Aircraft Structures Maintenance Jobs

Y-Tech Services Inc Regular Aircraft Mechanic I - C-130 Structures Description: The Aircraft Mechanic I inspects, troubleshoots malfunctions, rigs, repairs and modifies aircraft structures, structural components and aircraft systems of moderate difficulty. This mechanic repairs, replaces, and rebuilds aircraft structures, such as wings and fuselage, and functional components including rigging, surface controls, using hand tools, power tools, machines, and equipment such as shears, sheetmetal brake, rivet gun, and drills. Inspects components/repairs for structural serviceability according to specifications and technical publications. Removes and installs close tolerance, high-strength fasteners in major aircraft structural components. Manufactures with the use of jigs, fixtures, forms, and molds to fabricate repair or replacement parts. Uses advanced metalworking practices, equipment, and tools to form, cut, bend, and fasten replacement or repair parts to damaged structures and components. Applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies required expertise in restoring equipment condition and or operation; applies comprehensive technical expertise to solve moderate to complex problems. This worker reads and interprets manufacturers and maintenance manuals, service bulletins, technical data, engineering data, and other specifications to determine feasibility and method of repairing or replacing malfunctioning or damaged components. Duties may include requirements to adjust, repair, or replace electrical system wiring and aircraft accessories; perform preflight, thru-flight, and basic post-flight maintenance inspections, perform as Refuel/Defuel, Jack and Tow Team member/supervisor. Individual may also be required to perform other miscellaneous aircraft servicing to include, but not limited to Lox, Hydraulic and Engine Oil, service aircraft tire and perform aircraft lubes. Basic Qualifications: Must have a minimum of 5 years aircraft structural maintenance experience. This mechanic must have a thorough knowledge of aircraft structural and mechanical systems and must be able to apply knowledge to solve moderate to complex problems or malfunctions. The candidate must be able to interpret technical orders, blueprints, or other written guidance to accomplish repairs, replacement or modification of structural components. Individuals must have a thorough knowledge of aircraft mechanical components with the ability to troubleshoot, adjust, repair, and replace parts/components; requires a broad working knowledge of C-130J/H aircraft systems including hydraulics, structures, engines, refuel pods, and electrical systems. Experience performing periodic, and other hourly, special, or calendar inspections. Basic knowledge of electrical theory and thorough knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, and powered/non-powered support equipment. Proficient with using USAF Technical Orders, the Data Transfer and Diagnostic System (DTADS), documentation of AFTO 781 forms, and entering data into the Integrated Maintenance Data System (IMDS). Experience with making entries in aircraft logs and records. Must be able to prioritize workload to maintain schedules on assigned projects Experience with aircraft launch/recovery, performing preflight, thru-flight, and basic post-flight and corrosion inspections. Prior experience performing other miscellaneous aircraft services including but not limited to Lox, Hydraulic, and Engine Oil, service aircraft tire/struts, and must be familiar with handling HAZMAT/HAZWASTE materials. Desired Skills: Six (6) years of experience on at least one AFSOC C-130 MDS. Heavy structures modification experience on C-130J Prior C-130 Isochronal/Letter Check experience Three (3) years of C-130J flight line aircraft experience Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret Other Important Information You Should Know: Ability to Work Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Schedule for this Position: Non- standard 40 hour work week as assigned by leader PREFERENCE STATEMENT Preference will be given to Calista shareholders and their descendants and to spouses of Calista shareholders, and to shareholders of other corporations created pursuant to the Alaska Native Claims Settlement Act, in accordance with Title 43 U.S. Code 1626(g). EEO STATEMENT Additionally, it is our policy to select, place, train and promote the most qualified individuals based upon relevant factors such as work quality, attitude and experience, so as to provide equal employment opportunity for all employees in compliance with applicable local, state and federal laws and without regard to non-work related factors such as race, color, religion/creed, sex, national origin, age, disability, marital status, veteran status, pregnancy, sexual orientation, gender identity, citizenship, genetic information, or other protected status. When applicable, our policy of non-discrimination applies to all terms and conditions of employment, including but not limited to, recruiting, hiring, training, transfer, promotion, placement, layoff, compensation, termination, reduction in force and benefits. REASONABLE ACCOMMODATION It is Calista and Subsidiaries' business philosophy and practice to provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. The statements contained in this job description are intended to describe the general content and requirements for performance of this job. It is not intended to be an exhaustive list of all job duties, responsibilities, and requirements. This job description is not an employment agreement or contract. Management has the exclusive right to alter the scope of work within the framework of this job description at any time without prior notice. Welcome Thank you for your interest in Yulista! As you get to know Yulista, you’ll discover that we encompass many subsidiaries, each offering unique and specialized capabilities within their respective fields. All our subsidiaries operate cohesively under the overarching Yulista umbrella. This allows us to leverage combined strengths, foster collaboration across diverse expertise areas, and provide comprehensive solutions to our customers. About Us Since 2002, Yulista has leveraged our technical expertise to maintain aircraft and ground vehicles, advance aerospace technology and missile defense, support national security, and sustain base and maritime operations. In a fiercely competitive market, our agile teams embrace complex challenges, delivering mission-critical solutions. Yulista has been a trusted and preferred partner for mission-ready clients, renowned for consistently providing innovative expertise that drives success. Our greatest strength lies in the passion and commitment of our men and women who strive to make the impossible possible.

POSITION SUMMARY Ensures that sheet metal and composite shop repair activities are performed in accordance with company and FAA repair procedures and policies, and ensures conformance to prescribed standards and tolerances. JOB RESPONSIBILITIES Assists the Supervisor, aircraft modifications in making work assignments within area of responsibility. Provides instruction and on-the-job training to technicians. Carries out diagnostic and repair tasks along with technicians, observing approved and prescribed procedures; performs the more technically complex repairs. Submits work to Quality Assurance for final inspection and re-certification of airworthiness. Ensures that assigned technicians use appropriate manual references and proper tools in performing their repair duties. Monitors quality of work in progress, as well as performance to production schedule; works with the Supervisor, aircraft modifications to implement ways to remedy behind schedule conditions. Assists in the maintenance of records and technical data required by the FAA. Monitors shop requirements and corresponding Stores inventories to avoid shortages that would adversely affect production. Assists Supervisor in planning work around to alleviate shortage conditions. Assists Supervisor in establishing procedures for inclusion in repair ESSENTIAL KNOWLEDGE, SKILLS AND ABILITIES Education: High School/ GED A&P and / or structures experience a plus, or repairman's certificate may substitute for A&P Experience: Master Technician Role requiring Expert skills to perform all standard and emerging tasks within the Technical Area assigned to. Generally, at least 8 years of experience or greater in area of responsibility 5 years or more experience doing aircraft structures as well as able to use all tech data and aircraft drawings to locate part numbers and accomplish repairs. Supervisory experience a plus Knowledge, Skills & Abilities: Customer Service knowledge Must be able to fabricate parts. Reads work orders, blueprints, and specifications or examines sample or damaged part or structure to determine repair or fabrication procedures and sequence of operations. Repair body or structure of aircraft according to specifications. Knowledge of machines and tools, including their designs, uses, repair, and maintenance. Be proficient in the usage of air powered hand tools and related equipment. Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Working Conditions / Environment/ Special Requirements Ability to work in a safe professional manner adhering to all regulatory requirements including, OSHA, EPA, State and Federal regulations. As required by the position, must have the ability to wear a respirator as per OSHA 29 CFR 1910.134 "Respirator Protection" regulations with no restrictions that would prevent the proper use and/or seal of the respirator. The Lead Technician will be properly certificated in accordance with either FAR 65 Subpart D or Subpart E Ability to work flexible hours and different shifts if required Employees will be subject to the random drug and alcohol testing under FAA regulations Embraer is an Equal Opportunity Employer.

When applicable, Bombardier promotes flexible and hybrid work policies. Why join us? Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. Bombardier’s Benefits Program With our employees’ well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: Insurance plans Dental, medical, life insurance, disability, and more Competitive base salary Retirement savings plan Employee Assistance Program What are your contributions to the team? Troubleshoot, repair, inspect and perform maintenance on customer aircraft Fabricate and or modify structural modifications on aircraft parts Perform minor structural repairs on composite components either attached or detached Assist in conducting hidden damage inspection of aircraft structures Assist with complex structural repairs either on or off aircraft Assist with aircraft component repair Remove / install aircraft components as required Comply with environmental health and safety policies/procedures Participate in 5-S activities Perform work in a safe and timely manner Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Assist with mechanical / electrical removals and installations as needed Assist with maintenance at off-site locations as needed Assist with towing aircraft as needed Assist with other maintenance disciplines as needed Adhere to Bombardier General Work Requirements for factory, shop and/or hanger positions How to thrive in this role? Skills, knowledge & experience: You have received training from a sheet metal aircraft technical school or have equivalent schooling You typically have at least 4 years of Corporate aircraft structural sheet metal repair / modification experience You have the ability to interpret and work with mechanical engineering drawings You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status You own a basic set of hand tools with the ability to demonstrate Inventory and control of tools You have the ability to obtain appropriate Ground Support Equipment (GSE) qualifications as required You are able to work unscheduled overtime including nonscheduled work days and holidays You are able to work in seasonal/inclement weather outside You have the ability to obtain a Security Identification Display Area badge (SIDA) if applicable You have an A Certification, A&P Certificate or Repairman Certificate (preferred) You have basic PC skills Now that you can see yourself in this role, apply and join the Bombardier family! Bombardier is committed to being an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by applicable federal, state or local law. Job Structures Technician - Evening Shift Primary Location Hartford Service Center Organization Learjet Inc Shift Monday-Thursday, 2:30 PM – 1:00 AM Employee Status Regular Requisition 2123 Structures Technician - Evening Shift

West Star is the fastest growing maintenance repair organization in the industry, and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. When you join our team, we don't think you should have to wait for your benefits to kick in. That's why when you start, they start with you! This includes medical, dental, 401K match, time off accruals, weekly pay days, and much more. We don't want you to live to work, we want you to work and live. What You Can Expect as a Lead, Structures Technician at West Star: This position requires advanced knowledge of aircraft structures, fastening systems, procedures, and techniques. The technician will work closely with Lead Technicians to organize manpower and set priorities for involved projects. They must be competent at working from drawings, blueprints, and written instructions. They may be required to work independently or lead small projects. Supervision of the team and direction of project flow will be a primary function. Overall coordination of workflow for the project will also be a primary function. They will be required to work independently and lead multiple projects. You Will Be ESSENTIAL to Many FUNCTIONS, Including: Perform involved, extensive, and precise structural operations such as drilling, riveting, and cutting on airframe and associated components. Maintain quality control on all aspects of assigned projects. Supervise, instruct, and train assigned crew members. Coordinate with other crews working on aircraft to minimize interference and ensure smooth workflow. Provide input to and cooperate with Engineering and Quality Assurance in the development and documentation of modifications and repairs. Address minor disciplinary issues and problem resolution. Basic computer skills to be able to navigate electronic training, manuals, and maintenance databases. Effectively and clearly communicate (i.e., speak, write, read) in English. Any other job-related duties as assigned by the supervisor or management. Requirements: What You'll Need to Bring With You: Your Education: A high school diploma or equivalent, and an Airframe and Powerplant License is preferred. A valid driver's license approved for airline travel and/or a valid passport is ideal, but not mandatory. Your Experience: 3–5 years' experience in aircraft maintenance and structures repair preferred. Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast-paced environment where working under specific deadlines and time constraints will be common. Your Sense of Responsibility: Attend work every day as scheduled, to include overtime and weekend assignments. Notify the supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each day. Perform all work in accordance with Federal Aviation Administration guidelines. Follow all company and safety rules during performance of duties. Maintain customer-oriented work habits. Other Particulars: Physical Requirements: Lift 50 lbs. Routine walking, bending, squatting, or sitting. Routine or repetitive physical motion with arms and hands. Climb ladders and stairs; work in small, restricted areas. Stand for long periods. Mental Requirements: Understand and implement regulations and guidelines. Troubleshoot or evaluate system operation. Work professionally with others. Supervision: Work under the supervision of the assigned supervisor. May be directed to supervise other technicians in specific jobs. Working Conditions: Work is performed in a hangar environment, subject to extreme temperature variations from very cold to very hot. Work outside during aircraft runs will occur. Varied positions in and around the aircraft. Equipment Used: Personal hand tools supplied by the mechanic. Pneumatic, hydraulic, and electrical equipment. Jacks, stands, lifts, and other support devices. Tugs, power carts, and other engine-powered equipment. The lists above include the main items for this job position to be successful, but are not limited to other things that might arise over time. The person applying for this position must understand that the objectives, responsibilities, and requirements could change for better success for the company and the person. West Star Aviation is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran status, or disability status.

Job ID: 696638BR Date posted: Jul. 01, 2025 Description:Come join Lockheed Martin in The Last Frontier! What You Will Be Doing We are currently seeking a dedicated Structures Technician to join our dynamic team, focusing on the F-22 aircraft. The vast wilderness of Alaska offers a virtually unlimited playground for the outdoor enthusiast, while nearby Anchorage provides the same amenities you would find in any large city. This position is located at Joint Base Elmendorf-Richardson, Alaska supporting the F-22 modification line. Domestic travel may be required. This pivotal role involves a broad spectrum of responsibilities. Some of the job requirements & responsibilities include but are not limited to: - Repairs, replaces, and overhauls F-22 aircraft structural systems to ensure airworthiness. -Determines feasibility and method of repairing or replacing malfunctioning or damaged components. Work typically requires a detailed understanding of blueprints and aircraft drawings. - Selected candidate will have experience with understanding technical requirements on fighter type aircraft. - Candidate must be able to read and interpret engineering drawings, technical manuals, structure repair manuals, understanding symbols, flags, and general notes. - Identify aircraft locations by station, butt-line, and waterline as shown on engineering documentation and technical orders. - Must be available to work a flexible schedule as required to keep aircraft modifications on schedule. - Must be a US Citizen. This position is located at a facility that requires special access. - Must acquire an Interim Secret Clearance prior to start. Physical Demands: - Regularly required to lift up to 50 pounds and perform repetitive movements, work overhead, use hands to grasp, handle, and/or feel, reach with hands and arms. - The employee is frequently required to stand, walk, stoop, kneel, squat, crawl, and twist. *IF ELIGIBLE, PROJECT PREMIUM IS AVAILABLE* What's In It For You We offer flexible work schedules to comprehensive benefits investing in your future and security, Learn more about Lockheed Martin's comprehensive benefits package here. Do you want to be part of a company culture that empowers employees to think big, lead with a growth mindset, and make the impossible a reality? We provide the resources and give you the flexibility to enable inspiration and focus -if you have the passion and courage to dream big, work hard, and have fun doing what you love then we want to build a better tomorrow with you. Basic Qualifications: 3+ years of aircraft structural repair experience 3+ years of tool control and FOD prevention experience 2+ years reading and interpreting blueprints Desired Skills: 5th gen fighter (F-22, F-35) structural repair experience Previously awarded a 7 Skill Level USAF (or equivalent Army/Navy/Marine rating) FAA Airframe & Powerplant Certificate Aircraft modifications and maintenance Experience at a US Military site Nose-to-tail maintenance concept Security Clearance Statement: This position requires a government security clearance, you must be a US Citizen for consideration. Clearance Level: Secret Other Important Information You Should Know Expression of Interest: By applying to this job, you are expressing interest in this position and could be considered for other career opportunities where similar skills and requirements have been identified as a match. Should this match be identified you may be contacted for this and future openings. Ability to Work Remotely: Onsite Full-time: The work associated with this position will be performed onsite at a designated Lockheed Martin facility. Work Schedules: Lockheed Martin supports a variety of alternate work schedules that provide additional flexibility to our employees. Schedules range from standard 40 hours over a five day work week while others may be condensed. These condensed schedules provide employees with additional time away from the office and are in addition to our Paid Time off benefits. Schedule for this Position: 4x10 hour day, 3 days off per week Lockheed Martin is an equal opportunity employer. Qualified candidates will be considered without regard to legally protected characteristics. The application window will close in 90 days; applicants are encouraged to apply within 5 - 30 days of the requisition posting date in order to receive optimal consideration. At Lockheed Martin, we use our passion for purposeful innovation to help keep people safe and solve the world's most complex challenges. Our people are some of the greatest minds in the industry and truly make Lockheed Martin a great place to work. With our employees as our priority, we provide diverse career opportunities designed to propel, develop, and boost agility. Our flexible schedules, competitive pay, and comprehensive benefits enable our employees to live a healthy, fulfilling life at and outside of work. We place an emphasis on empowering our employees by fostering an inclusive environment built upon integrity and corporate responsibility. If this sounds like a culture you connect with, you're invited to apply for this role. Or, if you are unsure whether your experience aligns with the requirements of this position, we encourage you to search on Lockheed Martin Jobs, and apply for roles that align with your qualifications. Experience Level: Hourly/Non-Exempt Business Unit: AERONAUTICS COMPANY Relocation Available: Possible Career Area: Technicians Type: Full-Time Shift: Multiple shifts available

Nextant Aerospace is growing and we are in need of multiple Structures Technicians. This is an excellent opportunity to grow with a company that continues to flourish. DUTIES: Layout, fabricate, assemble, mate, install, check or troubleshoot and repair production and prototype aircraft structures, parts and mechanical assemblies Read and interpret information from mechanical/structural, blueprints, planning, process specifications, diagrams, engineering drawings and sketches, and other instructions to determine the methods and sequence of operations to layout, assemble, and install precision parts and assemblies Layout coordinated hole patterns, cutouts, trim lines, mating points, assembly and installation locations using precision measuring instruments and equipment Assemble and mate aircraft parts and assemblies Attach structural parts and assemblies using riveting and hand and power tools, hand trim and finish Drill, route, ream, countersink, spot-face and counter bore parts Modify or rebuild parts to mold line or configuration changes Modify aircraft structure, installation and mechanical systems in accordance with engineering requirements Perform experimental and developmental work operations on experimental aircraft or assemblies Assemble prefabricated parts into assemblies and mate major sections of aircraft assemblies Incorporate major engineering changes and modifications Present a clean and neat work area to customers Perform other duties as assigned QUALIFICATIONS: Minimum of three (3) years of heavy structural experience Minimum of five (5) years of experience with various types of aircraft, powerplant maintenance and inspections Working knowledge of rigging and installation of operating mechanisms structures, assemblies and parts related systems and equipment and assemploy shop practices Requires excellent communication skills The ability to work in a team environment The ability to effectively coordinate with multiple departments Strong planning and organizational skills Valid Drivers License, the ability to achieve airport SIDA badge access

Adams Communication & Engineering Technology (ACET), Incorporated is a Veteran Owned Small Business (VOSB) system engineering and information technology firm, headquartered in Maryland. Incorporated in 1999, we support mission critical Information Technology (IT) business needs for clients within the intelligence community (IC), Department of Defense (DOD), Veteran Administration (VA) and for select commercial clients. ACET, Inc.’s technical, programmatic, and analytical professionals are experts in commercial technology, customized solutions, and proprietary government systems. Job Summary: We are seeking a highly skilled and motivated H-1 Aircraft Sheet Metal/Structure Technician specializing in depot-level modifications and new systems integrations on UH-1Y and AH-1Z aircraft located at MCAS Camp Pendleton, CA. This role is essential to supporting the upgrade modifications, repairs and inspection of aircraft airframes to ensure optimal aircraft readiness and operational capability. Key Responsibilities: Perform depot-level modifications and new structural integrations and existing structures modifications on the airframe. Collaborate with engineers and technical teams to address and resolve complex structural issues to include documenting inconsistencies and non-conformance, redline documentation and suggested install corrective actions. Document all maintenance actions in accordance with applicable regulations and standards. Maintain compliance with quality assurance and safety standards, including adherence to Naval Aviation Maintenance Program (NAMP) COMNAVAIRFORINST 4790 and local SOP and GOPS compliance guidelines. Support aircraft inspections and acceptance procedures and modifications as required. Ensure all tools, test equipment, and consumables are calibrated and maintained per established policies. Qualifications Skill Requirements: Proficient in reading, Interpreting and utilize technical manuals (TD / IDP), blueprints, diagrams and engineering drawings. Perform close tolerance drilling, reaming, removal and installation to critical support structures and fracture critical areas. Locate blind holes necessary for installation of new structural items to existing structure. Split-Sleeve Cold Working. Perform efforts associated with sealing, painting, shimming and preserving structure. Strong knowledge of aircraft and structural principles and techniques specific to aircraft airframes modifications and upgrades. Strong organization and problem-solving skills. Advanced knowledge of aircraft sheet metal / structural modification and repair. Knowledge of aircraft unique tooling such as test equipment, torque wrenches, dial indicators, micrometers, sheet metal breaks, sheers, etc., and ability to operate various hand and power tools safely and effectively. Competence in using precision measuring tools such as scales, micrometers, and calipers for accurate measurement assessments. Install structural aircraft upgrades and modifications as needed. Self-starter and ability to work independently in a team environment. Required: Minimum 5 years of aviation structure maintenance experience. Proficiency in depot-level maintenance procedures and processes. Knowledge of FAA, military, and industry standards. Familiarity with aircraft structures and airframes. Strong verbal and written communication skills for technical documentation and team collaboration. Preferred: Experience on the UH-1Y and/or AH-1Z platform aircraft. FAA Airframe and Powerplant (A&P) license or equivalent military certification. Prior service in a military or government aviation maintenance environment. Aircraft Avionics / Electrician Certifications. Past Quality Assurance or QAR Experience. Physical Requirements: Must be able to lift, push, pull and manipulate 50lbs independently when needed. Must be able to climb on ladders if needed. Must be able to repeatedly enter and exit aircraft using stationary steps/stairs. Position involves long periods of standing, bending, kneeling, squatting, crawling on aircraft structure and around aircraft for maintenance functions. Position may require working in a confined workspace. Position my require use / exposure to fuels, oils, hydraulic fluids and cleaning solvents. Position is located in a high noise area within an aircraft hangar / flightline environment. FIT for Duty Physical is required. May require DOT and Respiratory Physicals. Tools: Employee must own and provide basic hand tools required. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. **All candidates must be a U.S. Citizen to apply** The above job description is not intended to be an all-inclusive list of duties and standards of the position. Drug Free Workplace: ACET is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria are met as outlined in our policies. ACET is an Equal Opportunity / Affirmative Action Employer and VEVRAA Federal Contractor. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to gender, race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

At Boeing, we innovate and collaborate to make the world a better place. We’re committed to fostering an environment for every teammate that’s welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Global Services is searching for F/A-18 Structures Technician at Naval Air Station (NAS) Joint Reserve Base (JRB) New Orleans in Belle Chasse, Louisiana. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at NAS JRB New Orleans in Belle Chasse, Louisiana. This position may be required to work at Stennis Facility in Kiln, Mississippi as required Position Responsibilities: Technician maintains the following: Aircraft structures and associated equipment Remove and install flight surfaces and related components and gear Perform Daily, pre and post flight and periodic aircraft inspections. Perform flight operation activities to include daily, turnaround, launch and recovery including plane captain activities Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Oversees assembly, disassembly or overhaul. Configures aerospace vehicles and bench test equipment. Troubleshoots complex pneumatic, hydraulic and electrical systems to isolate mechanical or electrical faults and repair faulty components. Performs validation/verification testing of systems and components. Documents procedures and established processes to ensure contractual and regulatory compliance (e.g., repairs, test results, applicable modifications and inspection results). Inspects components and verifies repairs for flight worthiness requirements. Oversees training. Works under general direction. Works under general direction. Prioritizes quality, product and people safety This position requires the ability to obtain a U.S. Secret Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Basic Qualifications (Required Skills/Experience): Minimum of 5 years of experience in military fighter aircraft maintenance Willing to work variable shifts; including days, evenings, nights and weekends Must be able to lift up to 35 pounds Minimum of 1 year of experience reading and interpreting technical publications, safety rules, operating and maintenance instructions and procedure manuals Must be able to work outdoors under all types of weather conditions with exposure to loud noise and exhaust fumes Preferred Qualifications (Desired Skills/Experience): Fighter Structural modification experience F/A-18 (AM) Qualifications Prior experience with Navy 4790.1 requirements, is preferred Typical Education/ Experience: Education/experience typically acquired through basic education (e.g. High School diploma/GED) and typically 4 or more years of related work experience or an equivalent combination of education and experience (e.g. vocational school/Associate+2 years of related work, Bachelor, etc.). Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. This position is eligible for a Stipend payment in addition to salary for eligible candidates. At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $59,500 - $80,500 Applications for this position will be accepted through 7/14/25 Applications for this position will be accepted until Jul. 14, 2025 Export Control Requirements: This position must meet export control compliance requirements. To meet export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.15 is required. “U.S. Person” includes U.S. Citizen, lawful permanent resident, refugee, or asylee. Export Control Details: US based job, US Person required Relocation This position offers relocation based on candidate eligibility. Security Clearance This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for 1st shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Description: Pilatus is hiring a Team Leader Aircraft Structures to join our aircraft completions team in Broomfield, CO. In this position, you will be responsible for directing, supporting, and assisting an assigned team in the fabrication and/or installation of aircraft structural modifications. You will also inspect all structures work accomplished by the team to ensure compliance with established specifications, regulations, and quality standards. Take your career to the next level by joining Pilatus Business Aircraft! Pilatus is hiring for the following shift: Monday - Friday, 3:30pm - 12:30am Essential Duties/Responsibilities Leads team of structural technicians and ensures completion of assigned project aircraft within allotted time frame and budget Installs, modifies, and fabricates aircraft structural assemblies and associated components in accordance with engineering drawings, and VV specifications closely aligned with AC43.13-1B Trains, instructs, and orients new team members in associated work assignments to meet production requirements Performs inspections of incoming parts and aircraft incoming and outgoing inspections Ensures work is performed to the highest degree of safety and quality standards per FAA regulations Maintains required records and completes work order tasks in a timely manner Verifies that all technical data utilized is applicable and of current release Performs supervisory responsibilities for a team of assigned technicians, including time card and time off approvals and annual performance reviews Ensures that work accomplished meets customer specifications, established quality standards, and procedures and reports any deviation to appropriate personnel Other Duties/Responsibilities Maintains cleanliness and upkeep of shop equipment, tools, hangar, and work areas Performs additional duties and responsibilities as assigned by the Director System Integration Regular attendance and willingness to work overtime as required Requirements: Skills/Qualifications High school diploma or general education degree (GED) Minimum 5 years of experience with structural fabrication and integration on PC-12 and PC-24 or similar aircraft FAA Airframe License required, A&P preferred Ability to read and interpret engineering drawings and Tech Data Strong written and verbal communication skills Strong attention to detail and uphold high standards of accuracy and quality Proficiency in general computer use and MS Office software, including Excel, Word, and Outlook Must meet the criteria of a U.S. person as defined under ITAR 22 CFR 120.62 What We Offer 11 paid holidays a year, plus 15 days of paid vacation time, and 6 days of paid sick/personal time to start with an increase to 20 days of paid vacation time after 5 years with Pilatus 90% of medical, dental, and vision premiums paid for single coverage and 80% for family coverage, averaging $9,600 annually Monthly health savings account (HSA) contributions totaling $2,250 for single coverage and $3,000 for family coverage annually 401(k) retirement plan matching up to 6% Life and long-term disability insurance premiums paid in full Tuition assistance available annually after the first year The salary range for this position is $31.00 - 41.00 per hour depending on experience. Salary to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data. Pilatus Business Aircraft Ltd was founded in Broomfield, Colorado in 1996. Pilatus’ new 118,000 square foot facility is custom-designed to conduct aircraft interior and exterior completions for all PC-12 NGX and PC-24 aircraft delivering to North and South America. This new completions center consolidates the operations Pilatus has performed at the Rocky Mountain Metropolitan Airport for over 20 years. With over 3,000 employees and about 200 apprentices at its headquarters in Stans, Switzerland and completion center in Broomfield, Colorado, the Pilatus family unites people from over 40 countries. We offer a secure, innovative, international, and sustainable work environment. Courage, vision, and outstanding performance have made us a strong company. Our culture is shaped by a high level of quality awareness, close customer relationships, and a high degree of employee commitment. Pilatus Business Aircraft Ltd provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. To submit a paper application, please mail your resume to 12300 Pilatus Way, Broomfield, CO 80021 Attention: Human Resources. No walk-ins please. If personalized assistance is needed to complete an online application for this position, please email employment.us@pilatus-aircraft.com with your request.

Description: JOB SUMMARY GMRE is currently recruiting for an Aircraft Sheet Metal Technician. This position is day shift and may be eligible for per-diem based on GSA.gov standards. The Aircraft Sheet Metal Technician will perform maintenance and modifications on assigned aircraft. WHY WORK FOR GMRE? GMRE is a small veteran owned company who cares about our employees. We offer health, dental, and vision insurance, 401(k), vacation, Paid Time Off (PTO), or Paid Sick Leave (PSL) based on state laws, paid holidays, and life insurance to all permanent full-time employees. GMRE’s mission is to provide high quality engineering and technical services to help our customers grow and succeed. GMRE is an equal opportunity employer. GMRE is committed to making employment decisions based on valid requirements, without regard to age 40 and over, color, disability, gender identity, genetic information, military or veteran status, national origin, race, religion, sex, sexual orientation or any other applicable status protected by state or local laws. This job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. Requirements: ROLES AND RESPONSIBILITIES The individual in this role will repair, fabricate, modify, reshape, and install aircraft sheet metal parts, items, and assemblies. Must have the ability to follow blueprints, measure for correct alignment, cut sheet metal to size, drill holes, fasten members together by bolting, riveting, glue etc. This work requires knowledge of sheet metal principles involved in aircraft and related equipment. Recommends methods to improve equipment performance and maintenance. Knowledge is mandatory of sheet metal fabrication and repair, concepts and application of maintenance directives. Possess the skill to remove and replace aircraft parts IAW established Technical Data Specifications. Ability to interpret the meaning of symbols used in wiring diagrams, blueprints, and schematics. Must have the ability to properly handle, use, and dispose of hazardous waste and materials. REQUIRED SKILLS/ABILITIES Excellent verbal and written communication skills. Excellent interpersonal and customer service skills. Excellent organizational skills and attention to detail. Excellent time management skills with a proven ability to meet deadlines. Strong analytical and problem-solving skills. Ability to prioritize tasks and to delegate them when appropriate. Ability to function well in a high-paced and at times stressful environment. Ability to maintain regular attendance and punctuality. Ability to work flexible hours and be available to respond on short notice as needed. Ability to maintain professional appearance. EDUCATION AND EXPERIENCE Minimum of five (5) years sheet metal and structures experience in Fighter/Attack/Bomber/Transport (preferably F-16) maintenance as a sheet metal technician. Must possess the skill to remove and replace aircraft parts IAW established Technical Data Specifications. SECURITY CLEARANCE REQUIREMENTS Must have ability to obtain and maintain an active U.S. SECRET clearance and be subject to a government security investigation. Driving or renting a car for company business is expected with some frequency. For insurance purposes, a valid driver’s license is required. PHYSICAL REQUIREMENTS Normal color vision as defined in AFI 48-123. Must be able to lift up to 50 pounds at times. TRAVEL REQUIRED Occasional travel - You may be expected to travel for this position for meetings, trainings, and/or site visits.

Job Description: Sheet Metal Technician IMMEDIATELY HIRING! Sheet Metal Technician FULL-TIME Opportunity in Wichita, KS Starting Wage: $30.00-$40.00/hr. DOE (including 8% Geo-Modifier) The Sheet Metal Technician is responsible for repairs and alterations to all metal and composite structures and maintains Repair Station work orders for work completed. They also review the work scope to ensure all repairs and alterations are performed correctly and on schedule. Responsibilities Conduct repairs on metal and composite structures Read and interpret mechanical drawings Perform major repairs on airframe sheet metal or composite Perform alterations on the airframe by utilizing structural repair manuals and/or blueprints or technical drawings Perform other work on the refurbished/conversion aircraft as directed Install, alter and repair sheet metal products systems utilizing blueprints, drawings and work orders. Plan and coordinate tasks and amount of material required for performance of work. Prepare and implement equipment based on need. Including, but not limited to power saws, drill presses, hand and power shears, pan and box brakes, lockformers, cleat benders, and rollers to cut, punch, thread and form sheet metal. Coordinate and assemble sheet metal products. Tasks include, but are not limited to, solder and bolt connections; apply insulation as required; inspect assemblies and installation for conformance with specifications. Quality Assurance - operational checks of sheet metal installations to determine quality and any necessary corrective action that may need to be taken. Minimum Required Qualifications Four (4) years of experience in sheet metal installation and fabrication. Maintenance experience related specifically to sheet metal products Proven working knowledge and experience in ability to read and interpret blue prints accurately Ability to troubleshoot service issues with systematic, thoughtful, timely and effective solutions and procedures Demonstrate proper and safe use of tools and related equipment Experience in providing quality, professional customer-related services Ability to work and communicate effectively individually as well as in a team environment Ability to work independently in commercial and construction settings. Why Choose Guardian? As a quality air medical transport service, Guardian Flight is one of Global Medical Response’s (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at www.AtaMomentsNotice.com. Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page to learn more about our benefit options.

*JOB LOCATION-CENTENNIAL, CO* *Responsibilities:* - Perform sheet metal repairs and modifications on aircraft structures - Read and interpret blueprints, drawings, and technical manuals - Fabricate and install sheet metal parts using hand tools and power tools - Conduct inspections to identify and troubleshoot structural issues - Weld and rivet sheet metal components as needed - Collaborate with other team members to ensure timely completion of projects - Adhere to safety protocols and maintain a clean work environment *Qualifications*: - Minimum of 4 years of experience as an Aircraft Sheet Metal Mechanic - Knowledge of airframe structures and aircraft maintenance procedures - Proficiency in using hand tools, power tools, and measuring equipment - Ability to read and interpret blueprints, drawings, and technical manuals - Strong mechanical aptitude and problem-solving skills - Ability to work independently and as part of a team - Attention to detail and ability to maintain accurate records * Must be a US citizen * Tools required * DOT drug test and 10 year background check * Per diem available to those that qualify Job Types: Full-time, Contract, Temp-to-hire Pay: $43.00 per hour Expected hours: 40 – 50 per week Benefits: * 401(k) * Dental insurance * Health insurance * Vision insurance Schedule: * 10 hour shift * 8 hour shift * Day shift * Evening shift * Monday to Friday Work Location: In person

*Job Overview* We are seeking a skilled Sheet Metal Aircraft Technician to join our dynamic team. The ideal candidate will possess a strong background in sheet metal fabrication and assembly, with a focus on precision and quality. This role requires proficiency in various tools and techniques used in the aviation industry, ensuring that all components meet stringent safety and performance standards. *Responsibilities:* · Install, repair, inspect, and replace sheet metal components on aircraft, including structural assemblies, and sub-assemblies. · Analyze and understand aircraft blueprints, specifications, and maintenance manuals to make repairs. · Conduct maintenance operations. · Fabricate replacement parts as needed. · Safely operate various tools used for sheet metal applications. · Order supplies, equipment, materials, and parts for repairs and general maintenance. · Assist mechanics with various aircraft maintenance tasks as needed. · Fabricate parts and accessories for PMA. *Required Education and Experience:* · High School Diploma or equivalent required · FAA Airframe and Powerplant license (preferred) · Must be authorized to work in the United States · Proven experience as a Sheet Metal Mechanic or similar role within the aviation industry. · Ability to read and interpret technical drawings, schematics, and specifications accurately · Knowledge of metal, alloys, aircraft adhesives, and sealants · Strong hand eye coordination and proficiency in using tools. · Sufficient physical strength and dexterity to climb on aircraft and manipulate replacement parts. *Job Conditions and Environment:* · Authorized OEM Service Center for Bell Helicopter, Airbus Helicopter, Safran, Rolls Royce, and Pratt &Whitney · FAR Part 145 Repair Station – Bell Helicopter, Airbus Helicopter, MD Helicopter, Sikorsky, & Leonardo · FAA PMA Authorized · Over 30,000 sq. ft. of hangar space · 670 sq. ft. spare parts room for parts inventory and tool control · 485 sq. ft. component overhaul shop · NiCad battery shop · Safran Engine Shop *Additional Requirements:* · Ability to use a computer. · Complete a favorable background check. · Pass an FAA Drug Test · Analytical, problem-solving, and critical thinking skills · Teamwork and interpersonal communication skills · Willingness to travel if needed. · Must be available for nights or weekends if the need arises. · High-level organization skills level organization skills · Mathematically inclined. · Ability to work independently. *Benefits:* · 100% Company Paid Major Medical & Vision Coverage · 50% Company Paid Dental Coverage · Flexible Spending Account (optional) · Life Insurance, STD and LTD coverage (optional) · 401K retirement plan after 1 year employment offering up to 4% company match. · Team Incentive Program (bi-annual after probationary period) fully participate after completing one full semi-annual period (no guarantee of incentive capital percentage) · PTO / Company paid holidays. The above statements provide a brief description of the general nature of work performed and are not intended to be a complete list of responsibilities, duties, and skills required for this position. Duties and expectations are subject to change as needed. _Sterling Helicopter is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status._ Job Type: Full-time Pay: $32.00 - $37.00 per hour Expected hours: No less than 40 per week Benefits: * Referral program Schedule: * 8 hour shift * Day shift * Monday to Friday People with a criminal record are encouraged to apply Work Location: In person

*Join the Mission. Build the Future of National Defense.* Step into a once-in-a-generation opportunity to support a *brand-new, long-term military aircraft program* at the ground level. This is a *$14 billion*, 10-year project backed by the U.S. government—designed to modernize airborne defense capabilities. You’ll be among the *first team members hired*, working on *Boeing 747 heavy modifications* in *cutting-edge, climate-controlled hangars* in *Dayton, Ohio*. *Your Responsibilities:* * Perform *structural modifications* on wide-body, fixed-wing aircraft. * Execute *fabrication, assembly, and installations* of structural components using sheet metal techniques. * Follow detailed engineering drawings and blueprints for complex mod projects. * Work with a dedicated, security-focused team in support of classified aviation upgrades. *What You Bring:* * *3+ years of hands-on experience* in aircraft structural work. * Experience with sheet metal tools (rivet guns, drills, shears, etc.) and proven blueprint reading ability. * Must bring your own tools (shadowed and etched required). * FAA Drug Test compliance required. * *Eligible to obtain a U.S. Secret Security Clearance* (active clearance a plus). * Military aviation background or veterans strongly encouraged to apply. *Why This Role Is Special:* * Be part of the *founding team* of a high-profile U.S. military aviation program. * *Brand-new, climate-controlled hangars* for a top-tier work environment. * Real *career advancement* opportunities. * *Veteran-friendly* workplace with strong support for former military personnel. * Opportunities for *promotion, cross-training*, and potential conversion to a *direct hire* role. *Job Type & Location:* * *Location:* Dayton, Ohio * *Schedule:* Full-time | Flexible shift options * *Type:* Long-term Contract or Contract-to-Hire *Pay and Benefits:* * *$40.00/hr + Per Diem Split (if eligible)* * Weekly pay * Benefits available (eligibility may vary): * Medical, Dental, and Vision Insurance * 401(k) with pre-tax and Roth options * Life Insurance, Short- and Long-Term Disability * 8 paid holidays * Paid Time Off *Workplace Type:* *100% Onsite* | Brand-new, *climate-controlled hangars* *Ready to be part of something big?* This is more than just a job—this is your chance to join the frontlines of innovation in aerospace defense. Apply now and take the first step toward your next mission. Job Types: Full-time, Contract Pay: $40.00 per hour Benefits: * 401(k) * Dental insurance * Health insurance * Vision insurance Schedule: * 8 hour shift * Monday to Friday Ability to Commute: * Dayton, OH 45377 (Preferred) Ability to Relocate: * Dayton, OH 45377: Relocate before starting work (Preferred) Work Location: In person

When applicable, Bombardier promotes flexible and hybrid work policies. Why join us? At Bombardier, we design, build and maintain the world’s peak-performing aircraft for the world’s most discerning people and businesses, governments and militaries. We have been successful in setting the highest standards by putting our people at the heart of it all, and defining excellence, together. Working at Bombardier means operating at the highest level. Every day, you are part of a team that delivers superior experiences and products, pushing the boundaries of what's possible in our industry and beyond. By prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms, because the best work happens when you are free to be yourself and share your unique expertise. Bombardier’s Benefits Program With our employees’ well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: Insurance plans (Dental, medical, life insurance, disability, and more) Competitive base salary Retirement savings plan Employee Assistance Program Tele Health Program What are your contributions to the team? Troubleshoot, repair, inspect and perform maintenance on customer aircraft Fabricate and or modify structural modifications on aircraft parts Perform minor structural repairs on composite components either attached or detached Assist in conducting hidden damage inspection of aircraft structures Assist with complex structural repairs either on or off aircraft Assist with aircraft component repair Remove / install aircraft components as required Comply with environmental health and safety policies/procedures Participate in 5-S activities Perform work in a safe and timely manner Perform and document work performed per appropriate manuals and regulations as required Operate ground support equipment as required Assist with mechanical / electrical removals and installations as needed Assist with maintenance at off-site locations as needed Assist with towing aircraft as needed Assist with other maintenance disciplines as needed Adhere to Bombardier General Work Requirements for factory, shop and/or hanger positions How to thrive in this role? You have received training from a sheet metal aircraft technical school or have equivalent schooling You typically have at least 3 years of Corporate aircraft structural sheet metal repair / modification experience You have the ability to interpret and work with mechanical engineering drawings You have the ability to effectively communicate in both written and verbal form on individual and / or aircraft status You own a basic set of hand tools with the ability to demonstrate Inventory and control of tools You have the ability to obtain appropriate Ground Support Equipment (GSE) qualifications as required You are able to work unscheduled overtime including nonscheduled work days and holidays You are able to work in seasonal/inclement weather outside You have the ability to obtain a Security Identification Display Area badge (SIDA) if applicable You have an A Certification, A&P Certificate or Repairman Certificate (preferred) You have basic PC skills Now that you can see yourself in this role, apply and join the Bombardier Team! Bombardier is committed to being an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by applicable federal, state or local law. Job Technician, Structures - Weekend Shift Primary Location Hartford Service Center Organization Learjet Inc Shift Weekend Employee Status Regular Requisition 8015 Technician, Structures - Weekend Shift