft Service is an equal opportunity employer.

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what’s next. Let’s define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they’re well taken care of and ready to get our customers to their desired destinations. If you’re ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. Are you passionate about aviation? Would you like to maintain some of the biggest and best aircraft in the world? If so, there’s no better place to be than United Airlines. We’re looking for a full-time Aircraft Maintenance Technician (AMT) who has valid Airframe & Powerplant certification to join our Technical Operations team in one of United’s domestic HUBS. In this vital role, you will provide service and maintenance for aircraft systems, Powerplant, Airframe and Components. You’ll handle a wide variety of duties that make every day different, including inspections, preventive maintenance, troubleshooting, parts replacement and repair, as well as routine maintenance. Keeping our fleet flight-ready Strong mechanical competence and attention to detail are crucial for this critical position. Unlike smaller regional airlines, you’ll have the opportunity to work on larger, highly sophisticated aircraft with United. We will rely on you to be a great teammate, receiving and providing support as you collaborate professionally and seamlessly with your co-workers. You will generally be working out in the elements, so you must be capable of handling weather extremes. You will likely roll up your sleeves, but for those who enjoy hands-on work, it’s all part of the job. Many routes to success We offer initial training, specialty classes and recurrent training in technical areas and on other topics such as ethics and compliance. With experience, drive and determination to excel, you can move into a variety of roles, including management, inspection, quality control, fleet planning and others. After gaining seniority, you’ll have the opportunity to transfer to other locations within our outstanding network. Flexibility and dependability are essential Since this is a union position based on seniority, you will be assigned an initial schedule designed to meet our needs at the airport. You must be available for any shift within a 24/7 operation, weekends and holidays. You may be required to work mandatory overtime, when necessary. Punctuality and reliability are essential – we’ve got flight schedules to meet! The rewards for your expertise and work ethic Great benefits, including several plan options. Flight privileges from day one: you and your family can fly anywhere in the world on stand-by. Time off: you’ll have at least two days off in a row and can earn vacation days based on length of service. Qualifications What’s needed to succeed (Minimum Qualifications): High School Diploma or GED/Educational Equivalent FAA A&P License Valid US Drivers License Computer literacy Must pass a background check and drug screen upon contingent job offer An eagerness to learn and willingness to train The ability to access elevated aircraft areas via ladders, lift trucks, boom lifts and other devices The strength to lift 50 pounds, physical flexibility and the ability to work in confined spaces Legal authorization to work in the United States without sponsorship The starting rate for this role is $36.90. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact JobAccommodations@united.com to request accommodation.

Why join us? Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. Bombardier’s Benefits Program With our employees’ well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: Insurance plans Dental, medical, life insurance, disability, and more Competitive base salary Retirement savings plan Employee Assistance Program What are your contributions to the team? Adhere to General Work Requirements Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft Perform maintenance on customer aircraft in accordance with applicable technical data and FAA/JAA regulations Access and re-install aircraft components, which obstruct the performance of assigned tasks Perform basic mechanical and electrical removals and installations Document work performed per Inspections Procedures Manual (IPM) Work on aircraft as well as in shops Perform other tasks, for example, cleaning aircraft using approved materials, methods, and equipment, load and secure ballast and/or freight as required Coordinate with technical representatives, lab, and other personnel in resolving systems or component problems Fabricate parts/wire harness and install per engineering specifications Assist with repairs on components detached from the aircraft, for example, flaps, ailerons, elevators, rudders, doors, and leading edges Assist with complex repairs at on-site and off-site locations Assist with engine removal and installation Assist in development of installations for engineering Assist with fueling/defueling aircraft as required How to thrive in this role? Skills, knowledge & experience: You typically have 1 year aircraft electrical/mechanical experience or 2 years electrical avionics technical school with certificate or equivalent military/vendor training (preferred) You have the ability to read and interpret engineering documents and repair manuals Now that you can see yourself in this role, apply and join the Bombardier family! Bombardier is committed to being an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by applicable federal, state or local law. Job Avionics/Electronics Technician Primary Location Wichita Service/Compltn.Center Organization Learjet Inc Shift Employee Status Regular Requisition 1800 Avionics/Electronics Technician

Resonant Sciences LLC has an immediate opening for an Avionics Engineering Technician to join our Dayton, Ohio team. The position provides an opportunity to join a fast-paced elite team whose primary mission is to support our Nation's War Fighters. The candidate for this position shall be a self-starter who can work independently, unsupervised, and with little guidance. The candidate will have an opportunity to be a member of a world-class team consisting of talented and dedicated engineers, technicians, and professionals who work together to interrupt and challenge the status quo to design and develop state-of-the-art technologies. DUTIES AND RESPONSIBILITIES: We are seeking an Avionics Engineering Technician to plan, design, and test aircraft parts and provide feedback to the manufacturing teams. The selected technician will have responsibility for and should have expertise in the following areas: Ensure compliance with aircraft and missile requirements. Collaborate with other engineers and professionals on developing, producing, testing, and maintaining aircraft. Conduct repairs and installations. Test internal systems and check quality assurance based on understanding of aircraft and computer systems. Analyze new product designs to ensure efficiency and safety. Perform other duties, as assigned. REQUIRED QUALIFICATIONS: Associate's degree in a related field of study, at least 10 years of relevant experience. A higher-level degree may substitute for experience Related experience may be considered in lieu of required education Ability to understand and interpret complex technical schematics, diagrams, blueprints, manuals and/or publications. Instrumentation experience using standard laboratory test equipment, other measurement equipment, hand tools, and power tools. Experience with 3-D CAD software and generating wiring schematics. Basic skills with avionics installation tooling, wiring, wiring repair, and wiring installation. Previous experience in a manufacturing environment. Experience pinning/de-pinning connectors, crimping, and chafe protection. Troubleshooting skills. PREFERRED QUALIFICATIONS: Understanding of soldering techniques and/or J-Std certified. Background in the Aerospace and Defense Industry, NASA, the US Department of Defense or US Military. A&P Certified. Experience with digital or analog circuit analysis. CITIZENSHIP/SECURITY CLEARANCE: U.S. Citizenship required. Ability to obtain and maintain a Secret security clearance required. Active clearance preferred. WHAT’S IN IT FOR YOU? Become part of a high-tech work environment that is highly impactful, exciting, and collaborative. Flexible working environment that enables our employees to balance work and personal life. A comprehensive benefits package that includes medical, dental, vision and prescription benefits with extremely low employee cost share for you and your eligible dependents. A well-funded Health Spending Account with standard account fees paid by Resonant Sciences. 10 Federal Holidays (6 Standard, 4 Floating). A flexible Paid Time Off plan for employees. A generous retirement plan, subject to plan, IRS and ERISA rules. WHO ARE WE? Resonant Sciences is a research and development firm with locations all over the United States, focused on developing and transitioning innovative technologies and solutions to developmental and operational platforms. Our areas of expertise include radome and antenna design and fabrication, custom electronic solutions, and RF measurements of materials, antennas, radomes, and subsystems. Our extensive capabilities include design and analysis, production, and ground and flight testing. A career at Resonant Sciences means that you will be involved in the complete development life cycle, seeing your design evolve from development prototype to incorporating mission requirements to technical specifications into a finished product for field testing. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

*Overview* We are seeking a skilled Avionics Technician to join our dynamic team. The ideal candidate will be responsible for the installation, maintenance, and repair of avionics systems in aircraft. This role requires a strong understanding of electrical systems, adherence to Federal Aviation Regulations, and the ability to work with precision measuring instruments. The Avionics Technician will play a crucial role in ensuring the safety and functionality of aircraft systems. We are an FAA 145 MRO service, and conduct line/hangar/AOG maintenance on the following aircraft, (we will accept candidates with fixed wing experience): Turboprop & Business Jet Platforms. Hawkers, King Airs, Citations, Gulfstreams, and piston popper aircraft. *Responsibilities* * Install, test, and troubleshoot avionics systems and components. * Perform routine maintenance and repairs on electrical systems in accordance with Federal Aviation Regulations. * Operate power tools and precision measuring instruments such as calipers to ensure accurate measurements. * Collaborate with engineering teams to develop solutions for avionics challenges. * Maintain compliance with AS9100 standards throughout all processes. * Document all work performed and maintain accurate records of repairs and modifications. * Assist in the militarization of avionics systems as required. *Qualifications* * 3+ years of experience working as an avionics technician on fixed wing aircraft * business/corporate jet experience is preferred but not required * Experience working in a heavy maintenance environment performing modifications and troubleshooting * Understanding of Federal Aviation Regulations and AS9100 standards. * Excellent problem-solving skills and attention to detail. * Ability to work effectively both independently and as part of a team. * A&P License is not required but will result in a higher hourly rate *Employment Details: * * This is a long-term/permanent position, NOT a short term contract * Compensation: Unlicensed= $30-$34/hr; with an A&P= $34-$39/hr * Tax Free Per Diem is available to those who qualify * Work Schedule: 5/8s (Mon-Fri) 8:00 am – 4:30 pm (at least 10hrs of OT available every week) * Basic tools are required * Onboarding: 10-year background check & employment, FAA/DOT drug screen. * Interviewing: phone or virtual interviews will be requested within 24-48hrs of application submittal. Join us in ensuring the highest standards of safety and performance in aviation technology! Job Type: Full-time Pay: $30.00 - $38.00 per hour Expected hours: 40 – 55 per week Benefits: * Dental insurance * Health insurance * Life insurance * Professional development assistance * Referral program * Relocation assistance * Vision insurance Schedule: * 5x8 * 8 hour shift * Monday to Friday * Overtime Application Question(s): * Do you have a minimum of 3 years of experience working as an Avionics Technician on fixed wing aircraft? * Do you have experience working on business/corporate Jets? (not required) * Do you have an active A&P License? (not required) * Are you able to commute to or relocate to the Dayton, OH area before starting work? (Per Diem is offered to those relocating) * Are you confident in your ability to pass a drug screen and background check? * Are you authorized/eligible to work in the US without VISA Sponsorship? Work Location: In person

LTA Research and Exploration, an aerospace start-up, is seeking an Avionics Technician specializing in systems integration on research and development flight vehicles. In order to help advance our goal of bringing revolutionary airships to life, the Avionics Technician will work directly with the appropriate company personnel to organize, plan, and execute the troubleshooting, installation, and inspections of various subsystems. This position will also provide flight operational support as required. Responsibilities: * Four years’ experience in an avionics/electrical career field or two years of accredited schooling in aviation electronics plus two years of aviation experience. * Performs tasks to include the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. * Without supervision, performs the installation and functional testing of electrical/avionics components and systems per engineering specifications, drawings and maintenance manuals ensuring a defect free system. * Troubleshoots processes/concepts to provide timely, quality repairs of malfunctioning systems. * Demonstrates the skills and knowledge required to effectively and efficiently repair or replace defective components and wiring to ensure installations meet conformity. * Sets up necessary test equipment; conducts functional and operational tests to evaluate performance and reliability. * Ensures that all work performed on the aircraft is properly and completely documented and ready for inspection. * Complies with the company FOD program, tool control program, 6-S program, and all safety regulations. Qualifications: * Minimum 2 years, preferred 5+ years of avionics experience * Maintenance, repair, and troubleshooting experience on electrical wiring harnesses * Previous cockpit avionics retrofit experience * Knowledge of high voltage electrical, ESC, BMS, and batteries * Previous experience managing installation teams * Compliant with all environmental health and safety policies and procedures * Proficient in using tools such as multimeters, crimpers, high voltage testers, calibrated tools, calipers, micrometers, torque wrenches, and other hand tools * Proficient in operating man lifts, scissor lifts, boom lifts, and maintenance platforms * Familiarity with Google Suite (Gmail, Drive, Sheets) and other basic technology * Ability to get DOT driver license Preferred Qualifications: * FAA Inspection Authorization (IA) * Capable of lifting and transporting up to 50 pounds * Capable of sitting or standing for long periods of time * 200 lbs weight limit on the structure for the upper sections of the airship Compliance Requirements: * Background check clearance * Drug Test clearance wherever applicable What We Offer! * Relocation assistance * Excellent medical, dental, and vision insurance through a PPO plan (100% premium paid for individuals, 70% for dependents) * Company-paid life, AD&D, long-term disability, and short-term disability insurance * Parental leave * Generous PTO + 10 paid holidays * 401(k) matching up to 6% * Lunch and snacks provided every day, including accommodations for all dietary restrictions * Monthly wellness stipend * Monthly cell phone stipend * Yearly education stipend to obtain certifications or take classes in your field * Mental health benefit * Fun events, swag, and the occasional airship ride * An opportunity to change the world and work with some of the smartest and the most talented experts from different fields LTA Research & Exploration welcomes all candidates to apply including those with limited experience. We understand that candidates with a growth mindset and passion for working on the next chapter in aviation advancement can outweigh experience alone. We celebrate diverse origins and journeys and understand their importance in developing new technology. Rooted in our humanitarian mission, we want to serve the entire globe and have a team that represents those we wish to serve. _*Lighter Than Air is an equal opportunity employer.*_ _All applicants are considered without regard to race, color, religion, national origin, sex, sexual orientation, gender identity or expression, age, disability, marital status, veteran status or any other discriminatory factors prohibited by law._ Job Type: Full-time Pay: $35.00 - $52.00 per hour Expected hours: No less than 40 per week Benefits: * 401(k) * 401(k) matching * AD&D insurance * Dental insurance * Disability insurance * Health insurance * Paid sick time * Paid time off * Parental leave * Professional development assistance * Relocation assistance * Vision insurance Schedule: * 8 hour shift * Monday to Friday Ability to Commute: * Mountain View, CA 94035 (Required) Ability to Relocate: * Mountain View, CA 94035: Relocate with an employer provided relocation package (Preferred) Work Location: In person

*Job Description*: We are seeking skilled Avionics Technicians to support our clients in the aerospace and defense industries. This role involves installation, troubleshooting, repair, and testing of complex avionics systems across various aircraft platforms. Frequent travel to client sites and hangars nationwide is required. *Responsibilities*: Install, inspect, and repair avionics equipment and systems (e.g., communication, navigation, radar, and flight control systems) Interpret blueprints, wiring diagrams, and technical manuals Perform system checks and functional tests using specialized equipment Diagnose and troubleshoot electronic and electrical malfunctions Document maintenance activities in compliance with FAA regulations Work in coordination with engineers, supervisors, and flight line crews Travel to multiple sites as assigned (travel expenses/per diem provided) *Qualifications*: 2+ years of hands-on experience in avionics maintenance or modification FAA Airframe and/or Powerplant (A&P) certification preferred Experience with commercial, military, or corporate aircraft Ability to read and interpret technical data and wiring schematics Familiarity with FAA regulations and quality standards Must be willing and able to travel frequently (up to 75% travel) Strong communication skills and team-oriented mindset *Preferred Experience*: Experience with aircraft platforms such as Boeing, Gulfstream, Cessna, or military aircraft Previous field service or contract work in avionics Knowledge of troubleshooting tools like oscilloscopes, multimeters, or BITE testers Job Types: Full-time, Contract Pay: $26.78 - $40.00 per hour Schedule: * 10 hour shift * 8 hour shift * Day shift * No weekends Work Location: On the road

*MILITARY VETERANS HIGHLY ENCOURAGED TO APPLY!* We are a distinguished provider of comprehensive business aviation services, including Charter, Maintenance, Repair, & Overhaul, and Fixed Base Operations. With a commitment to excellence, we ensure our clients receive unparalleled service across all divisions. We are looking for team members who want to make a difference and provide an exceptional contribution to our growing organization. We are currently seeking candidates for the position of *Avionics Technician*, at our Dayton, OH location. This position will report to the *Avionics Department Lead/ Avionics Manager.* *Duties and Responsibilities* * Safely perform aircraft scheduled and unscheduled maintenance actions and inspections following applicable technical data in the performance of all aircraft and component maintenance under minimal supervision per the aircraft manufacturer’s specific maintenance program or AAIP. * Coordinate with management, assigned supervision and Inspection to ensure compliance with internal and FAA paperwork, signoffs and quality specifications using the Corridor maintenance program. * Ensure that all inspections are properly conducted, and that the proper inspection records, reports and forms used by the repair station are properly executed prior to releasing the product for return to service. * Follow standard operating procedures assigned from management and as directed by the aircraft manufacturers maintenance manual specifications when using aircraft maintenance tools and equipment such as electrical, hydraulic power and aircraft pressurization carts, aircraft jacks, calibrated tools, etc. * Properly care for and maintain all required maintenance and facility equipment and tools. * Read and understand the Repair Station/Quality Control Manual # PPJR496E and any referenced forms, manuals, or supplements referenced within the listed documents. * Keep current with the latest revisions of all technical data within one’s area of expertise on all articles repaired by the repair station. This data will include manufacturers’ overhaul manuals, service bulletins, part specifications, related FAA approved data and other required technical data used by the repair station * Ensuring the proper handling and preservation of all units/parts while in the work process, installation, and storage. * Ensure the proper tagging and identification of all parts and components as outlined in CFR PPJR496E. * Determine that no defective, unserviceable, or un-airworthy parts are installed in any component or aircraft released by the repair station. * Periodically review, record, and document on-the-job training on form PAT-DAY-0003 as required. Provide documentation to the quality assurance department of all OJT & formal training to be incorporated into repair station personnel files. * Maintaining currency requirements for all special authorizations as required by repair station duties. * Comply with all safety and housekeeping policies. Use personal protective equipment and ensure the aircraft exterior and interior are properly protected (PTP). * Perform other duties as assigned *Benefits:* * Medical, dental, vision, and life insurance * Supplemental life insurance * Short-term and long-term disability * PTO, sick, and company paid holidays * 401k with company match *Qualifications:* * FAA certified Aircraft A&P Mechanic (FAA Certificate Preferred not required) * 5 years experience as an Avionics technician * Must be able to pass a 10-year background check and be assigned to a FAA mandated drug screening program. * Wire harness fabrication and basic troubleshooting experience preferred. * Must be willing to participate in ongoing training and increase technical capabilities. * Must be team oriented, self-driven and safety conscious demonstrating a positive behavior and attitude. * Must be goal-oriented and driven to meet and/or exceed quality maintenance actions and expectations. * Must have problem-solving skills. * Ability to read, write, speak, and understand the English language fluently to meet FAA regulations. * Ability to read and interpret blueprints and engineering documentation. * Ability to use standard aircraft mechanics tools, equipment, and materials in the aircraft maintenance process. * Able to climb ladders and stairs and must be able to work at heights to include from a 20’ ladder or aerial lift. * Perform close tolerance work, work in small spaces, lift objects up to 40 pounds. * Must be computer literate. Knowledge of Corridor Maintenance Program, MS Office programs, especially Outlook, is a plus. Job Type: Full-time Pay: $30.00 - $38.00 per hour Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Life insurance * Paid time off * Referral program * Retirement plan * Tuition reimbursement * Vision insurance Schedule: * 8 hour shift * Day shift * Monday to Friday * Overtime Work Location: In person

Date: Jun 30, 2025 Location: Dallas, TX, US, 75235 Company: Bombardier When applicable, Bombardier promotes flexible and hybrid work policies. Why join us? Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. Bombardier’s Benefits Program With our employees’ well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: Insurance plans Dental, medical, life insurance, disability, and more Competitive base salary Retirement savings plan Employee Assistance Program What are your contributions to the team? Adhere to Bombardier General Work Requirements (Factory, Shop and / or Hangar positions) Comply with environmental health / safety policies and procedures. Participate in 5-S activities. Perform all assigned tasks in a safe and timely manner Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft Perform and document work completed per appropriate manuals and regulations as required Inspect incoming parts and documentation to meet regulatory requirements Assist in other maintenance disciplines – Airframe, Powerplant, Structures, Composites etc. Operate ground support equipment as required Conduct mechanical / electrical removals and installations Return aircraft to service after maintenance at off-site locations Act as shipping and receiving agent for parts Create service orders with SAP Provide time estimates Audit your own location and truck monthly Perform other duties as assigned How to thrive in this role? You have attended Avionics / Electric A/C Technical School or other substantiated equivalent You typically a minimum of 3 years aircraft maintenance work experience or substantiated equivalent experience You typically a minimum of 2 year experience on corporate jet aircraft You typically a minimum of 1 year Bombardier aircraft model experience You have an A Certification, P Certification, A & P Certification or Repairman Certificate You have the ability to interpret and work with mechanical engineering drawings You have the ability to effectively and accurately communicate in both written and verbal form on individual and / or aircraft status with customers at all levels You own Basic set of hand tools with the ability to demonstrate Inventory & control of tools You must be able to work unscheduled overtime including nonscheduled work days and holidays You must be able to work in seasonal/inclement weather outside You Must have the ability to be available for considerable travel with 2 hours’ notice, to include extended assignments lasting up to 30 days. You have inerpersonal skills necessary to establish and maintain effective working relationshipswith assigned employees, other business areas, contractors, and customers You must have a valid drivers’ license and be able to maintain insurable status You are able to work unsupervised and alone You have strong troubleshooting skills You have the ability to obtain appropriate Ground Support Equipment Qualifications as required You possess a valid passport with the ability to travel internationally You have the ability to obtain a Security Identification Display Area badge (SIDA) You have the ability to obtain a Bombardier Corporate Credit Card and stay good in standing of guideline quirements You possess basic PC Skills Previous experience in Customer Relations with emphasis on customer facing interactions” You have experience with aircraft return to service and inspection procedure You possess the ability to train other employees You demonstrate Leadership skills You have strong planning / organization skills Now that you can see yourself in this role, apply and join the Bombardier family! Bombardier is committed to being an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by applicable federal, state or local law. Job Customer Response Team Avionics/Electronics - Base Technician Primary Location Dallas Service Ctr(Love Field) Organization Learjet Inc Shift Employee Status Regular Referral Amount $2,000.00 Requisition 6784 Customer Response Team Avionics/Electronics - Base Technician Nearest Major Market: Dallas Nearest Secondary Market: Fort Worth

Lead Avionics Technician (Second Shift) in GAC St. Louis Unique Skills: This role is on Second Shift (Weekday Evenings). The compensation range for this role is $42.06 - $49.07 per hour. Final compensation for this role will be determined by several factors including but not limited to: minimum and preferred qualifications, knowledge, skills, abilities, education, experience, and location. Gulfstream employees benefit from a total rewards package that includes competitive compensation, comprehensive benefits plans, wellness programs, paid leave and tuition assistance. Our U.S. benefits package includes: Medical, prescription, dental and vision coverage Life and disability insurance Retirement savings plan Employee assistance plan Voluntary programs such as adoption assistance, prepaid legal assistance, home and auto insurance, and accident insurance. Education and Experience Requirements High School Diploma or GED required. 2 years experience on large/mid-size aircraft. 8 years experience in aircraft avionics/electrical career field; or two (2) years of accredited schooling in aviation electronics and six (6) years related experience. FAA A&P license or be able to obtain a repairman certificate within 30 days of start date. FCC license or NCATT certification preferred. Position Purpose: Plans and coordinates all electrical/avionics activities and provides customers with daily information on aircraft schedules, repairs, parts, components shipped to vendors, etc. Works with hangar management to coordinate electrical/avionics activities and schedule aircraft requirements. Job Description Principle Duties and Responsibilities: Essential Functions: Plans, schedules, and completes tasks on work authorizations in order to meet the master schedule. Provides daily status reports and progress schedules to management. . Coordinates efforts of Electrical and Avionics activities to meet aircraft schedules and deadlines. Reviews work, including forms and records, to ensure compliance with Site Inspection Procedures Manual, Site Operating Procedures and FARs. . Supervises and instructs electrical technicians with technical guidance and proper procedures of troubleshooting electrical/avionics systems, routine inspections and preventive maintenance. Provides input to subordinate performance appraisals and submits them to management for review. . Reviews daily job charging for all personnel (including support groups) to ensure accuracy of inputs. . Maintains a preventive maintenance program on test equipment, hand tools, and special tools. Maintains a current knowledge of Aircraft Service Changes (ASC), Customer Bulletins, inspection schedule requirements, vendor information and all other procedures, publications and general knowledge pertaining to aircraft maintenance and servicing. Supervises a continuous safety program in hangar area which includes operation of support equipment, aircraft systems and general housekeeping. Maintains required. logs and records. Enforces the company FOD, tool control, 5-S programs and all safety regulations. . Able to adapt to sudden schedule changes. Coordinates with other disciplines concerning projects. Additional Functions: Establishes and fosters an environment of innovation and Lean oriented thinking. . In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. . Perform other duties as assigned. Other Requirements: Must have thorough knowledge of aircraft systems, troubleshooting, technical manuals systems, and aircraft maintenance records system. Preferred proficiency in the operation and troubleshooting of other aircraft systems or disciplines other than avionics, such as hydraulics, landing gear, flight controls, environmental controls or structural installations and repairs. Ability to read and interpret electrical/avionics system drawings and blueprints. Must have demonstrated leadership ability. Excellent communication skills, both verbal and written. Demonstrated ability to plan, organize, implement and obtain objective with minimal direction. A good understanding of PC, Windows and main frame computer applications including the use of standard computer word processing programs (i.e. Microsoft Word) and appropriate typing skills a plus. Must be able to climb ladders and stairs, work in small-space restricted area, and lift up to 100 pounds. Ability to use hand tools and avionics test equipment. Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 226412 Category: Service Center Percentage of Travel: Up to 25% Shift: Second Employment Type: Full-time Posting End Date: 07/28/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft #LI-AU1

The USMC MQ-9 CLS Technician is a highly qualified and skilled aircraft electronics and Ground Control Station technician with experience in troubleshooting multiple electronics systems both aircraft and control stations. Work may be reviewed by supervisor for general compliance with accepted practices. This position may provide technical guidance to lower-level technicians. Essential Responsibilities: Must maintain assigned UAS aircraft, electrical generators, load banks, starters, relays, batteries, actuators, circuit breakers, switches, and aircraft instruments. Must apply advanced technical knowledge to solve complex problems that typically cannot be solved solely by referencing manufacturers’ manuals or similar documents. Examples of such problems include determining the location and density of circuitry, evaluating electromagnetic radiation, isolating malfunctions, and incorporating engineering changes. Work typically requires an understanding of the interrelationships of circuits, exercising independent judgment in performing such tasks as making circuit analyses, calculating wave forms, and tracing relationships in signal flow, using complex test instruments such as high frequency pulse generators, frequency synthesizers, distortion analyzers, and complex computer control equipment. The CLS technician shall utilize excellent organizational skills in prioritizing workload to meet Daily Flight Schedule. Required to make entries in aircraft logs and records, attend shift change maintenance meetings, perform as a QA, and is responsible for providing guidance and technical expertise to lower-level technicians throughout all aircraft modifications and/or maintenance efforts. Essential Responsibilities: Apply advanced technical knowledge to solve unusually complex problems that affect operational and maintenance capabilities. Requires an advanced understanding of the interrelationships of circuits and associated systems. Exercises independent judgment and leadership in performing assigned tasks in conjunction with designated direction from Production Staff and/or Avionic Leads. Uses common and complex test instruments in the performance of assigned duties. Provides technical and directional leadership guidance to lower-level avionic technicians. Provides training to lower-level avionic technicians. Must be able to sign off work in either NALCOMIS/OOMA or IMDS. Must have knowledge and understanding of CNAFINST 4790.2 and DAFI 21-101. Maintains, repairs, and installs various types of electronic equipment and related devices. Apply advanced technical knowledge of electronics principles in determining malfunctions and applies skill in restoring equipment operations. Must be able to work without direct supervision. Performs all other duties as assigned. Minimum Qualifications: Must have an active Secret US Government clearance with ability to obtain Top-Secret. Note: US Citizenship is required to obtain US Government Clearance. Must have High School Diploma or have completed relevant military and/or vocational technical school curriculum. Minimum of five years of actual Ground Control Station (GCS) maintenance experience required. Minimum of two years’ actual experience on MQ-9 GCS, as an Avionics Technician. Must have advanced knowledge of basic and complex electronics maintenance and repair. Must have advanced knowledge of RFF systems, components, and accessories. Must possess advanced knowledge of technical publications related to aircraft electronics maintenance. Must know theory and principles of operation of engines, accessories and components, theory of flight and electronic flight controls, and have a thorough understanding of electrical and electronic principles. Must be capable of using and reading blueprints, wiring diagrams, and data tables. Must be eligible to gain and maintain one of the following IAT Level II certifications: CCNA Security, CySA+, GICSP, Security+ CE, SSCP, or GSEC, IAW DOD 8570.01-M commensurate with the assigned duties within 90 days of hire or before second deployment. Must be able to inspect and operate ground support and auxiliary equipment. Must achieve a passing grade in all required courses/certifications for continued employment, as needed. Must be able to lift, carry and/or wear Military Issued Equipment in excess of 50 pounds for extended periods. Must be able to speak, read, write, and understand English. Must submit updated SF-86 within 30 days of hire start date. Must have current/active State Issued Driver’s License. Preferred Qualifications: Active Top Secret Clearance with SCI Associate degree in a relevant career field. Current IAT Level II Certification. Prior experience as a Defense Contractor. Avionics Technician experience within the last 10 years. Compensation & Benefits: HIRING HOURLY Rate of Pay: $40.63 (Hourly rate set by SCA) This position includes a competitive benefits package. For more detailed information on our Benefits and what it is like to work for Amentum: please visit our careers site: www.amentumcareers.com #MQ-9 Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

*Maine Aero Services *is seeking a skilled Avionics Technician installer for immediate hire to become part of our Part 145 Repair Station which is located at the Bangor International Airport in Bangor, ME. The successful candidate will become part of our team performing General Aviation maintenance, repair and avionics related projects. The Avionics Technician Candidates must have a minimum of 2 years’ experience in General Aviation Avionics and possess excellent troubleshooting skills in a variety of GA aircrafts. *Responsibilities and Duties* * New Avionics installations – specifically Garmin related modules. Perform avionics maintenance functions such as component removal/installation, wire harness removal/installation, fabrication/repair of wire assemblies, and continuity checks. * Troubleshoot and repair avionics and electrical systems using current applicable data. * Read and interpret avionics schematics and drawings necessary to complete avionics related maintenance tasks. * Ensure aircraft are properly configured and protected prior to performing any power on related task. * Fabricate and install all wiring assemblies and associated avionics equipment. * Follow all applicable instructions for continued airworthiness to accomplish a specific task. * Perform work within estimated hours. * Execute required paperwork in connection with assigned normal duties. * Work with our team of A&P technicians * Pitot/static experience preferred * Airframe and Power Plant certificate a plus * Interface effectively with members of management, other departments, and co-workers *Qualifications and Skills* * High School Diploma or equivalent * A valid clear driver’s license * Excellent computer skills are also required * Working knowledge of Avionics systems and their operation and the proven ability to troubleshoot basic problems * Must be able to pass a FAA regulated drug and alcohol test prior to starting * Three plus years of related work experience working on aircraft avionics systems for a Part 121, 135 or 145 organization *Benefits* * Accrued Vacation and Sick time * Partially funded medical, dental and vision insurance * Short and Long Term Disability * Direct Deposit of bi-weekly payroll * *Pay based on experience* Job Type: Full-time Benefits: * Dental insurance * Health insurance * Life insurance * Paid time off * Vision insurance Schedule: * 8 hour shift * Monday to Friday Work Location: In person

Avionics Technician – Various Shifts Textron Aviation has been inspiring the journey of flight for nine decades through the iconic and beloved Cessna and Beechcraft brands. We are passionate advocates of aviation, empowering people with the freedom of flight. As you join our legacy as a global leader in private aviation, you’ll have opportunities to try new fields, expand your skills and knowledge, stretch your abilities, and build your career. We provide a competitive and extensive total rewards package that includes pay and innovative benefits to support you and your family members – now and in the future, beginning day one. Your success is our success. Description JOB SUMMARY: Performs the tasks of functional testing, troubleshooting, and repairing avionics systems on board the aircraft at a Textron Aviation Service Center. JOB RESPONSIBILITIES: Performs the functional testing required to isolate a customer complaint in a particular avionics system and repairing that aircraft system in accordance with FAA procedures.Based on in-flight analysis and/or evaluation of information received from the customer, diagnoses problems and takes corrective action.Troubleshoots problems to defective units or wiring discrepancies.Replaces defective units, repairs wiring and modifies aircraft as required.As required, accompanies pilot in flight to functional test repaired systems and/or aligned systems.Works from aircraft orders, wiring diagrams, oral and written instructions to perform job duties. Qualifications EDUCATION: High School education or equivalent is required, college or technical school and/or military electronic schools preferred. EXPERIENCE: Minimum 2 years of experience in aircraft avionics system troubleshooting and repair. QUALIFICATIONS: Must be able to obtain and maintain an airport security badge through the local airport authority, if applicable. Airframe and Power Plant Certification preferred. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. This role is eligible for up to a $15,000 (pre-tax) sign-on bonus based on level of experience. Terms & conditions apply. The Company reserves the right to amend or suspend this program at any time. EEO Statement Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of race, color, religion, age, national origin, military status, veteran status, disability, sex (including pregnancy and sexual orientation), genetic information or any other characteristic protected by law. Recruiting Company: Textron Aviation Primary Location: US-Arizona-Mesa Job Function: Flight Operations Schedule: Full-time Job Level: Individual Contributor Job Type: Standard Shift: First Shift Job Posting: 07/01/2025, 1:00:33 PM Job Number: 334266

Overview: The Avionics Mechanic installs and repairs electrical parts, units and components on aircraft. Responsibilities: The Avionics Mechanic installs units, parts, equipment, and components in avionics assembly, according to blueprints and specifications provided Fabricates and assembles prototype equipment for a variety of military aircraft and is familiar with military technical manuals, technical orders, modification work orders and blue prints Coordinates with project engineer personnel throughout the project and provides technical assistance to project engineers Services, repairs and overhauls aircraft to ensure airworthiness Repairs, replaces, and rebuilds aircraft components, such as wiring harnesses, power distribution systems, and functional components including communication/navigation systems, and flight control/aircraft monitoring systems using hand tools, power tools, machines, equipment, soldering irons, and connector installation tools Reads and interprets maintenance manuals, technical manuals, FAA FAR’s and commercial aircraft manuals. Services batteries to keep aircraft in safe operating conditions Installs units, parts, equipment, and components in structural assembly, according to blueprints and specifications, using hand tools and power tools Performs other duties as assigned Qualifications: Education: High School Diploma or GED required Technical or Military School Training preferred Experience: Four years direct experience in avionics maintenance, primarily in the military aviation field or appropriate military occupation specialty training. Any combination of education/experience may be substituted for job requirements at the recommendation of the hiring manager and approval of the COO or higher.

*Job Title:* Avionics Technician – $40/hr. – Contract to Hire *Location:* Little Rock, AR *Job Type:* Full-time | Contract to Hire *Pay:* $40.00 per hour *Veterans Encouraged to Apply* About the Role: We're actively seeking experienced *Avionics Technicians* to support advanced business jet maintenance operations in *Little Rock, AR*. This is a *contract-to-hire opportunity* offering competitive pay, a highly specialized environment, and long-term career potential. You’ll work in a modern, well-equipped facility performing troubleshooting, installation, and repairs on sophisticated avionics systems across a fleet of elite *fixed-wing aircraft*. ✈Responsibilities: * Perform *troubleshooting, testing, installation, and repair* of avionics systems on fixed-wing aircraft. * Diagnose issues with navigation, communication, auto-pilot, and other electronic systems. * Use schematics, wiring diagrams, and manufacturer data to complete assigned tasks accurately and efficiently. * Document maintenance, repair, and testing activities in accordance with FAA regulations and company standards. * Support functional checks, operational tests, and pre-delivery inspections. * Collaborate with airframe and systems technicians to meet project timelines and aircraft delivery standards. Requirements: * *Minimum 4 years of avionics troubleshooting experience* on *fixed-wing aircraft platforms*. * Proficiency in reading and interpreting *wiring diagrams, schematics, and technical manuals*. * Strong understanding of *aircraft electronics systems*, including flight control, navigation, communication, and entertainment systems. * Ability to use multimeters, oscilloscopes, signal generators, and other test equipment. * Must be eligible to work in the United States and able to pass a background and drug screening. Preferred: * Prior military avionics experience highly regarded. * FAA A&P or FCC license a plus (not required). About the Facility: This Little Rock facility is a flagship service center for *high-performance, long-range business jets*. Known for excellence in craftsmanship, avionics, and interior customization, it supports everything from scheduled maintenance to complex electrical system upgrades. The team operates in a *collaborative, veteran-friendly environment*, with opportunities for long-term advancement and specialized training. Why Join? * *$40.00/hour* starting pay * *Contract-to-hire path* with a well-established employer * Work in a *cutting-edge aircraft MRO facility* * *Veteran-friendly workplace* with many transitioning service members already on staff * Be part of a team supporting *world-class business aviation clients* Job Types: Full-time, Contract, Temp-to-hire Pay: $40.00 per hour Benefits: * Dental insurance * Health insurance * Vision insurance Schedule: * 10 hour shift * 4x10 * 5x8 * 8 hour shift * Day shift * Evening shift Work Location: In person

**THIS POSITION IS CONTINGENT UPON CONTRACT AWARD** GENERAL DESCRIPTION: Will perform Field and Sustainment Level maintenance support/augmentation to include: maintenance and repair of aircraft, as well as launch and recovery of aircraft prior to and after the conduct of flight activities. Shall work in specialized shops associated with fixed base operations Field Level maintenance as well as perform troubleshooting and maintenance repairs in support of the Army National Guard AH-64D/E. DUTIES: Applies basic technical knowledge to perform simple or routine tasks following detailed instructions. Performs such tasks as replacing components, wiring circuits, repairing simple electronic equipment. Conducts testing using common instruments such as digital multi-meters, signal generators, semiconductor testers, curve tracers, and oscilloscopes. Required to read blueprints, build wire bundles, install wire bundles, use electronic test equipment, prepare aircraft for flight line inspection, troubleshoot aircraft electronics and determine courses of action for fault isolation/correction. Requires the ability to test instruments and maintain onboard circuitry. Must demonstrate a thorough knowledge of aircraft weapons, weapon systems, and component parts. Perform maintenance, authorized modifications and alignment on aircraft weapons components. Repair, replace, and perform operational and preventive checks and alignments on aircraft flight controls, stabilization systems, avionics and controlled cryptographic equipment. Manages Army Aviation Material Maintenance systems. Other duties as assigned EDUCATION/EXPERIENCE REQUIREMENTS: High school diploma or equivalent GED certificate required. Must have completed an Army 15Y (or X) aircraft armament maintainer's course. Must have a minimum of four (4) years of experience maintaining either the AH-64 or it's weapons systems. FCC GROL preferred Must be a US Citizen Must have or be able to obtain a Secret Clearance. PHYSICAL REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential job functions. Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands, working at heights with fall protection devices. Must be able to crouch, crawl, grasp or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift up to 50 pounds and carry for short distances May be required to read dials/gauges, identify small objects and hand tools. Must be able to see imperfections, micrometer readings and other small scales. Must be able to communicate by voice and detect sound by ear. Must be able to distinguish color and judge three-dimensional depth. May be required to operate power vehicles, machinery, hand tools, ground support equipment, fork lift, APU, etc. EQUAL OPPORTUNITY EMPLOYER / VEVRAA / ADA TNC and its subsidiaries fall under ANCSA and are entitled under Federal Law to extend hiring preferences to its shareholders. ANCSA provides TNC the authority to give shareholder preference in hiring. TNC reaffirms its belief in equal employment opportunity for all employees and applicants for employment. Tyonek is an Equal Opportunity Employer and a VEVRAA Federal Contractor who affords equal employment opportunity to protected veterans and people with disabilities: Tyonek Native Corporation provides all employees and job applicants' equal employment opportunities in hiring and promotion without discrimination because of age, sex, sexual orientation, genetic information, gender identity, marital status, race, religion, color, veteran status, physical or mental disability, national origin, or any other reason prohibited by law. #jsfirm

TAT Technologies Greensboro Facility is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft solutions with over 50 years of experience in the industry. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions. We offer a flexible work environment enabling talented individuals to fulfill their development goals through drive, energy, and passion for the customer. TAT Technologies Greensboro is looking for qualified APU LRU (Line Replacement Unit) Technicians. APU (Auxiliary Power Unit) is a turbine engine utilized on the aircraft to provide electrical and pneumatic power during periods when the main engines are not running. The following is a list of job duties that an APU LRU (Line Replacement Unit) Technician will perform: Essential Job Functions: Responsible for the disassembly, cleaning, analytical inspection, repair schemes, painting, assembly, testing and travelers related to LRUs, components, parts and tools. Responsible for maintaining tooling and test equipment. Read and comply with work instructions. Write technical and accurate reports as needed. Work independently of others as well as teams. Accurately complete work orders, BOMs, data inputs within ERP system. Read and understand Commercial, FAA, EASA, Repair Station, and ISO documentations. Process proper tools. Understand and practice safe and efficient productive use of tools. Mentor and train other personnel. Immediately report to any supervisor any safety, quality or un-ethical actions or conditions they perceive to exist for immediate evaluation and resolution. Operate, maintain and service specialized equipment. Perform other duties as assigned by any supervisor in a professional manner. Requirements High School Diploma/GED minimum. Minimum 2 years of experience preferred. Technical school courses in mechanic or machinist classes preferred. FAA Airframe and/or Powerplant license or equivalent certification preferred. Must be able to pass a respirator fit test and wear a respirator while in our blast room. Basic knowledge of mechanical and metal work required. Computer skills in Microsoft Word, Excel, Outlook, and Quantum preferred. Read and adhere to verbal and written instructions. Make basic decisions and work with deadlines while understanding pressure. Work with people and communicate (both oral and written communication) with other personnel and management effectively. Benefits TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location.

STS Aviation Services is hiring Lead Aircraft Avionics Technicians in Melbourne, Florida. The View From 10,000 Feet: STS Aviation Services is seeking qualified Avionics Lead technicians, to join our overhaul and repair station in Melbourne, FL. These are direct full time positions, and are predominately working on the Airbus A320 and CRJ Aircraft. Qualifications: 4 years minimum experience working as an Avionics Technician, maintaining Commercial and/or large regional aircraft. Comparable military experience is acceptable. 2 years minimum experience, working as a Lead Avionics Technician or Supervisor Valid A&P license is required Must be willing and able to work whatever shift and schedule is required. Must have the ability to obtain an airport license Additional Considerations: Must hold a valid Driver License. Must not be under a doctor’s care with limited work restrictions. Must be able to pass a back ground check and obtain all necessary badging. Must be able to ascend/descend ladders, stairs and work stands unassisted. Must be able to bend, kneel, crawl and stoop frequently in confined spaces. Must be able to lift up to 50 pounds unassisted. Must be willing to work in an environment that is subject to changing climate conditions and moderate noise levels. Must have excellent communication and people skills. Must be able to exercise good judgment in a team environment as well as in aircraft maintenance and safety. Must have problem solving and organizational skills. Must be able to read and understand company and manufacturer manuals. Authorization: All candidates must currently be authorized to work in the United States. Benefit Information: Health Insurance Paid Time Off Holiday Pay 401k program About STS Aviation Services: STS Aviation Services operates four state-of-the-art aircraft hangars, two interior modification facilities and more than 40 line maintenance stations both stateside and aboard. These facilities, and the expert personnel that call each home, fuel the company’s drive to seamlessly blend a growing portfolio of MRO services to deliver all-encompassing aircraft maintenance, engineering and modification solutions to the global aviation industry. To learn more about STS Aviation Services and what makes it the company with “Solutions to Keep You Flying,” please visit www.stsaviationgroup.com or call 1-800-359-4787 ext. 9189 #IndeedAM

Job Responsibilities: • Must know and understand how to read wiring diagrams and manuals. • Must be familiar with avionics troubleshooting, repair, and installations. • Participate and communicate well in customer debrief meetings as requested • Responsible for overall crew performance, productivity, and efficiency. • Must know how to use IFR6000, MPS43B, • Monitor safe work practices, environmental compliance and proper housekeeping • Ensure the aircraft stays on schedule; notify the Avionics Manager and/or Service Manager if issues arise. • Perform advance level troubleshooting and repairs. • Assist Avionics Technicians during installations and troubleshooting. • Assist Avionics Manager in quoting installations and troubleshooting systems. • Provide OJT training to other avionics technicians when needed. • Implement avionics standards, methods, and procedures utilized by Toledo Jet to ensure compliance with the RSM, Operations Specifications, Federal Aviation Regulations, and manufacturers recommendations • Ensure that subordinate avionics personnel are qualified to perform the avionics procedures assigned and the appropriate technical documentation is utilized • Supervise and direct assigned avionics personnel in the accomplishment of safe, on-time, completion of maintenance procedures in a quality fashion • Provide continuity of avionics when shift changes or work assignment changes occur in accordance with established procedures • Ensure that tools, support equipment and facilities are inspected and maintained in a clean and serviceable condition • Make requests or otherwise arrange for Ground Support Equipment and tooling when needed • Assist and/or provide quarterly and annual performance reviews of assigned personnel • Recommend changes to crew staffing levels and skill set requirements to management • Recommends technical training courses for team members based upon needs and abilities • Coordinate and schedule with other departments the expertise needed to complete work projects and packages • Work with outside vendors, internal project management, and other technicians to assist with troubleshooting or resolution of any production related matter. *Knowledge, Skills, and Abilities Required* • Must have 10+ years of avionics experience in general aviation. • Detailed knowledge of avionics systems, pitot-static, RVSM, reading wire diagrams for both installations and troubleshooting aircraft systems. • High School graduate or equivalent • Airframe and Powerplant certificate a plus but not required • Knowledge of Federal Aviation Regulations related to maintenance and procedures • Excellent written and oral communication skills • Detailed working knowledge of Corridor or similar Work Order control system is desired Job Type: Full-time Pay: $35.00 - $45.00 per hour Expected hours: 40 – 50 per week Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Paid time off * Vision insurance Schedule: * 8 hour shift * Monday to Friday Ability to Commute: * Fort Lauderdale, FL 33309 (Preferred) Work Location: In person

We’re a leading name in the aerospace industry, and we’re looking for an experienced Avionics Technician to join our team in Wichita. In this full-time role, you’ll help ensure our aircraft meet the highest standards of safety, performance, and reliability by maintaining and troubleshooting key avionics systems. What You’ll Do: Install, inspect, and troubleshoot communication, navigation, and radar systems. Perform routine maintenance and ensure compliance with FAA standards. Read and interpret technical manuals and blueprints. Work closely with maintenance teams to resolve issues. Accurately document all work performed. Stay current with industry tech and best practices. What You’ll Need: 2+ years of avionics maintenance experience (Part 145 preferred). Strong understanding of avionics systems and diagnostic tools. Ability to read technical documents and follow procedures. High school diploma or equivalent (FAA program preferred). A&P certification a plus. Physically able to lift 50 lbs and work in tight spaces. What We Offer: $35-40/hr competitive pay. Full benefits and 401(k). A forward-thinking team focused on safety and innovation. Ongoing training and career growth opportunities. Don’t miss this opportunity to advance your aviation career - apply now.