Avionics Installation And Maintenance Jobs

Avionics Installer I Location: Savannah, GA Salary: TBD based on experience Contract Duration: 1 Year + Unique Skills: • First Shift Experience/Education: • High School diploma/GED required • General knowledge of applicable regulatory requirements and customer specifications • Must know how to use a multimeter • Entry level position • Six (6) months accredited schooling in aviation electronics or general electrical experience preferred Position Purpose: Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. Essential Duties and Responsibilities: 1. Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings 2. Assists with the completion of tasks within allotted time frame 3. Assists with maintaining required logs and records 4. Complies with the company FOD program, tool control program, 5-S program and all safety regulation 5. Properly care for and maintain shop equipment and tools as assigned by Supervisor Other Requirements: 1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program sponsored by Gulfstream, in area of expertise 2. Ability to read and interpret basic blueprints and schematic diagrams 3. Strong written and verbal skills required 4. Computer skills and general software knowledge necessary To apply please email your resume to Akila at: atadday@cantech.agency AER1

The Avionics Technician installs, inspects, tests, adjusts, or repairs avionics equipment, such as radar, communications, navigation, and missile control systems in assigned aircraft. Performs tasks independently with little or no supervision. Job Duties & Responsibilities: Performs operational checks, bench checks, troubleshoots, and isolates malfunctions in complex aircraft avionics equipment. Uses complex test equipment such as continuous wave and pulse generators, time domain reflectometers, multi-trace oscilloscopes, frequency counters, multi-meters and deviation meters, and specialized test equipment to perform operational checks. Repairs or replaces components based on test results following blueprints, schematics, handbooks, and other technical documents. Performs calibration, repair and replacement of system components based on test results following blueprints, schematics, handbooks, and other technical documents. Practices good housekeeping, tool control, FOD awareness/prevention, and safety at all times. Annotates maintenance actions in aircraft records and is knowledgeable in CAMS documentation. Comply with all current sections of COMNAVAIRFORINST 4790.2 series applicable to aircraft maintenance. Working knowledge of technical publications, NAMP and NALCOMIS aircraft maintenance applications. Must be capable and willing to execute standard aircraft maintenance tasks as part of daily operations. Other or Additional Responsibilities: Perform other job-related duties as may be assigned. Knowledge & Skills: In-depth knowledge of advanced electronic principles and circuit analysis. Ability to trace signal flow, understand interrelationships of circuits, interpret waveforms and voltages. Working knowledge of aircraft communications/navigation and instrument systems. Ability to interpret schematic diagrams, engineering drawings and charts of assigned systems. Excellent soldering and harness/wiring skills, PC board, surface mount and crimping experience. Working knowledge of all standard test equipment and maintenance procedures. Working knowledge of technical orders and maintenance forms. Possess a valid US State driver's license. Ability to read and interpret data is required. Ability to read, write, speak, and understand English. Ability to obtain a government flight line driver’s license. Ability to obtain a secret security clearance. Experience & Education: High School degree or equivalent required. Completion of specialized courses in aircraft structural repair is required. Two (2) to Four (4) years recent experience in the repair of aircraft avionics, com/nav, or instrument systems of the E-2C/D aircraft. Four (4) years preferred. Physical Requirements / Working Environment: May work in Aircraft maintenance hangar or outside. May be required to respond to a wide variety of operational circumstances, including extreme weather conditions and rudimentary infrastructure. May be exposed to extreme noise from turbine and jet engine aircraft. May be exposed to fumes or airborne particles; may be exposed to electrical shock hazards or work near moving mechanical parts, vehicles, or aircraft. Must be able to walk and stand on level and/or inclined surfaces for certain periods throughout the day. Must be able to climb stairs, ramps, ladders, and work stands. Must be able to crouch, crawl, grasp, or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. May be required to lift up to 50 pounds. May be required to see aircraft in flight, read dials/gauges, identify small objects and hand tools. Must be able to see imperfections, micrometer readings and other small scales. Must be able to communicate by voice and detect sound by ear. Must be able to distinguish color and judge three-dimensional depth. May be required to operate power vehicles, machinery, hand tools, ground support equipment, forklift, APU, etc. Travel: May vary by location What We Bring: At V2X we strive to be market competitive in our total reward offerings. The successful candidate’s starting pay will be based on, but not limited to, their job-related skills, experience, qualifications, work location, and market conditions. The salary range provided is intended to display the value of the company’s base pay compensation for locations in the state of Maryland and may be modified at the discretion of the company. Maryland Salary Range: USD $45.39 Union Flex Benefit Credit: USD $3.00/HR Opt-Out Health Credit (must have your own coverage): USD $3.15/HR Other Compensation elements offered: Overtime Premium Pay Differential Pay Provided salary range minimum and maximum values correspond to variances between regional/geographic locations across the United States. Please speak with a recruiter for additional information. Employee benefits include the following: Healthcare coverage Life insurance, AD&D, and disability benefits Retirement plan Wellness programs Paid time off, including holidays and leave of absences Eligible Tuition Reimbursement Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. #LI-MR1 Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

As an Advanced Field Service Engineer (FSE) here at Honeywell, you will provide full time technical support to Boeing Sikorsky Aircraft Support (BSAS). You will be responsible for providing expertise that supports the operation, diagnosis and repair of Avionic Systems. The Advanced FSE must communicate effectively with personnel at all levels and provide timely feedback to enable informed decisions. The Advanced FSE must be able to interface effectively in a team environment by communicating with Honeywell and BSAS logistic support groups. The Advanced FSE may be required to attend meetings or to perform troubleshooting assistance at various locations within the assignment area. The Advanced FSE shall become familiar with applicable avionic maintenance manuals, tech data, and Honeywell processes pertaining to system operation. You will report directly to our Sr Field Service Manager and work 100% at the Client site located at Ft. Campbell, Kentucky. KEY RESPONSIBILITIES Provide expertise that supports the operation and maintenance of Honeywell Avionic systems installed on 160 th SOAR aircraft Provide technical support to BSAS/160 th customer on day-to-day basis pertaining to operational and training issues regarding avionic operation, helicopter interface and Line Replaceable Units (LRU) diagnostics Interface with Customer Support Program Manager, engineering, logistic support groups, and to the End User to make informed decisions for avionic systems operation and maintenance Make decisions on replacement vs. repair for repairable parts when issue is not covered by published technical data Investigate and report technical issues and logistics problems Collect data to support engineering and other program personnel to develop findings, conclusions and recommendations for reported field issues Participate and support on-site technical presentations Assist in the review, data collection and investigation of test results Prepare and present field activity status and summary of outstanding technical issues Support Program Management Review and Technical Coordination Meeting Establish relationship with BSAS/160 th SOAR to ensure a positive Honeywell image Become prime Honeywell contact with BSAS with regards to reliability and maintainability for in-service avionic systems Foster customer satisfaction by maintaining regular contact and timely response to inquiries Due to the nature of this discipline, maybe required to work off-hours, on weekends, and/or holidays, on occasion Must be able to obtain a Secret Security clearance Travel: up to 10% as required and determined by the customer BENEFITS OF WORKING FOR HONEYWELL In addition to a performance-driven salary, cutting-edge work, and developing solutions side-by-side with dedicated experts in their fields, Honeywell employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. For more information visit: https://benefits.honeywell.com/ The application period for the job is estimated to be 30 days from the job posting date; however, this may be shortened or extended depending on business needs and the availability of qualified candidates. U.S. PERSON REQUIREMENTS Due to compliance with U.S. export control laws and regulations, candidate must be a U.S. Person, which is defined as, a U.S. citizen, a U.S. permanent resident, or have protected status in the U.S. under asylum or refugee status.

Duties As an ELECTRONIC INTEGRATED SYSTEMS MECHANIC, WG-2610-12, you will perform operational checks, inspections, tests and troubleshooting on electronic integrated systems composed of a number of sensor subsystems: Integrated Vehicle Health Management System (IVHMS), the Common Missile Warning System (CMWS), the Improved Countermeasure Dispenser System (ICMD), the Night Vision Goggle System (NVG), the Air Data Subsystem, the Attitude Heading Reference System (AHRS) and Doppler/GPS Navigation System (DGNS), Command Instrument Set (CIS) ; a logic subsystem- the Multiplex Data Bus System (MUX), the Multiplex Remote Terminal Units (MRTU), Data Link Terminal Units (DLTU), and Digital Automatic Flight Control System (DAFCS); and actuating subsystems-, and the Digital Automatic Stabilization System (DASS), which includes the Stability Augmentation System (SAS) and Command Augmentation System (CAS) and Hover Augmentation System (HAS). Complete operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU). Complete bench check, testing, repair, inspection, modification, programming, reprogramming, mating, adjusting, alignment, and analyzing of LRUs and shop replaceable units. Recommend methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data, and assists in design changes as necessary. When designated on NGB Flying Status Orders, serve as member of flight crew for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. Guide lower level mechanics in the performance of duties. Processes and accounts for due-in supply assets. Prepare for and participate in various types of readiness evaluations such as Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. Perform other duties as assigned. Requirements Conditions of Employment NATIONAL GUARD MEMBERSHIP IS REQUIRED. If you are not sure you are eligible for military membership, please contact a National Guard recruiter prior to applying for this position. This is an excepted service position that requires membership in a compatible military assignment in the employing state's National Guard, required prior to the effective date of placement. Selectee will be required to wear the military uniform. Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment. Applicants who are not currently a member of the National Guard must be eligible for immediate membership and employment in the National Guard in the military grade listed in this announcement. Males born after 31 December 1959 must be registered for Selective Service. Federal employment suitability as determined by a background investigation. May be required to successfully complete a probationary period. Participation in direct deposit is mandatory. Must complete the U.S. Army Hazmat Certification within six months of employment and complete the required hazmat recertification every two years. Must maintain the position’s mandatory U.S. Army military requirements and continue on-the-job proficiency requirements. Must maintain local network access IAW U.S. Army User Responsibilities and Guidance for Information Systems and Computer Security. Must have a current National Agency Check, Local Agency Checks and Credit (NACLC). For positions requiring a security clearance (Secret or Top Secret) the applicant must possess or be able to obtain a clearance within one year of appointment. Acceptance of a Federal position may terminate Tricare Reserve Select eligibility. Qualifications Military Grades: E-4 through E-7 GENERAL EXPERIENCE: Must have a validated understanding of the basic principles and concepts of the occupational series and grade to include; Skilled in collecting and analyzing data effectively, efficiently, and accurately Ability to communicate clearly and effectively Skilled in duties such as, install, modify, overhaul, maintain, troubleshoot, repair, align, calibrate, and rebuild multi-system avionics complexes Ability to format and write English in reports and presentation formats Skilled in presenting formal training presentations and briefings Skilled in applying procedures and directives by reading and interpreting material Skilled in training, mentoring, leading, and problem-solving SPECIALIZED EXPERIENCE: Must have at least 24 months of skill, knowledge, and abilities in performing electronic integrated systems work activities on Army National Guard helicopters such as, installing, troubleshooting, repairing, modifying, calibrating, aligning, and maintaining these systems. Skilled in performing operational checks, inspections, tests, and troubleshooting on electronic integrated systems composed of a number of sensor subsystems: Integrated Vehicle Health Management System (IVHMS), the Common Missile Warning System (CMWS), the Improved Countermeasure Dispenser System (ICMD), the Night Vision Goggle System (NVG), the ARNG Data Subsystem, the Attitude Heading Reference System (AHRS) and Doppler/GPS Navigation System (DGNS), Command Instrument Set (CIS); a logic subsystem- Multiplex Data Bus System (MUX), the Multiplex Remote Terminal Units (MRTU), Data Link Terminal Units (DLTU), and Digital Automatic Flight Control System (DAFCS); and actuating subsystems-Digital Automatic Stabilization System (DASS), which includes the Stability Augmentation System (SAS) and Command Augmentation System (CAS) and Hover Augmentation System (HAS). Skilled in conducting operational checks, inspections, tests and troubleshooting of Line Replaceable Units (LRU). Experienced in isolating unusual malfunctions using technical manuals, schematics, and wiring diagrams, tools and test equipment including automatic test equipment. Competent in identifying and solving problems system concerns by analyzing installation, circuitry, and operating characteristics of these systems. Skilled in adjusting and aligning sensors, transmitters, amplifiers, power supplies, display devices, controls, actuators, servos, computers and other related components. Have technical expertise in removing faulty LRUs for shop repair. Skilled and knowledgeable in the installation of serviceable components into the aircraft and in performing total systems alignments, in accordance with existing technical manuals and directives. Accomplished in following technical manual compliance and modification of components and systems; and, and skilled in completing systems checks for proper operations. Skilled in maintaining, modifying, calibrating and inspecting a wide variety of user tests, measurements, and diagnostic equipment (TMDE). Skilled in completing bench checks, testing, repairs, inspections, modifications, programming, reprogramming, mating, adjusting, alignments, and analyzing of LRUs and shop replaceable units. Experienced in using a variety of test equipment such as, automatic test equipment (ATE), oscilloscopes, DTA computer, multi-meters, power-meters, and special purpose bench test sets. Competent to test and troubleshoot solid state electronic assemblies and subassemblies such as, circuit cards, modules, rate gyros, electronic control amplifiers, electro-mechanical assemblies, random access memories, programmable read-only memories and various integrated circuits. Capable to certify the operational integrity of various night vision systems, and electro-optical components. Skilled in recognizing methods to improve equipment performance, technical data, and maintenance procedures by reporting hardware and software malfunctions, initiates material deficiency reports both on equipment and in technical data. Experienced in debriefing aircrews to determine the nature of system malfunctions, then documents all maintenance performed and records information related to the system, LRU's, or shop repairable units on both aircraft and historical records. Should have experiences as a flight crew member for the purpose of diagnosing and recording malfunctions, or otherwise determining maintenance and repair requirements. Experienced in providing instructional training to other mechanics in regard to the repair of computer controlled automatic test equipment, line replaceable units and aircraft integrated systems. Experiences included participation in various types of readiness evaluations such as, Operational Readiness Evaluations (ORE), Command Logistics Readiness Inspections (CLRT-X), and Aviation Resource Management Surveys. May have experiences in performing additional duties such as, structural firefighting, aircraft handling, heavy equipment operation, and maintenance of facilities and equipment, or served as a member of a team to cope with natural disasters or civil emergencies. Knowledgeable in safety, fire, security, and housekeeping regulations. OTHER QUALIFICATION REQUIREMENTS To initially qualify and prior to appointment, an applicant's U.S. Army military medical record must indicate a completed and current medical physical, medical profile, a cleared drug test; and, normal color vision as defined by Army Medical Examinations and Standards. To initially qualify and as a condition of continued dual status technician employment, must have the capability to lift, carry, push, or otherwise handle items weighing up to 70 pounds. To initially qualify and as a condition of continued dual status technician employment, must have the physical capability to stand, climb, walk, bend, crouch, reach, and stoop over extended periods of time. To initially qualify and as a condition of continued dual status technician employment, must possess a valid state driver's license to operate government motor vehicles, for the state in which he or she lives or is principally employed, in accordance with U.S. Army and Army National Guard Vehicle Operations Directives. Education Education Requirement: None Additional information If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (Register | Selective Service System : Selective Service System (sss.gov)). MILITARY MEMBERS WITH INCENTIVES: Upon acceptance of a military technician position military members who are currently receiving a military Reenlistment/Extension Bonus (REB), SLRP, or GI Bill-SR Kicker may lose incentive eligibility and may be subject to termination or suspension of incentive (includes indefinite and temporary technicians on assignment for more than 179 days in any continuous 12-month period). Benefits A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. How You Will Be Evaluated You will be evaluated for this job based on how well you meet the qualifications above. Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience. If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration. Benefits A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits. Review our benefits Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. Required Documents As a new or existing federal employee, you and your family may have access to a range of benefits. Your benefits depend on the type of position you have - whether you're a permanent, part-time, temporary or an intermittent employee. You may be eligible for the following benefits, however, check with your agency to make sure you're eligible under their policies. To apply for this position, you must submit a complete Application Package which includes: 1. A COMPLETE RESUME IS REQUIRED. Your full name, address, email address and current telephone number must be on your resume. YOU ARE REQUIRED TO DOCUMENT IN YOUR RESUME EVIDENCE THAT SUPPORTS YOUR ELIGIBILITY AND QUALIFICATION CLAIMS. Your resume must show relevant experience where you worked, job title, duties and accomplishments, employer's name and address, supervisor's name and phone number, starting and end dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week & salary. Incomplete resumes will result in the applicant not being considered for the position. Each applicant must fully substantiate in their own words that they meet 100% of the minimum requirements and specialized experience above in detail; otherwise, the applicant will be considered unqualified for this position. Do not copy and paste from the vacancy announcement or the position description. 2. ALL SUPPORTING DOCUMENTS: Examples include SF50, Diplomas, Official Transcripts, required Certificates/Certifications, Licenses, DD-214s (Member Copy-4), SF-15, VA Disability letter(s), Professional License(s), Official Course Completions (1059), etc. PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resumes, supporting documents, official transcripts (copies) if needed, licenses, SF 50 etc.) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully prior to the announcement closing. Uploaded documents may take up to one hour to clear the virus scan. Human Resources WILL NOT modify, change or add anything to your application packet after the closing date. Incomplete packets will not be considered for the position. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. How to Apply To apply for this position, you must complete the online application/Occupational Questionnaire and submit the documentation specified in the Required Documents section below. To view the Occupational Questionnaire, click the following link: https://apply.usastaffing.gov/ViewQuestionnaire/12757459 A complete application package must be submitted by 11:59 PM (EST) on the closing date of the announcement to receive consideration. To begin, click Apply to access the online application. You will need to be logged into your USAJOBS account to apply. If you do not have a USAJOBS account, you will need to create one before beginning the application. Follow the prompts to select your resume and/or other supporting documents to be included with your application package. You will have the opportunity to upload additional documents to include in your application before it is submitted. Your uploaded documents may take several hours to clear the virus scan process. After acknowledging you have reviewed your application package, complete the Include Personal Information section as you deem appropriate and click to continue with the application process. You will be taken to the online application which you must complete in order to apply for the position. Complete the online application, verify the required documentation is included with your application package, and submit the application. To verify the status of your application, log into your USAJOBS account (https://my.usajobs.gov/Account/Login), all of your applications will appear on the Welcome screen. The Application Status will appear along with the date your application was last updated. For information on what each Application Status means, visit: https://www.usajobs.gov/Help/how-to/application/status/. Agency contact information Melody Stephens Phone 615-313-0654 Email melody.l.stephens.mil@army.mil Address TN ARMY 3041 Sidco Dr Nashville, TN 37204 US Next steps Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application. Fair and Transparent The Federal hiring process is set up to be fair and transparent. Please read the following guidance. Criminal history inquiries Equal Employment Opportunity (EEO) Policy Financial suitability New employee probationary period Privacy Act Reasonable accommodation policy Selective Service Signature and false statements Social security number request Required Documents To apply for this position, you must submit a complete Application Package which includes: 1. A COMPLETE RESUME IS REQUIRED. Your full name, address, email address and current telephone number must be on your resume. YOU ARE REQUIRED TO DOCUMENT IN YOUR RESUME EVIDENCE THAT SUPPORTS YOUR ELIGIBILITY AND QUALIFICATION CLAIMS. Your resume must show relevant experience where you worked, job title, duties and accomplishments, employer's name and address, supervisor's name and phone number, starting and end dates (including Month and Year, e.g., 02/2017, Feb 2017, etc.), hours per week & salary. Incomplete resumes will result in the applicant not being considered for the position. Each applicant must fully substantiate in their own words that they meet 100% of the minimum requirements and specialized experience above in detail; otherwise, the applicant will be considered unqualified for this position. Do not copy and paste from the vacancy announcement or the position description. 2. ALL SUPPORTING DOCUMENTS: Examples include SF50, Diplomas, Official Transcripts, required Certificates/Certifications, Licenses, DD-214s (Member Copy-4), SF-15, VA Disability letter(s), Professional License(s), Official Course Completions (1059), etc. PLEASE NOTE: It is the applicant's responsibility to verify that information entered and/or uploaded, (i.e., resumes, supporting documents, official transcripts (copies) if needed, licenses, SF 50 etc.) is received, accurate, and submitted by the closing date. You may verify your documents have been processed with your application package successfully prior to the announcement closing. Uploaded documents may take up to one hour to clear the virus scan. Human Resources WILL NOT modify, change or add anything to your application packet after the closing date. Incomplete packets will not be considered for the position. If you are relying on your education to meet qualification requirements: Education must be accredited by an accrediting institution recognized by the U.S. Department of Education in order for it to be credited towards qualifications. Therefore, provide only the attendance and/or degrees from schools accredited by accrediting institutions recognized by the U.S. Department of Education. Failure to provide all of the required information as stated in this vacancy announcement may result in an ineligible rating or may affect the overall rating. Help This job is open to The public U.S. Citizens, Nationals or those who owe allegiance to the U.S. National Guard and reserves Current members, those who want to join or transitioning military members. Clarification from the agency Area 1: All Permanent (Tenure 1 OR 2) employees (T32 military technicians/ T5 National Guard employees) with membership in the Tennessee Army National Guard, who meet qualification standards. Area 2: All qualified members of the Tennessee Army National Guard. Area 3: All qualified applicants eligible for membership in the Tennessee Army National Guard.

*Job Overview* We are seeking a skilled Avionics Technician to join our dynamic team. The ideal candidate will be responsible for the installation, maintenance, and repair of avionics systems in various aircraft. This role requires a strong understanding of electrical systems and the ability to work with complex schematics and technical documentation. The Avionics Technician will play a crucial role in ensuring the safety and functionality of aircraft systems. *Responsibilities* * Install, troubleshoot, and repair avionics systems and components in accordance with industry standards and regulations. * Interpret and work from schematics, technical manuals, and other documentation to perform repairs and installations. * Utilize power tools and coordinate measuring machines (CMM) for precise measurements and adjustments. * Conduct regular inspections of avionics equipment to ensure compliance with safety standards. * Collaborate with engineering teams to implement modifications or upgrades to existing avionics systems. * Maintain accurate records of maintenance activities using Computerized Maintenance Management Systems (CMMS). * Perform sheet metal work as needed for the installation or repair of avionics components. * Adhere to all safety protocols while working in a militarized environment. *Skills* * Proficient in the use of power tools and coordinate measuring machines (CMM). * Strong understanding of avionics systems, airframe structures, and related technologies. * Familiarity with CATIA software for design and analysis purposes is preferred. * Ability to read and interpret schematics effectively. * Experience with maintenance practices in a militarized setting is a plus. * Excellent problem-solving skills with attention to detail in all tasks performed. * Strong communication skills to collaborate effectively with team members and other departments. * Applicants with an A&P, Airframe, or Repairmen certificate are preferred. Candidates ideally have experience working within a part 141 repair station and are proficient in the installation and interface of Garmin displays, Nav/Com/GPS, EIS and autopilots. Technicians are required to read and comprehend electrical wiring diagrams and perform mechanical installations on single, multi and turbine aircraft. Join us as we strive for excellence in aviation technology! Job Type: Full-time Pay: $25.00 - $35.00 per hour Benefits: * 401(k) * 401(k) matching * Dental insurance * Health insurance * Life insurance * Paid time off * Tuition reimbursement * Vision insurance Schedule: * 8 hour shift * Day shift * Monday to Friday Work Location: In person

*AI Systems Inc. Job Description* *Job Title: *Avionics Manager *Reporting Relationship: *General Manager / Director of Operations *Status: *Full-Time *Hours: *Monday – Friday, 8AM – 5PM *Department: *Avionics *Job Summary & Purpose: *AI Systems is looking for an Avionics Manager with aspirations to grow as a leader within our business. From troubleshooting a customer's complaint to installing a custom harness, this position calls for a driven individual who is detail-oriented and ready to take charge in a competitive industry. Salaries dependent upon experience. *Essential Functions:* An Avionics Manager's primary functions include, but are not limited to: -Manage a group of 2-3 avionics technicians. - Repair and modify aircraft avionics and electrical components. - Utilize technical knowledge of avionics and electrical systems in troubleshooting practices and corrective measures. -Build aircraft harnesses and instrument panels to specification using engineering documents. - Read and comprehend wire diagrams and schematics. - Communicate and collaborate on plans for various projects. *Minimum Qualifications:* - High School diploma (Required) - 5+ years field experience (Required) - Self-motivated - Critical thinking for problem solving - Ability to follow written/verbal instructions *Physical Demands & Work Environment:* - Physically able to lift up to 100 lbs - Physically able to work in tight and/or uncomfortable spaces - Work hours in excess of 40 hours per week may be required at times. _Note: Nothing in this job description restricts management’s right to assign or reassign duties and responsibilities to this job at any time._ Job Type: Full-time Pay: $70,000.00 - $90,000.00 per year Benefits: * Paid time off * Relocation assistance * Tools provided Schedule: * 8 hour shift * Day shift * Monday to Friday * Overtime Education: * High school or equivalent (Required) Experience: * Avionics: 5 years (Required) Shift availability: * Day Shift (Required) Work Location: In person

Produce high quality products and services for our customers. You will assemble and inspect product to ensure the highest quality product is provided to our customers. You will be responsible for your work area to ensure the safe and efficient operation of the area. You will set up and monitor the production of product in your area and participate in the continuous improvement process at the site to address safety, production and quality improvements. Key Responsibilities Participate in continuous improvement activities. Support the Honeywell Operating System Maintain work area for operation and cleanliness Comply with all safety rules. Record and report production data. Analyze data and production reports Set up and change over equipment This position will support 4th shift: Thursday 10 pm-6 am/ Friday 10 pm - 10 am/ Saturday 10 pm- 10 am /Sunday 10 pm- 6 am

*Avionic/Electrical Systems Mod Installer Technician* VISION MT is a fast-paced and rapidly growing company. We specialize in the manufacture of structural and electrical components to include avionic equipment racks and electrical cable assemblies for use in military and commercial aerospace applications. VISION Manufacturing Technologies distinguishes itself through innovation, a highly skilled workforce and unwavering dedication to customer service and communication. VISION MT offers a comprehensive and competitive benefits package including Medical, Dental, Vision, Life Insurance, Simple IRA with matching, Paid Vacation Days, Paid Sick Time, and Paid Holidays. VISION MT is looking for qualified individuals for avionic/electrical system modifications and installations. *AVIONIC/ELECTRICAL Systems Technician* * *Must *have 3 years aircraft avionics/electrical related experience. * Knowledge of the NAVAIR 01-1A-505-1 Aircraft Electric & Electronic Wiring Installation & Repair Practices Tech Manual is a plus. * Work is performed on the aircraft, hangar deck, flight line or in-house cable lab depending on the task to be completed. * Worker may be required to work in tight spaces, utilize step ladders, lift items weighing up to 50lbs., stand or sit for extended periods of time to perform job tasks. * Work entails, but is not limited to: * Installation of new cables and harness assemblies * Modification or removal of existing systems * Termination of different cable types per referenced prints, schematics and wiring diagrams (EMI Shielded, AEACON, MTL, Coaxial, Twinax, Triax, Quadrax, CAT V, CAT VI) * Installation of different electrical connector types (Pin/Socket Cannon Plugs, RJ45, USB, SMA, BNC) * Fiber Optic Cable Termination experience helpful. * Identify and utilize assorted tools to perform assigned tasks (strippers, crimpers, solder iron, heat gun) * Properly route, clamp and secure harnesses per applicable wiring diagrams * Utilize electrical multi-meter to perform continuity test and checks on cables and harnesses * Must be available to work a standard weekly schedule with overtime as required. * May be required to travel to offsite locations in support of delivery, installations, and modifications. * Follow Safety, Personal Protective Equipment, Tool Control and FOD guidelines. * Salary is negotiable and based upon experience. * Three (3) Professional references required. * Security clearance a plus. *Salary Commensurate with Experience* Job Type: Full-time Pay: $26.00 - $35.00 per hour Benefits: * 401(k) * 401(k) matching * AD&D insurance * Dental insurance * Health insurance * Life insurance * On-the-job training * Paid sick time * Paid time off * Tools provided * Vision insurance Schedule: * 8 hour shift * Day shift * Monday to Friday * Overtime Work Location: In person

Avionics Installer II in GAC Savannah Unique Skills: N/A Education and Experience Requirements High School Diploma or GED required. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience required or, an avionics certificate from an accredited school and (1) year of related work experience. Knowledge of applicable regulatory requirements and customer specifications. Ability to read and interpret basic blueprints and schematic diagrams.. Position Purpose: Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. Job Description Principle Duties and Responsibilities: Essential Functions: Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. Maintains required. logs and records. . Completes tasks within allotted time frame. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. . Checks all work and ensures a defective free assembly prior to final inspection. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. . Maintains a neat and orderly work area. Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. . 2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.) . Perform other duties as assigned. Other Requirements: Strong written and verbal skills required. Computer skills and general software knowledge necessary. Additional Information Requisition Number: 227108 Category: Operations Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 07/11/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Installer Sr in GAC Savannah Unique Skills: Let your career take flight Our aircraft are industry leaders and so are our people. We're looking for talented, motivated individuals who are ready to do innovative work, and we offer exciting career opportunities worldwide. Education and Experience Requirements High School Diploma or GED required. Two (2) years of accredited schooling in aviation electronics and two (2) years related work experience; or four (4) years experience in an avionics/electronic career field. Ability to read and interpret blueprints and schematic diagrams. Position Purpose: Leads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems. Job Description Principle Duties and Responsibilities: Essential Functions: Provides work direction to technicians. Ensures completion of tasks within allotted time frame. Coordinates with and assists other departments to ensure on-time delivery of aircraft. Installs/modifies/fabricates wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. Trains other team members in associated work assignments. Uses ability as a skilled specialist to contribute to the development of employees and techniques. Completes work in innovative and effective ways . Assists Engineering in resolving problems and makes repairs per engineering direction. Maintains required. logs and records. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. . Enforces the company FOD program, tool control program, 5-S program and all safety regulations. Checks all work, including other team members, to ensure a defect free assembly prior to final inspection. Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. . 2. Coordinate shift changes in team leaders absence. . 3. Participate in continuous improvement activities (e.g YIAW, Kaizen events, etc.) . 4. Assists and fills in for team coordinator as required. . Perform other duties as assigned. Other Requirements: Possess a working knowledge of the Gulfstream Policies and Procedures manual, Inspection Procedures manual, and pertinent Process Specifications. Possess the proven ability to move to new tasks with only a minimal, short-term impact to established goal hours and schedule. Strong written and verbal skills required. Computer keyboard skills necessary. Additional Information Requisition Number: 227167 Category: Operations Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 07/10/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. #LI-TORI Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft