Airport Jobs in Savannah, United States of America

Aviation Technology Associates (AVTECH) is looking for a Final Line Mechanic I in Savannah, GA. Shift: First (05:00 to 15:30; other shifts may be available Pay Rate: $25.66 per hour Job Type: Full-time, Contract Contract Duration: 12 months (w/opportunity for extension) Benefits: coverage of up to one-half of employee's medical insurance premium for a base plan eight (8) paid holidays per diem split (if qualified) three (3) sets of uniforms (if applicable) opportunity to become a direct hire after ninety (90) days Experience/Education: High School graduate/GED. One (1) year aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc. A&P license may offset the one (1) year of experience required. Purpose: In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specs, and operational requirements to complete work assigned through final inspection and assure conformance to specifications. Essential Functions and Responsibilities: Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware. Remove and replace linkage, sectors, components, cut and fit system lines and associated hardware necessary to facilitate and perform basic repairs. Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity. Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system. Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness gauges, etc. and tools to successfully complete component and perform minor structure installation. Remove and replace, cut and fit systems lines, panels and structural components and associated hardware necessary to facilitate and perform basic repairs. Update and sign required logs and records as required. Check own work to ensure a defect free installation prior to final inspection. Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations. Demonstrate manufacturing competencies in the employee effectiveness review. Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc. Support continuous improvement processes as assigned. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. Perform other duties as assigned. Other Requirements: Solumina and Smarteam experience preferred. Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. Ability to perform work such as basic drilling, reaming, ship fitting parts, etc. Must be able to climb ladders and stairs, work in small-space restricted areas and lift up to 50 lbs. Must be able to read, write, speak, and understand the English language. By submitting your resume, you are agreeing to have AVTECH submit an application on your behalf to the company we are hiring for. Must be a US citizen or permanent resident.

Final Line Mechanic II in GAC Savannah Unique Skills: First shift, zero travel, Gulfstream experiance requried. Education and Experience Requirements High School Diploma or GED required. 3 years aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc. A&P (FAA Airframe and Powerplant) license preferred. Position Purpose: In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required. tools and appropriate prints, specifications, and operational requirements to complete work assigned through final inspection, and assure conformance to specifications. May assist in instructing or mentoring junior mechanics. Job Description Principle Duties and Responsibilities: Essential Functions: Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware. Remove and replace system components, cut and fit system lines and associated hardware necessary to facilitate and perform repairs. Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity. Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system. Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness guages, etc. and tools to successfully complete component and perform minor structure installation. Assist in troubleshooting mechanical and structural problems to facilitate and perform basic repairs. Update and sign required. logs and records as required. Check own work and may be required. to check work of junior mechanics to ensure a defect free installation prior to final inspection. Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations. Demonstrate Gulfstream Manufacturing competencies in the employee effectiveness review. Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc. Support continuous improvement processes as assigned. . Additional Functions: 1. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. . Perform other duties as assigned. Other Requirements: Must be able to climb ladders and stairs, work in small-space restricted areas and lift up to 50 lbs. Solumina and Smarteam experience preferred. Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required. to do the job. Must be skilled in close tolerance work and have knowledge of use of special tools and ability to perform close tolerance work such as drilling, reaming, ship fitting parts, etc. Ability to operate hydraulic mule pumps, fixtures, and jigs. Additional Information Requisition Number: 227055 Category: Operations Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 07/11/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

_*JOB DESCRIPTION – *_ Reason: Replacements, will be in assembly/pain shop Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems *Principle Duties and Responsibilities:* * Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. * Assists with the completion of tasks within allotted time frame. * Assists with maintaining required logs and records. * Complies with the company FOD program, tool control program, 5-S program and all safety regulations. * Properly care for and maintain shop equipment and tools as assigned by Supervisor. _*MINIMUM REQUIREMENTS FOR CONSIDERATION*_ * High School Diploma or GED required. * Wants to see longevity on resume! Want folks who will stick around * General knowledge of applicable regulatory requirements and customer specifications. * Must know how to use a multimeter. * Entry level position. Six (6) months accredited schooling in aviation electronics or general electrical experience preferred. * Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program sponsored by Gulfstream, in area of expertise. * Ability to read and interpret basic blueprints and schematic diagrams. * Strong written and verbal skills required. * Computer skills and general software knowledge necessary. Job Type: Full-time Pay: $25.66 per hour Schedule: * 10 hour shift * 8 hour shift * Monday to Friday * Weekends as needed Work Location: In person

RS Acft Compo Repair Tech Sr (TR Shop) in GAC Savannah Unique Skills: 1st Shift, No Program, 25% Travel Full understanding of aircraft AMM, CMM and associated drawings; A&P with heavy structures experience on Thrust Reverser's preferred. Education and Experience Requirements High School Diploma or GED required. A&P license, FCC license, or NCATT cert preferred.. Able to read & interpret blueprints, eng docs, CMP data, CBs and ASCs. Proficient in operation of all tools & equip in dept. Basic understanding of shop math. 6 years experience in one of the following or related exp: Sheetmetal and/or hydraulic overhaul. Avionics/elect compo repair, accredited schooling in electronics and elec sys may offset some exp reqmts. APU removal, install, and service. Position Purpose: Working with a high degree of independence, provide leadership and technical guidance while performing the repair and overhaul of internal and external aircraft assemblies, subassemblies and components in accordance with GAC Repair Station requirements. Job Description Principle Duties and Responsibilities: Essential Functions: Mastery of advanced skills, procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Duties and tasks reflect substantial variety and complexity. Showing superior technical skill and competence, perform, instruct, and oversee repair of mech and elect assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, eng dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. Set up and operate necessary test equipment in accordance with required. doc to perform functional and operational tests of mech and elect acft components for return to service or for initial cert for new products. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. Showing superior tech skill, remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. Demonstrate mastery of repair techniques and concepts using acceptable practices including troubleshooting, soldering and application of protective coatings. Demonstrate expertise in use, maintenance, and calibration requirements of precision measuring and inspect tools. Maintain and utilize all required. paperwork in accordance with FAA Repair Station requirements. Mastery of shop material and component flow through via work orders in accordance with Repair Station requirements. Comply with all company and legislative environmental health and safety regs. Additional Functions: Lay-out, remove, fabricate and/or install major and minor repairs to flight controls and other secondary structure components using honeycomb core sandwich construction techniques, composite repair techniques, test bench procedures, hydraulic press procedures, and servicing carts. . Fabricate and repair sheetmetal and associated mech parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mech means. . Remove & install APUs and perform all required. APU maintenance for ALL GAC acft models. . Provide tech support to Customer Support Coordinators and Tech Services. . Perform complex troublehshooting and subsequent repairs to electronic assemblies and subassemblies by removing and replacing circuit components, either through hole or surface mount, using acceptable soldering and circuit repair techniques. . Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . Perform, in conjunction with QC Reps, mass weight and balance on repaired flight controls using blueprints and required. FAA Repair Station forms. . Assist with training Acft Component Repair Techs. . Perform other duties as assigned. Additional Information Requisition Number: 227235 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 07/31/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Installer I Location: Savannah, GA Salary: TBD based on experience Contract Duration: 1 Year + Unique Skills: • First Shift Experience/Education: • High School diploma/GED required • General knowledge of applicable regulatory requirements and customer specifications • Must know how to use a multimeter • Entry level position • Six (6) months accredited schooling in aviation electronics or general electrical experience preferred Position Purpose: Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. Essential Duties and Responsibilities: 1. Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings 2. Assists with the completion of tasks within allotted time frame 3. Assists with maintaining required logs and records 4. Complies with the company FOD program, tool control program, 5-S program and all safety regulation 5. Properly care for and maintain shop equipment and tools as assigned by Supervisor Other Requirements: 1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program sponsored by Gulfstream, in area of expertise 2. Ability to read and interpret basic blueprints and schematic diagrams 3. Strong written and verbal skills required 4. Computer skills and general software knowledge necessary To apply please email your resume to Akila at: atadday@cantech.agency AER1

Sr Inspector A&P in GAC Savannah Unique Skills: 4th Shift. Working knowledge of repair station policies and procedures. Must be able to lift 50 lbs. Must be able to work from heights to include ladders, stands, and lifts. Must be able to work in confined spaces occasionally. Education and Experience Requirements High School Diploma or GED required. 8 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 2 years of relevant Gulfstream aircraft experience and 2 years of aircraft inspection experience. A&P (FAA Airframe and Powerplant) license required. Position Purpose: Performs inspections of aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed. Works as an integral part of the Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/CAA requirements. Job Description Principle Duties and Responsibilities: Essential Functions: Responsible for Quality Control inspections on aircraft/components . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting . Keeps accurate, neat and legible records of the work performed on aircraft/components . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service . Ensures aircraft/components are airworthy prior to any flight activities . Mentors technicians on effective documentation . Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules . Provides technical support to inspection personnel in supporting the FAA and/or CAA documented requirements . Perform other duties as assigned. Other Requirements: Strong computer skills. Knowledge of inspection and maintenance procedures for various aircraft models and systems. Knowledge of pertinent technical reference materials. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Working knowledge and application of Quality Assurance and/or Quality Control systems and methodologies. Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 227178 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: Weekend Days Employment Type: Full-time Posting End Date: 09/25/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Inspector A&P in GAC Savannah Unique Skills: 4th Shift. A&P license required. Must have understanding and functional knowledge of repair station policies and procedures. Flight Safety Initials on large cabin aircraft is a plus. Good organizational skills. Must be able to lift 50 lbs, work from heights such as ladders, stands, and lifts. Must be able to work in confined spaces occasionally. Education and Experience Requirements High School Diploma or GED required. 6 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Position Purpose: Performs inspections of aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality, and that aircraft are returned to service in an airworthy condition with all required. documentation properly completed and filed. Works as an integral part of the Quality Control/Assurance team assuring aircraft/components are in compliance to FAA/CAA requirements. Job Description Principle Duties and Responsibilities: Essential Functions: Responsible for Quality Control inspections on aircraft/components . Completes inspections of aircraft, engine, and component repairs and alterations to ensure conformity to FAA approved/acceptable data . Coordinates mechanical, electrical and inspection requirements on the aircraft during maintenance or outfitting . Keeps accurate, neat and legible records of the work performed on aircraft/components . Coordinates throughout assigned jobs with RTS to ensure accurate aircraft records are produced in a timely manner . Conducts audits of maintenance documentation for accuracy and completion on all aircraft prior to approval for return to service . Ensures aircraft/components are airworthy prior to any flight activities . Mentors technicians on effective documentation . Additional Functions: Communicates with management as required. to identify work assignments and delivery schedules . Provides technical support to inspection personnel in supporting the FAA and/or CAA documented requirements . Perform other duties as assigned. Other Requirements: Strong computer skills. Proficient in blueprint reading and interpretation, shop mathematics and QC Procedures. Working knowledge and application of Quality Assurance and/or Quality Control systems and methodologies. Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 227010 Category: Quality Assurance Percentage of Travel: Up to 25% Shift: Weekend Days Employment Type: Full-time Posting End Date: 09/18/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

High School Diploma or GED required. Entry level position. Six (6) months accredited schooling in aviation electronics or general electrical experience preferred. (2 years for level 2 and 4 years for senior role) General knowledge of applicable regulatory requirements and customer specifications. Must know how to use a multimeter. Position Purpose: Under moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. Principle Duties and Responsibilities: Essential Functions: 1. Assists in installations, modifications and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, and engineering drawings. . 2. Assists with the completion of tasks within allotted time frame. . 3. Assists with maintaining required logs and records. . 4. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. . Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. . Perform other duties as assigned. Other Requirements: 1. Technical Certificate in aircraft electrical assembly preferred and/or successful completion in current year youth apprenticeship program sponsored by Gulfstream, in area of expertise.. 2. Ability to read and interpret basic blueprints and schematic diagrams.. 3. Strong written and verbal skills required.. 4. Computer skills and general software knowledge necessary.. 5. Must be able to read, write, speak, and understand the English language. Job Types: Full-time, Contract, Temporary Pay: $25.66 - $32.19 per hour Benefits: * Dental insurance * Life insurance * Vision insurance Schedule: * 10 hour shift * Monday to Friday Application Question(s): * What is your email address? * Gulfstream requires a unique identifier with the submission of your resume. Please submit the month and day of your birthday/and last 3 of your ssn as your unique identifier. If you do not feel comfortable submitting your last 3 of your ssn, you may use any 3 numbers of your choice. Example of the unique identifier- 04/10/745 Work Location: In person

JOB TITLE: Aircraft Final Line Mechanic I LOCATION: Savvanah, GA PAY RATE: $25.65/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Perform aircraft modifications and maintenance independently, including removal and installation of airframes, engines, landing gear, electrical components, and control systems. Ensure compliance with procedures, performance standards, and test specifications. Lead and provide direction to assigned technicians, promoting high standards of quality. Act as Mechanical Team Lead (MTL) when assigned or in their absence. Coordinate with Inspection to ensure FAA and internal compliance and proper documentation. Operate and oversee use of ground support and special equipment. Assist in training new employees on tools, manuals, and systems. Collaborate across departments for overhaul or repair of customer property. Maintain and track parts, labor, and documentation in the material tracking system. Support Lean and 6S initiatives for efficient and safe work environments. Participate in aircraft certification and final phase testing as needed. Ensure secure handling and proper tagging of customer property and components. Requirements: High School Diploma or GED required. Minimum of 3 years of aerospace/aviation experience or equivalent mechanical experience (e.g., auto mechanics, heavy equipment maintenance). Experience with precision fitting and mechanical assembly preferred. FAA Airframe and Powerplant (A&P) license preferred, but not required. Ability to read and interpret blueprints, engineering drawings, and schematic diagrams. Skilled in close tolerance work (e.g., drilling, reaming, precision fitting). Proficient in the use of specialized tools including permaswage pumps, dies, gauges, and hydraulic mule pumps. Able to install, adjust, and rig mechanical systems such as control cables, landing gear, doors, and engines. Ability to perform basic troubleshooting on mechanical and structural systems. Familiarity with Solumina and SmarTeam preferred. Knowledge of manufacturing documentation and processes (e.g., MIR sheets, DMTs, PCOs). Must be able to climb ladders and stairs, work in confined spaces, and lift up to 50 lbs. Ability to work in a team-oriented environment and support 5S/FOD initiatives. Responsible for quality and accuracy of work performed. May be required to assist in mentoring junior mechanics and reviewing their work. Will be expected to maintain clean work areas and adhere to all safety and compliance protocols. May support aircraft certification and final phase testing, including flight testing as needed. Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights—apply today! #jobad

*Field Technician * *Salary range : 60k - 85k/year* *Location: Savannah,GA* *Industry : Aerospace* *Job Description :* *Key Accountabilities:* * Comply with work scope instructions as directed by our Maintenance Operations Control * Disassemble, clean, re-assemble and repair engines and modules * Must be able to obtain and maintain repair station inspection approvals * Ability to lift up to approximately 50 pounds and pass a required eye exam * Use troubleshooting logic to identify defects in component or parts and access / use engine data materials such as AMM, EMM, IPC, etc. * Understand; interpret and apply Service Bulletins, FAA Advisory Directives and Technical Variances when applicable *Basic Requirements:* * High School Diploma or GED (General Educational Development) with 3+ years of aircraft maintenance, repair, and/or overhaul experience, OR * Associates Degree with 2+ years of aircraft maintenance, repair, and/or overhaul * FAA Airframe & Power Plant License * This position is a FAA designated safety-sensitive position. Selected candidate must successfully complete a FAA/DOT pre-employment background check, a FAA/DOT drug screen that tests for the presence of Marijuana, Cocaine, Opiates, Phencyclidine and Amphetamines (or metabolites of those drugs) and comply with FAA-mandated rules on drug and alcohol use. *Preferred Requirements:* * Prior Gas turbine engine experience * Customer relations experience * Engine or Aircraft logbook familiarity * Prior FAR145 repair station experience * Understanding of basic to intermediate Microsoft Word and Excel functionality Pride Global and its affiliates - including Russell Tobin, Pride Health, and Pride Now - offer eligible employees comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), a 401(k)-retirement savings, life & disability insurance, an employee assistance program, identity theft protection, legal support, auto and home insurance, pet insurance, and employee discounts with some preferred vendors. #COE-EN-PN Job Type: Full-time Pay: $60,000.00 - $85,000.00 per year Schedule: * 10 hour shift Ability to Commute: * Savannah, GA 31405 (Required) Ability to Relocate: * Savannah, GA 31405: Relocate before starting work (Required) Work Location: In person

RS Aircraft Technician II Location: Savannah, GA Salary: $32.19 US/hr – based on experience Contract Duration: 1 Year + Unique Skills: • Candidates must be able to work any shift as assigned by the Manager. Shift is not guaranteed Experience/Education: • High school diploma or GED required • FAA Airframe and Powerplant certificate and 2 years of aviation maintenance experience, or 4 years of aviation maintenance experience to include 2 years of experience working on mid/large-size aircraft required • Valid Drivers’ license required Position Purpose: Under minimal supervision, performs inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems and structures. Essential Duties and Responsibilities: 1. Communicate as required to receive and understand work assignments. Perform complex aircraft inspections, repairs, and modifications with minimal supervision 2. Coordinate with MTL, STM, and the Inspection Department to ensure compliance with internal and FAA inspection and documentation requirements. Properly complete CMP cards, work order sign-offs, and other paperwork in a timely and accurate manner. Assist as needed with shift turnovers 3. Ensure that all work accomplished meets quality standards and specifications 4. Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely 5. Follow standard operating procedures when operating ground support equipment (external power carts, hydraulic mules, hydraulic lift platforms, tow tugs, forklifts, compressed gas cylinders, etc.) 6. Coordinate, accomplish, and assist with aircraft movement in hangar and ramp areas 7. Provide training to less experienced technicians 8. Protect customer property (PTP) 9. Properly collect and dispose of waste fuel, oil, hydraulic fluids, de-icing fluids, and solvent rags. Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean and uncluttered 10. Implement and apply Lean/continuous improvement processes to all areas of responsibility 11. Properly use and maintain company-provided tools and equipment. Return items to designated storage area after use 12. Comply with safety rules and procedures. Use protective equipment as required and be alert for unsafe conditions. Address unsafe conditions before putting people or property at risk 13. Use the material tracking system to create parts demand, track squawks, and sign-offs, and to charge labor to correct work orders 14. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required Other Requirements: 1. Working knowledge of the FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures 2. Must be able to read, write, speak, and understand the English language. To apply please email your resume to Akila at: atadday@cantech.agency AER1

Structural Mechanic I - Special Missions in GAC Savannah Unique Skills: see job description Education and Experience Requirements High School Diploma or GED required. 1 year related structural assembly experience. Experience working with Solumina and Smarteam preferred.. One year experience credit considered for graduates of Savannah Tech Aircraft Structures Technical Certificate Program. Position Purpose: In a team oriented work environment, under moderate supervision, performs a variety of structural assembly operations in a production department. Job Description Principle Duties and Responsibilities: Essential Functions: Perform assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensures parts/assembly meet FAA requirements, customer specifications, and Gulfstream standard of quality . Rivet structural assemblies and parts, including sheetmetal parts, using all tools required. to do the job (e.g. portable riveting guns, pneumatic guns, pneumatic drills, counter sinks, rivet shavers, files, reamers, rivets) . Read work orders, blueprints, lofts, sketches, and operation sheets to determine sequence of operations, type size and hole pattern for rivets. Check all work and ensure a defective free assembly prior to final inspection . Maintain and use all logs and records (e.g. MIR sheets, DMTs, Crabs, PCOs). Use resource planning system to enter daily labor against correct Work Order and Item numbers . Align and assemble parts to be riveted using jigs, holding fixtures, pins, clamps, and fasteners . Maintain a neat and orderly work area, supports the company 5S Program and complies with all safety regulations . Work under moderate supervision on duties and tasks . Support Lean Activities . Additional Functions: Participate in continuous improvement activities (e.g. YIAW, Kaizen events, etc.) . Keep shop and aircraft work areas clean and uncluttered . Properly care for and maintain shop equipment and tools as assigned by Supervisor . Comply with safety rules and procedures . Perform other duties as assigned. Other Requirements: Basic knowledge of various aircraft structures, sheetmetal, and fabrication processes. Ability to read and interpret basic blueprints. Read and interpret 6" scale. Basic computer skills. Must be able to read a scale and perform basic shop math. Read and comprehend basic documents and instructions. Must have essential personal skills, which include an aptitude for hands-on craftwork, a professional attitude, attention to detail, ability to work with people and to meet demanding schedules. Must demonstrate good housekeeping and safety practices. Ability to work with composite resins and materials. Must be able to lift 50 lbs. Must be able to work any shift. Must be able to climb ladders/stands/stairs and work in small spaces and/or restricted areas. Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 227254 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 09/01/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

AMT Team Lead A&P (Weekend Days) in GAC Savannah Unique Skills: Minimum of 4 years of Repair/Overhaul operations on Honeywell Business Aviation Auxiliary Powerplant Units (APU) to include disassembly, inspection, assembly, and testing requirements Honeywell OEM APU formal training preferred Experience in FAA 145 Repair Station Regulatory requirements Education and Experience Requirements High School Diploma or GED required. 10 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 4 years of relevant Gulfstream aircraft experience. A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Plan and coordinate various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Provide work directions to technicians performing aircraft maintenance and troubleshooting and repair duties. Job Description Principle Duties and Responsibilities: Essential Functions: Ensure required. maintenance and necessary servicing of all aircraft mechanical systems . Lead the repair, maintenance, installation, and troubleshooting of mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems . Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements . Ensure completion of work order sign-offs, shift turnovers, and other paperwork in a timely manner . Ensure that all work accomplished meets quality standards and specifications . Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . Follow standard operating procedures and JSAs when operating ground support equipment . Operate and oversee use of special support equipment used in removal and installations of major components . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . Properly use and maintain company-provided tools and equipment . Coordinate movement of aircraft, as required. . Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 227153 Category: Service Center Percentage of Travel: Up to 25% Shift: Weekend Days Employment Type: Full-time Posting End Date: 07/31/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

AMT V A&P in GAC Savannah Unique Skills: Flight Test experience preferred. Leadership experience required. Education and Experience Requirements High School Diploma or GED required. 8 years aviation maintenance experience (avionics, electrical, and/or mechanical) to include 4 years of relevant Gulfstream aircraft experience. A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Demonstrate expertise in aircraft maintenance and perform troubleshooting and repair duties requiring a high degree of accuracy and skill. Job Description Principle Duties and Responsibilities: Essential Functions: Perform required. maintenance and necessary servicing of all aircraft mechanical systems . Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems . Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements . Properly complete work order sign-offs, shift turnovers, and other paper work in a timely manner . Ensure that all work accomplished meets quality standards and specifications . Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . Follow standard operating procedures and JSAs when operating ground support equipment . Operate and oversee use of special support equipment used in removal and installations of major components . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . Properly use and maintain company-provided tools and equipment . Act on behalf of Lead, as needed . Coordinate movement of aircraft, as required. . Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 227159 Category: Service Center Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 07/04/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Avionics Installer II in GAC Savannah Unique Skills: N/A Education and Experience Requirements High School Diploma or GED required. Two (2) years of accredited schooling in aviation electronics or two (2) years related work experience required or, an avionics certificate from an accredited school and (1) year of related work experience. Knowledge of applicable regulatory requirements and customer specifications. Ability to read and interpret basic blueprints and schematic diagrams.. Position Purpose: Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. Job Description Principle Duties and Responsibilities: Essential Functions: Assists in installations, modifications, and the fabrication of wiring and electrical components, fixtures, and associated equipment in accordance with blueprints, worksheets, engineering drawings. Maintains required. logs and records. . Completes tasks within allotted time frame. Ensures that work accomplished meets applicable regulatory requirements and customer specifications. . Checks all work and ensures a defective free assembly prior to final inspection. Complies with the company FOD program, tool control program, 5-S program and all safety regulations. . Maintains a neat and orderly work area. Additional Functions: 1. Properly care for and maintain shop equipment and tools as assigned by Supervisor. . 2. Participates in continuous improvement activities (e.g YIAW, Kaizen events, etc.) . Perform other duties as assigned. Other Requirements: Strong written and verbal skills required. Computer skills and general software knowledge necessary. Additional Information Requisition Number: 227108 Category: Operations Percentage of Travel: None Shift: First Employment Type: Full-time Posting End Date: 07/11/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

RS AMT III A&P (APU Repair and Overhaul) in GAC Savannah Unique Skills: Honeywell APU experience a plus Education and Experience Requirements High School Diploma or GED required. 3 years aviation maintenance experience (avionics, electrical, and/or mechanical). A&P (FAA Airframe and Powerplant) license required. Valid Driver’s License required. Position Purpose: Perform various technical functions of aircraft maintenance, repair, replacement, and modification of key aircraft components to ensure proper operation. Perform aircraft maintenance and perform troubleshooting and repair duties requiring accuracy and skill. Job Description Principle Duties and Responsibilities: Essential Functions: Perform required. maintenance and necessary servicing of all aircraft mechanical systems . Repair, maintain, install, and troubleshoot mechanical and functional components of the aircraft including airframes, engine components, landing gear, electrical components, and control systems . Coordinate with inspection to ensure compliance with internal and FAA inspection and documentation requirements . Properly complete work order sign-offs, shift turnovers, and other paperwork in a timely manner . Ensure that all work accomplished meets quality standards and specifications . Properly identify (tag) customer property and equipment. Store aircraft components and other customer property securely and safely . Follow standard operating procedures and JSAs when operating ground support equipment . Operate and oversee use of special support equipment used in removal and installations of major components . Coordinate with other departments to arrange for the overhaul or repair of customer property as needed . Additional Functions: Apply 6S and Lean Initiatives to keep shops, hangars, and aircraft work areas clean . Properly use and maintain company-provided tools and equipment . Coordinate movement of aircraft, as required. . Maintain advanced knowledge of FAA regulations, process specifications, Repair Station and Quality Control manuals, and company policies and procedures . Perform other duties as assigned. Other Requirements: Advanced knowledge of inspection and maintenance procedures for various aircraft models and systems. Advanced knowledge of pertinent technical reference materials (maintenance manuals, IPCs, Service Bulletins, structural repair manuals, engineering drawings, ADS, etc.). Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 227246 Category: Service Center Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 07/31/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

The Aviation Maintenance Supervisor (Army Rotary Wing) is responsible for the supervision of organizational level maintenance on assigned aircraft. Manage all aspects of aircraft maintenance and ensure all work is scheduled and performed in a safe and efficient manner. Supervise maintenance staff, which includes reviewing employee performance, addressing personnel issues, generating assignments, and setting priorities Perform scheduled/unscheduled maintenance, servicing, launch and recovery, corrosion control, and inspection, and routine thorough complex maintenance of aircraft, aircraft sub- systems, and components, as required. Perform engineering work orders regarding modifications and/or upgrades to various aircraft systems. Read and interpret manufacturers’ and company’s maintenance manuals, service bulletins, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Adjust, repair, or replace electrical wiring system and aircraft accessories, as required. Provide guidance and instruction to team members concerning technical orders, checklists, and hazardous materials. Responsible for maintaining equipment maintenance schedules on all company assets and monitoring parts and supply inventories. Ensure availability of materials, anticipating requirements and reordering. Offer technical guidance to Engineering staff regarding start-up of new equipment and follow-up of maintenance programs. Provide employees with proper training on company equipment as required by OSHA Regulations and monitors annual training requirements. May supervise and assist in aircraft/equipment movement. May conduct flight line and hangar foreign object damage prevention walks and housekeeping. May meet with Customers and Company Senior Leadership as required Perform other qualified duties as assigned. Minimum Requirements High School Education or equivalent. Ten (10) years of aviation maintenance experience, with Three (3) years of US Army aviation maintenance experience. Five (5) years of supervisory experience with two (2) years of Army aviation maintenance supervisory experience. Working knowledge of OSHA and company requirements. Knowledge of safe working techniques and procedures. Must be able to obtain and maintain a US Government Security Clearance, NAC-I T1 Public Trust. ** US Citizenship is required to obtain a T1/CAC NACI Clearance. Preferred Requirements Ability to plan and schedule maintenance work requirements and to direct skilled technicians in the daily performance of their duties. Excellent communication, organizational, time management, and interpersonal skills. Effective leadership and interpersonal skills with an ability to supervise a team. Competent in the use of a computer, to include Microsoft Office Suite, especially Word, Outlook, and Excel. Valid driver’s license. In-depth knowledge of flight line operations, aircraft/vehicle movement, and safety/hazards. Advanced knowledge of aircraft common and special tools and test equipment, aircraft technical orders/job guides/publications and schematic diagrams, drawings, charts and technical publications, aircraft engine, landing gear, and flight control systems. Previous experience with Microsoft Office – Word, Excel, Project, PowerPoint-Required. Physical Requirements/Working Environment Must be able to walk or stand on level and/or inclined surfaces up to three (3) hours per day and sit for up to five (5) hours per day. May be required to lift up to 30 lbs. to the height of 4 feet and up to 20 lbs. to a height of 7 feet. May be required to carry, push or pull up to 50 pounds. On occasion must be able to lift up to 80 pounds. Must be able to crouch, crawl, grasp, or handle objects, use finger dexterity, bend elbow/knee and reach above/below shoulders. Must be able to routinely climb / descend stairs. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Aviation Technology Associates (AVTECH) is looking for a Final Line Mechanic II in Savannah, GA. Shift: Second (15:00 to 01:30); other shifts may be available Pay Rate: $28.75 per hour Job Type: Full-time, Contract Contract Duration: 12 months (w/opportunity for extension) Benefits: coverage of up to one-half of employee's medical insurance premium for a base plan eight (8) paid holidays per diem split (if qualified) three (3) sets of uniforms (if applicable) opportunity to become a direct hire after ninety (90) days Experience/Education: High School graduate/GED. Airframe and Power Plant License preferred. Three (3) years aerospace/aviation experience or equivalent mechanical experience such as auto mechanics, heavy equipment, etc. Purpose: In a team oriented work environment, install parts and components, lines, cables, etc. in area assigned using required tools and appropriate prints, specifications, and operational requirements to complete work assigned through final inspection, and assure conformance to specifications. May assist in instructing or mentoring junior mechanics. Essential Functions and Responsibilities: Assemble, install, and adjust aircraft structure parts and system components. Rig control cables, sectors, linkages, control surfaces, landing gear and doors, engines, cowls, aircraft entry doors and associated parts and hardware. Remove and replace system components, cut and fit system lines and associated hardware necessary to facilitate and perform repairs. Responsible for quality and efficiency of all installations; ensure all parts/assembly meet requirements. Perform necessary rework to ensure installations meet conformity. Install systems lines, valves, ducts and associated parts and hardware. Work to ensure a leak free system. Use a variety of tools and equipment, including permaswage pumps, dies, line cutting tools, wrenches, checking tools, witness guages, etc. and tools to successfully complete component and perform minor structure installation. Assist in troubleshooting mechanical and structural problems to facilitate and perform basic repairs. Update and sign required logs and records as required. Check own work and may be required to check work of junior mechanics to ensure a defect free installation prior to final inspection. Maintain a neat and orderly work area, support the company FOD and 5S programs and comply with all safety regulations. Demonstrate Manufacturing competencies in the employee effectiveness review. Maintain and use all logs and records such as MIR sheets, DMTs, Crabs, PCOs, etc. Support continuous improvement processes as assigned. In support of aircraft certification and final phase testing, may include flight tests on aircraft as required. Perform other duties as assigned. Other Requirements: Must be able to climb ladders and stairs, work in small-space restricted areas and lift up to 50 lbs. Solumina and Smarteam experience preferred. Requires ability to read and interpret basic blueprints and schematic diagrams and use all tools required to do the job. Must be skilled in close tolerance work and have knowledge of use of special tools and ability to perform close tolerance work such as drilling, reaming, ship fitting parts, etc. Ability to operate hydraulic mule pumps, fixtures, and jigs. Must be able to read, write, speak, and understand the English language. By submitting your resume, you are agreeing to have AVTECH submit an application on your behalf to the company we are hiring for. Must be a US citizen or permanent resident.

RS Acft Compo Repair Tech II (Machinist / 4th Shift) in GAC Savannah Unique Skills: This is a Machine shop Position, Must have experience in CNC and/or Conventional milling and /or lathe. A good understanding of basic shop practices. Experience in using precision measuring instruments for checking machined parts. Education and Experience Requirements High School Diploma or GED required. Able to interpret blueprints, engrg docs and use precision measuring tools. Proficient operation of all tools/equip in the dept incl glass bead & carboblast machines. Must possess basic understanding of shop math. 2 years experience in one of the following or other related experience: Sheetmetal, hydraulic overhaul, electrical/electronic harness buildup, electrical systems troubleshooting, battery servicing, APU removal, installation, and servicing. Position Purpose: Under moderate supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Gulfstream Repair Station requirements. Job Description Principle Duties and Responsibilities: Essential Functions: Apply basic and some advance skills in procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. Perform repairs of mechanical and electrical assemblies and subassemblies through removals, repair or replacement of defective parts and/or fabrication of replacement parts, and installations in accordance with blueprints, component maintenance manuals, vendor documents, verbal instructions, engineering dispositions, and other authorized maintenance data. All activities to be in accordance with Repair Station requirements ensuring all parts and assemblies meet conformance. Set up, maintain, and operate necessary test equipment in accordance with required. documentation to perform functional and operational tests of mechanical and electrical aircraft components for return to service. Inspect all detail parts using blueprints, component and/or overhaul manuals and other required. maintenance data to ensure conformity requirements are met. Remove skins and related components on flight controls and secondary structure components, locate and install/reinstall parts. Demonstrate effective repair techniques using acceptable practices including troubleshooting, soldering and application of protective coatings. Maintain and utilize all required. paperwork in accordance with FAA RS requirements. Maintain a clean and orderly work area. Comply with all company and legislative environmental health and safety regulations. Additional Functions: Lays-out, removes, fabricates and/or installs major and minor repairs to flight controls and other secondary structure components(I.E: honeycomb core sandwich construction techniques, composite repair techniques, test bench operations, hydraulic press operations, servicing carts) . Fabricate and repair sheetmetal and associated mechanical parts, components and/or equipment by rolling, shrinking, stretching, braking, riveting or other mechanical means. . Remove & install APUs and perform all required. APU maintenance for ALL Gulfstream aircraft models. . Fabricate and repair wiring and electrical assemblies and harnesses utilizing acceptable repair and fabrication processes including splicing, soldering, and pinning of wires. . Utilize training and tools to effectively troubleshoot complex electrical circuits and or systems during component repair process. . Assist with training and instructing of Acft Component Repair I Techs. . Resolves routine questions and problems, referring the more complex issues to higher levels. . Perform other duties as assigned. Additional Information Requisition Number: 226320 Category: Service Center Percentage of Travel: Up to 25% Shift: Weekend Days Employment Type: Full-time Posting End Date: 07/31/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft