Aviation Maintenance And Repair Jobs

At Surf Air Mobility, we're transforming air mobility. As innovators in aviation, we are at the forefront of creating a more efficient and accessible flying experience. With our commitment to a customer-first approach, advanced software solutions, and electrification, we’re pioneering new ways for people to travel, making flying not only faster but more enjoyable. Our passionate team thrives in a collaborative environment where innovation and hard work go hand in hand. Help us shape the future of aviation while working with cutting-edge technologies that are changing the lives of our passengers. This is an in-office position at our Dallas Headquarters in Addison, Texas, and includes a $10,000 signing bonus payable in two installments! JOB DESCRIPTION: MAINTENANCE CONTROLLER A& P FLSA STAUS: NON-EXEMPT REPORT TO: MANAGER OF MAINTENANCE CONTROL The Maintenance Controller is responsible for coordinating scheduled and unscheduled maintenance of aircraft. This is an office position (non-remote). The incumbent will be required to relocate within a reasonable commuting distance to Dallas. TX HQ. Various shifts are available. Training will be provided for the right candidate. Key Duties Ensure safety, compliance, and operational excellence. Manage off-site maintenance and scheduling for maintenance events involving Company aircraft. Update the maintenance tracking system whenever a deferral is opened, closed, and or updated. Ensure planned and unplanned maintenance for MEL’s are performed within the deadline of MEL’s and in accordance with the Company and OEM manuals. Provide troubleshooting advice as required to Company and contract/vendor personnel. Update the aircraft times, cycles, dates, etc. daily in the maintenance tracking system for each aircraft, engine, and propeller. Provide the group and Company personnel with a daily overview of all aircraft technical status, open defects and short-term maintenance events (30 days or less). Answer phones and emails while on duty to coordinate maintenance events with maintenance providers. Keep GOC/SOCC informed of aircraft status. Audit approved maintenance providers per the GMM and assist in maintaining authorized vendor data base. Verify documents prior to release of an aircraft from maintenance. Track unscheduled maintenance events per the CASS program. Coordinate technical publications in support of approved vendors. Ensure material requirements for any defects made when stockroom personnel or parts purchasing personnel are gone for the day is ordered and tracking numbers provided. Work with other departments as required (i.e., line maintenance, base maintenance, maintenance planning, quality, RII inspectors, records, etc.). Prioritize equipment repair needs. Assist with training other Maintenance Controllers as needed. Perform other duties as assigned by the Supervisor of Maintenance Control and/or the DOM. REQUIREMENTS FOR THIS POSITION: High school diploma or equivalent. Minimum age of 21 years old. FAA Airframe & Powerplant certificate. Valid driver’s license and reliable transportation. Experience with Microsoft Word and Excel. Ability to proficiently read, write, and speak English. Must be available and flexible to work variable shifts including weekends and holidays. Must be authorized to work in the U.S per the Immigration Act of 1986. Must pass 10-year background check and pre-employment drug screen per airline and/or company regulations. Preferred Prior maintenance control experience. Physical requirements: General office duties. Benefits: Competitive Salary: Attractive compensation package based on experience. Health & Wellness: After 30 days of employment on the 1st of the next month, you are eligible to sign up for medical, dental, and vision insurance, air ambulance coverage, short-term disability, pet insurance, health savings accounts, and company-paid life insurance. Retirement Plans: Employees can enroll in our company’s 401(k) plan. Generous PTO: After completion of your probationary period, employees earn 1 day of PTO per month, plus paid holidays throughout the calendar year. Employee Discounts: After completion of your probationary period, you can access the My ID Travel program, which allows members of your immediate family to participate as well. This program provides travel privileges, including: Flight tickets at significant discount, employee and family members can fly our planes (standby space available) Discounts on hotels and resorts Car rentals at reduced rates Discounted cruises Addison Office Amenities include: full free on site gym, two indoor pickleball courts, game tables in lobby, on-site day care through Kinder Care, on-site coffee shop, on-site café, free underground parking, easy access to Tollway and George Bush, and great location near restaurants in Addison. This job description is not an exclusive or exhaustive list of all job functions that an employee in this position may be asked to perform from time to time. At Surf Air Mobility, we are committed to building a more inclusive ecosystem that integrates women, people of color, and other underrepresented groups into the cleantech sector and aerospace industry. We strongly encourage applications from qualified applicants and members of underrepresented groups. Surf Air Mobility is an Equal Opportunity Employer; employment with Surf Air Mobility is governed based on merit, competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. Surf Air Mobility participates in E-Verify.

RS Structural Mechanic V in GAC Brunswick Unique Skills: Special missions experience required. Heavy aircraft structural modifications experience required. Education and Experience Requirements High School Diploma or GED required. 8 years aviation sheet-metal and/or fabrication experience to include at least 1 year of aerospace heavy structures modification such as Special Missions. Valid Driver’s License required. Position Purpose: The Special Missions Structural Mech V is a technical expert that works with a high degree of accuracy and timeliness under minimal supervision to safely fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations. Mentor and train others. Job Description Principle Duties and Responsibilities: Essential Functions: Use complicated schematics/blueprints, engineering drawings and technical instructions to safely perform sheetmetal layout, fabrication, and installation of parts, equipment or fabricated items on aircraft. Coordinate with supervision and Inspection to ensure compliance with internal and FAA paperwork, sign-offs and quality specifications . Mentor and train as required. Review their work prior to sign off to ensure work complies with quality control standards . Use blueprints to cut and form plastics and follow standard operating procedures when using adhesives, sealants and solvents . Utilizing tools as required. to shape and form complex angles and configurations according to blueprint specifications or written/verbal information . Safely operate shop equipment such as: brakes, presses, riveting equipment, shears, and hand tools associated with sheetmetal functions. Use the proper hardware for various sheetmetal applications . Comply with all safety, 5S, and housekeeping policies. Uses personal protective equipment as required. Ensures aircraft is protected (PTP) . Conduct monthly 5S audits, as required. Use the material tracking system to create parts demand, track squawks and to sign-off work . Assist in developing initiatives to meet individual OGSM requirements, as required. Assist management, as required. with supervision and instruction of technicians in proper procedures and techniques . Perform other duties as assigned. Other Requirements: FAA A&P license or be able to obtain a repairman certificate within 30 days of start date. Advanced knowledge of sheetmetal and fabrication processes (forming, drilling, stamping, shaping, bending, punching, cutting, riveting, filing and dimpling). Ability to read and interpret blueprints and engineering documentation. Valid drivers license required. to operate towing and other Gulfstream transportation equipment. Demonstrates excellent communication skills, both verbal and written. Adapts to sudden schedule changes. Able to use tools and equipment associated with sheetmetal work. Able to climb ladders and stairs, work in small restricted areas, lift up to 40 pounds and work any shift. Must have a good working knowledge of computers and experience working with MicroSoft Office suite. Must be able to read, write, speak, and understand the English language. Additional Information Requisition Number: 225902 Category: Operations Percentage of Travel: Up to 25% Shift: First Employment Type: Full-time Posting End Date: 07/31/2025 Equal Opportunity Employer / Individuals with Disabilities / Protected Veterans Gulfstream does not provide work visa sponsorship for this position, unless the applicant is a currently sponsored Gulfstream employee. Legal Information | Site Utilities | Contacts | Sitemap Copyright © 2025 Gulfstream Aerospace Corporation. All Rights Reserved. A General Dynamics Company. Gulfstream Aerospace Corporation, a wholly-owned subsidiary of General Dynamics (NYSE: GD), designs, develops, manufactures, markets, services and supports the world's most technologically-advanced business jet aircraft

Purpose and Scope: The Aircraft Survival Flight Equipment Technician manages, performs, and schedules inspections, maintenance, and adjustments of assigned aircrew flight equipment (AFE), associated supplies, and inventories assets. Essential Responsibilities: Inspects, maintains, packs and adjusts aircrew flight equipment such as flight helmets, oxygens masks, parachutes, flotation devices, survival kits, helmet mounted devices, aircrew night vision and other ocular systems, anti-G garments, aircrew eye and respiratory protective equipment, chemical biological protective oxygen masks and coveralls, and other types of AFE and aircrew chemical defense systems. Repairs fabric and rubber components, including protective clothing, thermal radiation barriers, flotation equipment, and various parachutes. Evaluates problems and determines feasibility of repair or replacement related to inspecting and repairing fabric, rubber equipment, and parachutes. Evaluates work orders for fabrication of authorized items. Operational and circuit checks for emergency signaling and communication devices such as survival radios and beacons. Housekeeping of all areas of work including shop; participate in FOD program. Minimum Position Knowledge, Skills and Abilities Required: High School diploma or equivalent. Minimum two (2) years of actual and recent O or I level H-60S/R/F/H Aircraft Maintenance experience is required or equivalent rotary aircraft experience. Requires knowledge of mechanical and electrical repair and maintenance procedures, pyrotechnic and explosive devices, and aircraft egress systems. Detailed knowledge of the operation and characteristics of aircraft survival flight equipment and the ability to demonstrate and explain proper usage and operation of the equipment. Good oral and written communication skills; working knowledge of word-processing and integrated software applications; organizational skills and ability to perform detail-oriented work are required. Must be able to obtain and maintain a Common Access Card (CAC) or Rapid Gate Pass. Knowledge and use of special tools/equipment required to perform assigned maintenance tasks is mandatory. Must have a valid Driver’s License. Must be able to meet physical requirements associated with and pass any medical examination requirements related to performing daily assigned tasks. Preferred Qualifications: Prior experience with U.S. Naval repair maintenance operations on military aircraft highly preferred. Work Environment, Physical Demands, and Mental Demands: While performing the duties of this job, the employee is frequently exposed to moving mechanical parts. The employee is occasionally exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles, toxic or caustic chemicals; outside weather conditions; extreme cold; extreme heat; risk and risk of electrical shock. The noise level in the work environment is usually moderate. The employee is frequently required to walk: use hands to finger, handle, or feel: reach with hands and arms: talk or hear: and taste or smell. Requires climbing on ladders, scaffolding, and platforms: standing, bending, and working in cramped areas: lifting and carrying tools and equipment which occasionally may weigh over 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, and the ability to adjust focus. Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status , or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

*Job Title:* Aviation Structures Mechanic – $45/hr. – Contract to Hire *Location:* Little Rock, AR *Job Type:* Full-time | Contract to Hire *Pay:* $45.00 per hour *Tools Required:* None ✈About the Role: We are seeking highly skilled *Aviation Structures Mechanics* to join a leading aircraft service facility in *Little Rock, Arkansas*, supporting the maintenance and structural integrity of world-class business jets. This is a *contract-to-hire opportunity* with competitive pay and the chance to transition into a full-time role with long-term growth potential. Responsibilities: * Perform advanced *structural repairs, replacements, and fabrication* on corporate aircraft. * Carry out *riveting* and sheet metal work with high precision and in accordance with aircraft maintenance manuals and FAA standards. * Interpret technical drawings, blueprints, and engineering documentation. * Work in a *heavy maintenance environment*—including major inspections and modifications. * Follow all safety procedures, regulatory requirements, and internal quality standards. * Collaborate with other maintenance professionals to meet project deadlines and performance targets. Requirements: * *Minimum 5 years of aviation riveting experience*. * Strong background in *structural repairs, part replacements, and metal fabrication*. * Experience working in a *heavy maintenance (MRO) environment* on fixed-wing aircraft. * Ability to read and interpret technical blueprints and engineering documentation. * Must be authorized to work in the U.S. * High attention to detail and ability to work efficiently under tight deadlines. Preferred Experience: * Previous experience on *business jets* or *Falcon*-class aircraft is a plus. About the Facility: This facility is one of the premier completion and maintenance centers in the U.S. for *high-performance, long-range business jets*. The team supports a full range of maintenance, repair, and overhaul (MRO) services, from airframe and avionics to cabin interior refurbishments and structural work. The facility offers a modern, well-equipped workspace, working on some of the most advanced private aircraft in the industry. Tools: * *No tools required*—all equipment is provided on-site. Why Apply? * Top pay at *$45.00/hr.* * Opportunity for *contract-to-hire* * Work in a *state-of-the-art hangar* * Be part of a *highly specialized team* supporting elite business aviation clients Job Types: Full-time, Contract, Temp-to-hire Pay: $45.00 per hour Benefits: * Dental insurance * Health insurance * Vision insurance Schedule: * 10 hour shift * 4x10 * 5x8 * 8 hour shift * Day shift * Evening shift Work Location: In person

#NowHiring #Technician Job Title: Shop Technician Contract: 4 Months Pay Rate: $18 - $20 /hr. Belcan is a leading provider of professional IT, Engineering, Workforce Solutions and staffing in the United States, Canada, UK, Europe, and India. A Shop Technician job in College Park, GA is currently available through Belcan. In this role you will provides service and repair of mechanical, electronic and other equipment requiring technical knowledge and expertise, effective diagnostic and repair techniques and procedures related to a wide variety of equipment. If you are interested in this role, Apply Today! Job Description: The Shop Technician provides service and repair of mechanical, electronic and other equipment requiring technical knowledge and expertise, effective diagnostic and repair techniques and procedures related to a wide variety of equipment. DUTIES AND RESPONSIBILITIES This list of duties and responsibilities is not all-inclusive and may be expanded to include other duties and responsibilities, as management may deem necessary from time to time.  Performs skilled technician work that involves diagnosis, replacement, repair and rebuilding a variety of equipment, components and/or systems.  Uses diagnostic equipment and a variety of tools specific to the trade.  Applies principles and practices of electrical and electronics theory.  Interprets and follows technical manuals, blueprints, mechanical drawings, and schematics.  Applies knowledge of the design and function of equipment.  Follows industry/government specific guidelines, particularly as they relate to safety, health and environmental practices.  Assists with research and development of new repair capabilities; this will include reading and understanding new manuals and may include on and off site training.  Assists with the maintenance of shop equipment and supplies.  Makes computer entries and completes various types of paperwork maintenance documents such as Service Reports and 8130-3"s in accordance with FAA Regulations and company policies. QUALIFICATION REQUIREMENTS a) Knowledge and Skills  Has basic knowledge of Aviation Maintenance.  Has the ability to use common hand tools and precision measuring equipment such as micrometers, depth gauges, flow meters, pressure gauges.  Is able to read and interpret component maintenance manuals in order to diagnose and repair equipment malfunctions.  Has a good understanding of corrosion control methods and remedies.  Has basic computer skills, i.e., Word & Excel b) Competencies  Technical Capacity  Organizational Skills  Time Management  Problem Solving/Analysis  Decision Making  Project Management  Communication Proficiency c) Education and/or Experience  A combination of education, training, work and/or other life experience in which would provide a reasonable assurance that the required knowledge and skills have been acquired by the applicant. Example: A two-year degree in technical discipline and/or comparable work experience such as an FAA Airframe and Powerplant Certification and/or Military or Civil aircraft maintenance experience. d) Mathematical Skills  Ability to apply basic mathematics to convert metric and/or standard rates of flow, torque, load and distance measurements. e) Communication Skills  Must be able to read, write and understand English fluently. f) Physical Demands  The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.  While performing the duties of this job, the employee is regularly required to talk and hear. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling, and climbing all day. The employee must frequently lift and/or move items over 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Location: College Park, GA Zip Code: 30337 Keyword"s: #CollegeParkjobs; #Technicianjobs; Start Date: Right Away #ZR "Belcan is an equal opportunity employer. Your application and candidacy will not be considered based on race, color, sex, religion, creed, sexual orientation, gender identity, national origin, disability, genetic information, pregnancy, veteran status or any other characteristic protected by federal, state or local laws."

POSITION: Technician – Electro-mechanical (Aviation) Status: Non-Exempt Location: Auburn, Washington Department: Electromechanical Shop (1131) Starting Hourly Pay Scale $25.00-$27.00 Overall Hourly Pay Scale $25.00-$30.36 Schedule: Monday-Friday, 5:55AM-2:30PM (40 hours/week), subject to overtime SUMMARY: This position is primarily responsible for the repair/overhaul of pneumatic/electrical operated aircraft components. The position cross-trains in other departments. The position requires the ability to read/write/understand the English language, following directions, and work in various teamwork settings. ESSENTIAL DUTIES AND RESPONSIBILITIES: Test, disassemble, inspect, repair and reassemble aircraft components. Work overtime and holidays on a short notice. Follow customer’s special instructions and requirements. Follow all company procedures and policies. Follow all safety and security policies and regulations. Back up department functions, cross-train in other departments and performs other duties as necessary. Report to work on a regular and consistent basis. REQUIRED ABILITY TO: Read and understand component maintenance/overhaul manuals. Read and understand drawings, wiring schematics and flow diagrams. Be a reliable self-starter. Demonstrate the use of common hand tools. Demonstrate the use of torque wrenches, micrometers, dial calipers and multi-meters. Stand and work for long periods of time. Lift, move, push and pull up to fifty (50) lbs. on a consistent basis. Demonstrate good verbal and written communication skills in English. Build alliances, partnerships and collaborate with co-workers in a tactful, professional and respectful manner. Be a team player with strong interpersonal skills. Resolve workplace differences and conflict to achieve goals and objectives in a professional manner. Foster an atmosphere of new ideas, input and creative solutions when faced with challenges. Listen to others attentively and retain/process information effectively. Promote a professional culture that is trustworthy, honest, and socially responsible while championing an energetic and positive work culture. REQUIRED EDUCATION/EXPERIENCE: High School degree or equivalent. Valid driver’s license and good driving record. This position requires drug testing and criminal background check in accordance with FAA regulations. Must be legally authorized to work in the United States. 6 months + of mechanical experience. DESIRED EDUCATION/EXPERIENCE: Airframe or Airframe and Powerplant license. 1 year + of experience of electro-mechanical experience. WORKING CONDITIONS: Continuous work in manufacturing/production setting. Continuous walking and standing, and lifting, pushing and pulling heavy objects throughout the work day. Flexibility to work long hours and occasional weekends. Why Work for Us? We offer competitive pay and benefits including: Medical, Dental, Vision, Life and AD&D Insurance Vacation, Personal Time Off, and Holiday Pay Long-Term and Short-Term Disability Flexible Spending Account (FSA) Health Savings Account (HSA) with an employer contribution of $500 a year 401(k) Plan with discretionary employer match Employee Assistance Program (EAP) Employee Discount Perks Career growth and community involvement Tool/Safety Shoe Reimbursement Program and mileage reimbursement for substance testing.

A&P Mechanic – Various Shifts Textron Aviation has been inspiring the journey of flight for nine decades through the iconic and beloved Cessna and Beechcraft brands. We are passionate advocates of aviation, empowering people with the freedom of flight. As you join our legacy as a global leader in private aviation, you’ll have opportunities to try new fields, expand your skills and knowledge, stretch your abilities, and build your career. We provide a competitive and extensive total rewards package that includes pay and innovative benefits to support you and your family members – now and in the future, beginning day one. Your success is our success. Description JOB SUMMARY: To perform licensed A&P Mechanic work, including repairs, maintenance, overhaul, modifications, and troubleshooting, on Textron Aviation aircraft at the 26L509- Mesa. JOB RESPONSIBILITIES: Performs a variety of mechanical duties on various aircraft models involving diagnosis of malfunctions and required disassembly, rework, repair, replacement, reassembly, or adjustment of various aircraft systems to prepare aircraft for flight and delivery to customer. Performs turbine engine troubleshooting, inspection, repair, and engine run-ups. Conducts airframe system, component changes and systems checkout. Performs installation of service bulletins and kits on airframes and engines. Requires knowledge of 100 hour, annual and progressive inspection procedures set forth in FAR 43. Uses equipment such as tensiometers, micrometers, pressure gauges, dial gauges, vacuum gauges, timing lights, and a variety of hand tools to repair or modify systems or assemblies. Required to tow and move aircraft during the performance of maintenance duties. Assists in the cleaning of parts and components during the repair and assembly of aircraft. Performs other tasks and duties associated with the service center operation. Responsible for own work Qualifications EDUCATION: High school education or equivalent required A&P License is required In lieu of A&P license must have DD214 form to be reviewed and eligible for company-sponsored technical certification and future license achievement. Must have hours of On-the-Job training (MOS/NEC/AFSC) reviewed and evaluated by FSDO Requires use of arithmetic, blueprints, and specifications plus knowledge of jet and piston airframe and engine principles. Must have knowledge of aircraft mechanical systems. EXPERIENCE: Requires a minimum of 2 years' experience with diversified jet, turboprop, piston, modification, aircraft/flight maintenance or airframe sheet metal maintenance. Preferred 5 years of experience. Preferred experience in a customer service facility performing inspections and repair of aircraft QUALIFICATIONS: Must be able to obtain and maintain an Airport Security Badge through the local airport authority (if applicable). The above statements are intended to describe the general nature and level of work being performed by employees assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. This role is eligible for up to a $15,000 (pre-tax) sign-on bonus based on level of experience. Terms & conditions apply. The Company reserves the right to amend or suspend this program at any time. EEO Statement Textron is committed to providing Equal Opportunity in Employment, to all applicants and employees regardless of race, color, religion, age, national origin, military status, veteran status, disability, sex (including pregnancy and sexual orientation), genetic information or any other characteristic protected by law. Recruiting Company: Textron Aviation Primary Location: US-Arizona-Mesa Job Function: Flight Operations Schedule: Full-time Job Level: Individual Contributor Job Type: Standard Shift: First Shift Job Posting: 06/30/2025, 3:59:56 PM Job Number: 334268

SUMMARY: The Aviation Accessory Technician will perform maintenance and alteration tasks on civil aviation articles in accordance with the current technical data provided in the manufacturers’ Instructions for Continued Airworthiness, Services Bulletins, service letters, Airworthiness Directives, government and industry standard practices, and other data acceptable to or approved by the FAA. DUTIES & RESPONSIBILITIES: Responsibilities include, but are not limited to: • Assemble limited fuel controls, or limited governors, or all fuel, oil, or air accessories. • Test limited fuel, oil, or air accessories (Excluding fuel controls and governors). • Utilize hand tools daily. • Utilize specialty tools for precision measurements daily. • Read and interpret technical data and drawings. • Operate test equipment as needed to ensure components pass function test. • Verify that all components are tested to the appropriate specifications to ensure airworthiness. • Troubleshoot components failing test or set up to determine root cause of failure. • Generate data plates for components completed with use of a laser system. • Document maintenance records of all repair work orders performed. • Other duties as assigned. MINIMUM REQUIRMENTS: • High mechanical aptitude required. • 1-3 years of aviation accessary experience required. • Flexible to changing workloads/priorities based on customer requirements. • Maintain an orderly and productive work environment. • Ability to function in fast paced environment while maintaining a high level of quality • Ability to read and interpret technical drawings and data required. • Basic computer operating skills. VSE is an Equal Opportunity/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, Protected Veteran status, sexual orientation, or any other characteristic protected by federal, state or local law. At VSE, we don’t just hire employees; we nurture careers and champion well-being. We understand that our success is driven by the people who make up our incredible team, and that’s why we’re committed to providing a workplace that goes beyond just a job-it’s a place where you can truly flourish. When you choose VSE, you’re choosing a company that prioritizes YOU. Let us tell you why: Time Off: Enjoy Paid Time Off to relax and recharge. Family Support: We offer Paid Maternity Leave and Paid Bonding Leave, along with access to our Employee Assistance Program, ensuring your family’s well-being. Education: Pursue your educational goals with Tuition Reimbursement for Undergrad, Technical, and Graduate Programs. Financial Security: We offer a 401(k) and Employee Stock Purchase Plan to secure your financial future. Healthcare: Your health is essential, and we provide Health, Dental, and Vision Care. Flexible Spending: Take advantage of HSA, FSA, and Dependent Care plans for added flexibility. Insurance: We've got you covered with Short-Term and Long-Term disability insurance. Competitive Salaries: Your hard work is rewarded with competitive salaries. Ready to be part of a company that values you as much as your skills and expertise? Join VSE and let’s take your career to new heights while ensuring your well-being every step of the way. Come grow with us. Your future begins here. Apply TODAY!

C&L Aviation Services is currently seeking a *full-time Component-Shop Technician* to join our team. This position involves performing component-based maintenance, repair, and inspections in our Component Shop under the direct supervision of FAA-certified Aircraft Technicians. *No prior aviation experience is required*—we’re looking for motivated individuals with mechanical aptitude and a strong work ethic. *Key Responsibilities:* * Assist licensed Technicians with servicing, maintenance, and component modifications * Perform tasks efficiently to meet deadlines and performance goals * Accurately complete all necessary documentation in compliance with FAA, customer, and company requirements * Maintain a clean, organized, and safe work area, including tools and equipment *Qualifications & Skills:* * Hands-on mechanical repair experience in any industry * A strong desire to learn and grow in the aviation field * Excellent communication skills and a team-oriented attitude * Commitment to productivity, safety, and high-quality workmanship * Ability to follow directions, procedures, and safety regulations * Able to lift up to 50 pounds regularly, work in confined spaces, and safely climb ladders with loads up to 25 pounds * Valid driver’s license * High school diploma or equivalent *Additional Information:* * Employment is contingent upon passing a DOT-mandated pre-employment drug test and participation in random drug and alcohol testing throughout employment. Job Type: Full-time Schedule: * 5x8 * 8 hour shift * Day shift * Monday to Friday Work Location: In person

COMPANY OVERVIEW: Turbine Controls MRO, a VSE Aviation Company (“TC MRO”) is a globally recognized maintenance, repair and overhaul facility with over 180 employees and more than 45 years of expertise in engine component and accessory repair services. Our locations in Bloomfield, Connecticut and Miramar, Florida service original equipment manufacturers, airlines, engine centers, asset managers and government agencies supporting components and LRU's for commercial, military, airframe and industrial applications. Our focus on customer satisfaction, process improvement, quality, delivery and competitive pricing has made TC MRO a recognized leader in the aerospace industry. SUMMARY: The Aviation Accessory Technician will perform maintenance and alteration tasks on civil aviation articles in accordance with the current technical data provided in the manufacturers’ Instructions for Continued Airworthiness, Services Bulletins, service letters, Airworthiness Directives, government and industry standard practices, and other data acceptable to or approved by the FAA. DUTIES & RESPONSIBILITIES: Responsibilities include, but are not limited to: • Assemble fuel controls, or all governors, or fuel, oil, or pneumatic accessories. • Utilize hand tools daily. • Utilize specialty tools for precision measurements daily. • Read and interpret technical data and drawings. • Generate data plates for components completed with use of a laser system. • Document maintenance records of all repair work orders performed. • Other duties as assigned. MINIMUM REQUIRMENTS: • 0-1 years of mechanical work experience • High mechanical aptitude • Flexible to changing workloads/priorities based on customer requirements. • Maintain an orderly and productive work environment. • Ability to function in fast paced environment while maintaining a high level of quality • Ability to read and interpret technical drawings and data required. • Basic computer operating skills PREFFERED REQUIRMENTS: • 1-3 years of aviation accessory experience OTHER QUALIFICATIONS: • The selected applicant will be subject to a background check and drug testing. VSE is an Equal Opportunity/Affirmative Action Employer and does not discriminate on the basis of race, color, religion, gender, age, national origin, disability, Protected Veteran status, sexual orientation, or any other characteristic protected by federal, state or local law. At VSE, we don’t just hire employees; we nurture careers and champion well-being. We understand that our success is driven by the people who make up our incredible team, and that’s why we’re committed to providing a workplace that goes beyond just a job-it’s a place where you can truly flourish. When you choose VSE, you’re choosing a company that prioritizes YOU. Let us tell you why: Time Off: Enjoy Paid Time Off to relax and recharge. Family Support: We offer Paid Maternity Leave and Paid Bonding Leave, along with access to our Employee Assistance Program, ensuring your family’s well-being. Education: Pursue your educational goals with Tuition Reimbursement for Undergrad, Technical, and Graduate Programs. Financial Security: We offer a 401(k) and Employee Stock Purchase Plan to secure your financial future. Healthcare: Your health is essential, and we provide Health, Dental, and Vision Care. Flexible Spending: Take advantage of HSA, FSA, and Dependent Care plans for added flexibility. Insurance: We've got you covered with Short-Term and Long-Term disability insurance. Competitive Salaries: Your hard work is rewarded with competitive salaries. Ready to be part of a company that values you as much as your skills and expertise? Join VSE and let’s take your career to new heights while ensuring your well-being every step of the way. Come grow with us. Your future begins here. Apply TODAY!

Task Description: Aircrew Survival Flight Equipment Technician I, WG-4818-09: This occupation includes jobs involved in disassembling, repairing, testing, troubleshooting, examining, fitting, modifying, maintaining, installing, and determining serviceability of aircraft survival and flight equipment such as helmets, torso harness assemblies, preservers, parachutes, life rafts, chemical and biological protective devices, survival kits, oxygen masks, and anti-G-suits. The work includes operational and circuit checks of emergency signaling and communication devices such as survival radios and beacons. The work requires knowledge of mechanical and electrical repair and maintenance procedures, pyrotechnic and explosive devices, and aircraft egress systems. In addition, the work requires familiarity with aircraft assigned to the unit, detailed knowledge of the operation and characteristics of aircraft survival and flight equipment, and the ability to demonstrate and explain proper usage and operation of the equipment. Skill and Knowledge: Shall have the ability to troubleshoot malfunctions in various Aircrew Survival systems and be able to perform general Organizational Level maintenance and possess one or more of the specialties of the assigned aircraft below: Aircrew Survival Flight Equipment (ASFE) and Aviation Life Support Equipment Responsibility: Performs requirements in accordance with the procedures established in the PWS. Specifically performs preventative maintenance on assigned T/M/S aircraft ALSS assigned to the activity IAW T/M/S Maintenance Requirements Cards (MRC's) and approved directives. May perform services involving A&E material handling and shall have explosive handling personnel qualifications and certifications (QUAL/CERT) required IAW OPNAVINST 8023.24 when performing these duties. Performs diagnosis and corrective actions, disassembles, inspects, evaluates, and accomplishes necessary repairs, lays out work according to technical instructions and technical directives. Determines what repairs, modifications, and part replacements are required. May be required to verify work performed by another for which he/she is qualified to perform. Task Requirements: Troubleshoots malfunctions on Aircrew Survival Flight Equipment. Performs “O” Level maintenance procedures on pyrotechnic and explosive devices, and aircraft egress systems. Read and interpret manufacturers' maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Performs phase, scheduled, unscheduled, periodic, and other hourly or calendar inspections. Uses chemical sealants. Requisitions repair parts, materials, and consumable supplies through military supply system. Performs general housekeeping and FOD prevention duties. Performs other tasks as directed. Preferred Qualifications: Five (5) or more years' experience as Aircrew Survival Flight Equipment Technician. Basic Qualifications: Aircrew Survival Equipmentmen (PR) “A” School or equivalent. Personnel performing Aircrew Survival Equipment maintenance and QAR/CDQAR inspections shall be ordnance certified per OPNAVINST 8023.24/MCO 8023.3. ALSS maintainers must meet the specific training and certification standards outlined in CNAFINST 4790.2 (series) Three years ASFE maintenance experience Must be able to work shift schedules as required per Performance Work Statement (PWS) Must be able work work-week schedules i.e. M-F, Sn-Th or as required per PWS Must be able to pass a background check Must be able to obtain favorable National Agency Check with Written Inquires (NACI), IAW DTM-08-003 “Next Generation Common Access Card (CAC) Implementation Guidance or Secret security clearance as required for the position Must be able to climb ladders, raised platforms, and aircraft Must be able to use hand and power tools Must have dexterity to handle small parts Must be able to deploy to support off station exercises and perform other support duties if required Compensation $41.40/hour Other Compensation Employees receive a health and welfare benefit of $8.85 per hour paid up to 40 hours per week. Benefits Employees are offered medical, dental, vision, and basic life insurance. Employees are able to enroll in KAI's 401k plan. Employees accrue 5.52 hours of PTO per pay period. KAI employees at FRCW Point Mugu receive 12 paid holidays. Retirement plan is also available. Employment is contingent on (a) your ability to provide appropriate proof of your identity and eligibility to work in the United States; (b) your references and any background check being satisfactory to the Company; (c) you successfully passing a pre-employment drug test; and (d) your ability to get a required clearance by your effective start date, if needed; and (e) KAI commencing performance on this contract. Equal Opportunity Employer Disability/Vets

TAT Technologies Greensboro Facility is part of a multi-site, global aerospace company dedicated to our customer experience of exceeding expectations. We are the leading APU leasing and repair station for key commercial and military aircraft solutions with over 50 years of experience in the industry. We have an ambitious and fast-growing environment that believes in the power of team collaboration with the deep-rooted belief that there is no substitution to personal relationships and interactions. We offer a flexible work environment enabling talented individuals to fulfill their development goals through drive, energy, and passion for the customer. TAT Technologies Greensboro is looking for qualified APU LRU (Line Replacement Unit) Technicians. APU (Auxiliary Power Unit) is a turbine engine utilized on the aircraft to provide electrical and pneumatic power during periods when the main engines are not running. The following is a list of job duties that an APU LRU (Line Replacement Unit) Technician will perform: Essential Job Functions: Responsible for the disassembly, cleaning, analytical inspection, repair schemes, painting, assembly, testing and travelers related to LRUs, components, parts and tools. Responsible for maintaining tooling and test equipment. Read and comply with work instructions. Write technical and accurate reports as needed. Work independently of others as well as teams. Accurately complete work orders, BOMs, data inputs within ERP system. Read and understand Commercial, FAA, EASA, Repair Station, and ISO documentations. Process proper tools. Understand and practice safe and efficient productive use of tools. Mentor and train other personnel. Immediately report to any supervisor any safety, quality or un-ethical actions or conditions they perceive to exist for immediate evaluation and resolution. Operate, maintain and service specialized equipment. Perform other duties as assigned by any supervisor in a professional manner. Requirements High School Diploma/GED minimum. Minimum 2 years of experience preferred. Technical school courses in mechanic or machinist classes preferred. FAA Airframe and/or Powerplant license or equivalent certification preferred. Must be able to pass a respirator fit test and wear a respirator while in our blast room. Basic knowledge of mechanical and metal work required. Computer skills in Microsoft Word, Excel, Outlook, and Quantum preferred. Read and adhere to verbal and written instructions. Make basic decisions and work with deadlines while understanding pressure. Work with people and communicate (both oral and written communication) with other personnel and management effectively. Benefits TAT Technologies is dedicated to providing an inclusive, fun, and unique workplace. We believe in acknowledging and appreciating the value of our team members. One way we value our team is by providing a comprehensive and expansive benefits offering to include Major Medical, Dental, Vision, Life, 401K with company matching, STD, LTD, accidental coverages, EAP, and more. Insurance carriers vary based on location.

Summit Helicopters, an employee-owned company, is a leader in the rotorcraft aviation market recognized for its innovative solutions and value-added work from minor airframe inspections, removal and installation of major components, component overhaul and structural repair. In addition to operating our own fleet of both rotor and fixed wing aircraft, we are also an FAA certified repair station. Essential to Summit’s mission are our employees who provide a unique set of skills, knowledge and experience that support us in providing competitive and reliable aircraft alterations and maintenance. Our commitment to our employees is recognized through our competitive benefits package and compensation along with taking part in innovative projects in the ever-changing aviation maintenance market. Primary responsibilities include, but not limited to: * Overhaul major components of Bell 206 series, 505, 407, Huey, 205, 212,412 * Participated in Bell Overhaul courses. * Work with procedures and manuals to ensure compliance with company, manufacturer, and FAA regulations. * Perform overhauls on complex parts with an emphasis on Bell Helicopter Components. * Adheres to company policies and procedures in preparing, collecting, recording, and maintaining project data. * Prepare professional correspondence to vendors and customers as required. * Ability to research parts and prepare quotes from simple to complex projects. Required skills/Abilities: * NDT experience and certifications to include Mag Particle, Ultrasonic and Dye-Penetrants * Interpersonal skills to work effectively and cooperatively with all levels of management and staff. * Ability to accurately use and read specialized measuring devices (i.e. micrometers, dial calipers, bore gauges, etc.) * Experience with machine shop tools such as milling machines, lathes, drill presses are a plus. * Must be able to lift and move items of 50 pounds or more on a regular basis. * Excellent communication and people skills. * Must be a US citizen with a valid Driver’s License. * Must have a high school diploma, or GED. Must be able to pass pre-employment background check and FAA. regulated drug/alcohol tests prior to start. Will be enrolled in our random drug pool. Benefits: Employee Stock Option Plan, 401K matching, Dental, Vision, Health insurance, HSA Matching, Paid Time Off and Life insurance. Job Type: Full-time Pay: $25,000.00 - $70,000.00 per year Benefits: * 401(k) * Health insurance * Health savings account * Life insurance * Paid time off * Vision insurance Schedule: * 8 hour shift * Monday to Friday Experience: * Technical/Mechanical: 2 years (Required) License/Certification: * Airframe & Powerplant License (Required) Work Location: In person

JOB DESCRIPTION Now Offering for Eligible New Hires: Sign-On Bonus of up to $15,000 Relocation assistance Job Title: Airframe & Powerplant (A&P) Technician I, II, III Experience Required: Corporate and General Aviation Company: Signature Aviation Location: Winston-Salem, NC Note: This job posting is for all levels of experienced aircraft technicians. A Signature Aviation Recruiter will reach out to you once we’ve identified an opportunity that matches your skills and level of experience. Position Overview: As an A&P Technician at Signature Aviation, you will play an integral part in the high level of service that we provide for our guests. Responsibilities include inspecting, repairing, overhauling, upgrading, and cleaning aircraft in compliance with Federal Aviation Administration regulations, aircraft manufacturer recommendations, and company policies. Technicians at all levels maintain detailed records of work conducted, inspections performed, and safety compliance. RESPONSIBILITIES Key Responsibilities: • Technical Tasks: Perform routine and complex maintenance tasks, including engine runs, taxi operations, engine and flight control rigging, and troubleshooting aircraft systems. • Documentation: Read and interpret technical data, make work order entries, and maintain detailed records. • Compliance and Safety: Ensure adherence to safety rules, regulations, and company procedures. • Supervision and Management (level dependent): Supervise and mentor junior technicians, manage multiple projects and crews, and communicate effectively with customers and senior leadership. QUALIFICATIONS Qualifications: • Education: o Tech I and II: Associate’s degree or equivalent. o Tech III: Master’s degree or equivalent with significant experience. • Experience: Relevant field experience varies by level, from zero to ten+ years. o Tech I – Zero to 2 years’ experience o Tech II – 2 to 10 years’ experience o Tech III – 10+ years’ experience • Licenses: Airframe and Powerplant (A&P) license required for all levels. • Skills: o All levels: Ability to interpret technical documents and communicate effectively. o Tech II, III and IV: Manage projects and teams. Additional Requirements: • Must pass background checks, drug screens, and be insurable by the company. • Strong attention to detail and high ethical standards. Benefits: • Health and Wellness options, 401k match, paid time off, tuition assistance, and training opportunities. Equal Opportunity Employer: • Signature Aviation is an Equal Opportunity Employer including Disability/Vets. ABOUT US With more than 225 locations worldwide, Signature Aviation is the largest global network of private aviation terminals, delivering safe, convenient, and elevated experiences to those we serve. As a premier hospitality organization and a certified Great Place to Work™, we are committed to redefining private air travel. Our nearly 6,000-strong team of aviation experts and enthusiasts is dedicated to delivering excellence to our guests and communities, and it starts with taking care of our team. Signature provides a variety of benefits, programs, and resources to support our team members’ overall well-being and professional development. We proudly volunteer and give back, focusing on elevating the neighborhoods where we operate, empowering the next generation of aviation professionals, and supporting our veterans. From your health to your financial wellness, there are several benefits for you and your family when joining Signature Aviation. Our Benefits: Medical/prescription drug, dental, and vision Insurance Health Savings Account Flexible Spending Accounts Life Insurance Disability Insurance 401(k) Critical Illness, Hospital Indemnity and Accident Insurance Identity Theft and Legal Services Paid time off Paid Maternity Leave Tuition reimbursement Training and Development Employee Assistance Program (EAP) & Perks Qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity, national origin, or other protected characteristics.

RESPONSIBILITIES/DUTIES: Responsible for inspection, troubleshooting and repair of aircraft to meet company, FAA and customer standards. This includes: • Fully analyzes all required blueprints, drawings, work orders and sketches in order to troubleshoot, repair and install desired product or part. • Can detect errors and correct through proper departmental channels • Schedules items through the shop to maintain on-time deliveries • Checks all mechanical components prior to installation to prevent damage • Accurately estimates hours and materials for scheduled jobs • Ability to operate all required ground support equipment QUALIFICATIONS: • Extensive knowledge of all aircraft mechanical systems functions and interactions • Thorough working knowledge of all current FAA Regulations • Thorough working knowledge and use of MM, IPC, SRM and other manufacturers repair and troubleshooting documents • Thorough working knowledge of blueprints, work orders and task cards to determine type of configuration and special instructions prior to installation • Extensive knowledge of aircraft accessories, components and other hardware • Comprehensive knowledge of estimating hours and materials for completing projects • Complete knowledge of aircraft fasteners and applications • Complete knowledge of all related skill area machines, equipment and hand tools • Ability to install and rig aircraft flight control surfaces • Ability to operate aircraft systems • Ability to do engine "run-up" and "trim engines" Must have a command of the English language, both written and verbal SPECIAL POSITION REQUIREMENTS: • Wear appropriate PPE as designated in each work area (e.g. safety glasses, etc.) • High School diploma or equivalent • Airframe and Power Plant License • Must have a good command of the English language, both written and verbal • Must possess a valid driver license SUPERVISORY RESPONSIBILITY: • None TRAINING REQUIREMENTS: • General Safety • Quality System Awareness WORKING CONDITIONS AND PHYSICAL EFFORT: • Heavy physical effort required on occasion • Continuous mental and visual attention required • Employees may be subject to random drug and alcohol testing under FAA regulations • Work performed in a shop environment on a regular basis • Occasional travel to line stations • Exposed to any number of elements but with none present to the extent of being disagreeable • Must be available to travel up to 30% for work at different workstations as needed, and/or shifts from one station \ location to another Mountain Air Cargo, Inc. is an Equal Opportunity Employer. We offer a comprehensive benefits package.