Military Aviation Support Jobs

Summary: The F-16 Weapons Technician is responsible for the Oversight/Training/Instruction of inspections, maintenance, and repair of weapons systems and associated equipment on the F-16 aircraft, loading ordnance, and configuring load outs for each flight. Oversight/Training/Instructions for the following duties and responsibilities: Administers/monitors weapons loading standardization training and evaluation programs. Documents/maintains qualification/certification status per the company training and certification requirements. Weapons load crew duties, as required, in support of training exercises, inspections, etc. Monitors flightline munitions/explosive handling and loading operations, if applicable. Monitors load crews during operations Maintains current awareness and training of proper weapons storage and security, if applicable. Armament systems maintenance/loading/flight operations, as applicable. Installation/removal of alternate mission equipment (AME) and normally-installed equipment, as needed, and weapons OPS checks. One-time inspections (OTI); Time Compliance Tech Orders (TCTO); and maintains/inspects tools and equipment. May be asked to perform End-of-Runway (EOR) inspections, if needed. Troubleshooting and repairs to assigned aircraft as directed. Read and interpret schematics, engineering drawings, and other technical directives. Ensure the work accomplished on any aircraft or component is in compliance Complete and certify work reports for all work accomplished on the aircraft. Follow company procedures as per the maintenance operations manual using safe work practices. Ability to work independently and to carry out assignments to completion within parameters of instructions given prescribed routines, and standard accepted practices. Requirements: Job Requirements: High school diploma or GED required Associate degree strongly preferred, Bachelor's Degree or equivalent a plus A minimum of 8-10 years of direct F-16 Weapons/Armament Maintenance experience and training on F-16 aircraft. USAF 7 – Level skill or equivalent Work Conditions: Position is located OCONUS and in an austere environment; work is being performed on the flight line, limited hangar or aviation field environment. Physical Requirements: • Must be able to lift and parts, tooling and other awkward items sometimes weighing greater than 50 lbs, including up and down stairs. • Requires intermittent standing, walking, sitting, squatting, stretching, and bending throughout the workday. • Must be able to see and hear, or use prosthetics that will enable these senses to function adequately to assure that the requirements of this position can be fully met. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Major Job Activities Key Responsibilities: - Train, advise, assist, and integrate IqAF maintenance personnel on APG systems including propulsion, hydraulics, and airframe components. - Perform and supervise scheduled and unscheduled maintenance tasks to ensure safe and mission-ready aircraft. - Use and instruct IqAF in proper use of technical data, schematics, and maintenance documentation. - Conduct engine runs, operational checks, and system troubleshooting on the flightline. - Document maintenance actions accurately in accordance with approved systems and procedures. - Recommend process improvements and assist in normalizing IqAF APG operations. - Support additional duties and team integration as directed by Site Leadership. Material & Equipment Directly Used Flightline support equipment, hand tools, diagnostic systems, propulsion system test tools, technical manuals, Microsoft Office Suite. Working Environment Flightline and maintenance hangar setting in a deployed environment; exposure to extreme temperatures and aircraft operations. Physical Activities Lifting, bending, standing, and working in confined spaces; exposure to noise, fumes, and high-pressure systems. Qualifications Education: High school diploma or equivalent required. Technical school training preferred. Certifications: USAF 7-skill level (Craftsman) in Airframe, Propulsion, or APG systems preferred. Experience: 8 to 10 years of relevant experience in this specialty field. Other Requirements: U.S. Citizenship; eligible for Secret clearance; capable of worldwide deployment including the Middle East; prior international maintenance support experience preferred. Skills and Technology Used: Maintenance documentation systems, technical order interpretation, propulsion diagnostics, Microsoft Office. Contingent Upon Contract Award. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Summary The F-16 Engine Mechanic is responsible for Oversight/Training/Instructing the host nation on the inspection, maintenance, and repair of F-16 aircraft engines, with a strong focus on ensuring the engine’s optimal performance, reliability, and safety. This role requires in-depth knowledge of turbine engines, especially Pratt & Whitney or General Electric engines commonly used in F-16 aircraft. Working in close collaboration with other maintenance team members, the technician oversees both routine and complex tasks, diagnosing issues and implementing repairs that meet strict military and safety standards. Attention to detail, adherence to technical manuals, and commitment to quality assurance are critical to success in this role. Essential Duties and Responsibilities for Oversight/Training/Instructing host nation in the following: • Routine and non-routine inspections of F-16 aircraft engines, identifying issues or areas requiring attention. • Scheduled maintenance, including troubleshooting, removing, and installing engine components. • Utilizing advanced diagnostic equipment to assess engine conditions and analyze engine performance. • Repairing and replacing worn or damaged components, such as turbine blades, bearings, and seals, ensuring compliance with technical specifications. • Maintaining detailed records of work performed, including inspection and maintenance logs, and report findings to ensure accurate documentation. • Adhering to all safety protocols and technical manuals during maintenance procedures to ensure personnel safety and equipment functionality. • Collaborating with other technicians and engineers to discuss solutions for complex mechanical or technical issues. • Staying up-to-date on F-16 engine technologies, tools, and best practices by participating in ongoing training and professional development. • Supporting pre- and post-flight engine checks, ensuring engine readiness and addressing last-minute maintenance needs. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. • Must be able to obtain and maintain a US Secret security clearance. • In order to obtain a secret clearance, qualified candidates must have US Citizenship. • Ability to pass physical screening requirements Education and/or Experience • High school diploma or equivalent; an Associate’s or technical degree in aircraft maintenance or a related field is preferred. • Minimum of 8-10 years of experience working with military turbine engines, ideally on F-16 engines. • Extensive hands-on experience with Pratt & Whitney or General Electric engines for the F-16 aircraft. • Proficiency in using diagnostic tools, maintenance software, and technical manuals for turbine engines. • Ability to work in a fast-paced environment, meet deadlines, and adapt to changing priorities. • Strong understanding of safety standards and procedures for working with military aircraft. • Certification through a relevant military or civilian aviation authority (e.g., FAA, A&P) is highly desirable. • USAF 7 – Level skill or equivalent Work Conditions Position is located OCONUS and in an austere environment; work is being performed on the flight line, limited hangar or aviation field environment. Physical Requirements • Must be able to lift and parts, tooling and other awkward items sometimes weighing greater than 50 lbs, including up and down stairs. • Requires intermittent standing, walking, sitting, squatting, stretching, and bending throughout the workday. • Must be able to see and hear, or use prosthetics that will enable these senses to function adequately to assure that the requirements of this position can be fully met. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job ID: 696496BR Date posted: Jul. 03, 2025 Description: Join the Lockheed Martin Aeronautics Field Sustainment (AFS) team at Nellis Air Force Base, Nevada as an F-22 Aircraft Modification Technical Lead. You will be responsible for providing critical planning and execution of F-22 Depot-level modifications and Time Compliance Technical Orders (TCTO). What You Will Be Doing -Candidate will be the intermediary between the technicians, CFT Site Lead, and customer while assisting technicians with day-to-day activities. -Will be skilled in aircraft electrical systems and aircraft wiring maintenance. -Will be able to complete jobs in maintenance data collection systems, adhere to all technical orders, fault isolation manuals, ground operating procedures and local operational instructions. -Perform troubleshooting on systems and components on the aircraft as required. -Responsible for all maintenance performed on the assigned aircraft. -Responsible for providing status of work accomplished to CFT Lead and customer -Assist with product discipline, housekeeping, HAZMAT accountability, Tool & FOD controls, and use of personal protective equipment (PPE) -Must be able to work and communicate well both orally and written in a team environment as this position involves significant and continued interface with customer and personnel at all levels. Must read, write and speak English fluently. -Documented qualifications in related maintenance fields. -Regularly required to lift/carry up to 50 pounds, perform repetitive movements, and perform work from ground level to overhead. -This position requires frequent standing for long periods, walking, stooping, kneeling, squatting, crawling, and twisting. -Must be a United States citizen. Must possess at minimum an Interim Secret Clearance prior to starting and must be able to obtain a Final Secret Security Clearance. Who You Are You recognize and respect the diverse cultures and communication styles within the organization, adapting your approach to foster understanding and cooperation. You embrace change and are skilled at leading initiatives that require adaptation, helping teams navigate transitions smoothly and effectively. You excel in a fast-paced environment, effectively managing multiple priorities and maintaining focus under tight deadlines. What's In It For You: From onsite to remote, we offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin's comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. aeroafs #OneLMHotJobs aerosystems Basic Qualifications: The following Basic Qualifications are skills that a candidate must possess to be considered for this position: -Minimum 6 years experience with F-22 aircraft maintenance and modification activities -Experienced in F-22 Avionics or Electrical and Environmental specialties -Experience reading and interpreting blueprints and schematics, workbooks -Experience with USAF products and processes to include F-22 hardware and maintenance, technical orders and technical drawings, at the organizational and intermediate levels Desired Skills: The following Desired Skills are not required but are those skills that would set a candidate apart from the other candidates: -Experience operating autonomously with minimal direction from management -Experience in process development and continuous improvement -Experience managing the production of weekly status reports, metrics, incorporation documents, and schedules. -Experience interpreting and executing policies and procedures that typically affect aircraft maintenance and modification activities as related to US services. -Familiarity with F-22 system such as Service-Flo, FIN, JEDI, DIMS & writing AR's. -Excellent verbal and written communication skills. Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: Non- standard 40 hour work week as assigned by leader Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Experienced Professional Business Unit: AERONAUTICS COMPANY Relocation Available: Possible Career Area: Technicians Type: Full-Time Shift: First